For further information contact your local STMicroelectronics sales office.
May 2012 Doc ID 018594 Rev 3 1/4
4
STM3210C-SK/KEI
Keil™ starter kit for STM32F1 series Connectivity Line
microcontrollers (STM32F107VC MCU)
Data brief
Features
■The Keil MDK-Lite development tools:
– µVision®4 IDE/Debugger for application
programming and debugging
– ARM C/C++ compiler
– RTX real-time kernel, a multi-tasking
operating system for embedded
applications
– MDK-Lite supports applications with up to
32 KB code-size
■ULINK-ME in-circuit debugger/programmer
with USB interface to host PC and 20-pin JTAG
or 10-pin CoreSight debug interface
■Full-featured Keil evaluation board with a
72 MHz STM32F107VC MCU
Description
The Keil starter kit is a complete, cost-effective
solution for starting application development and
evaluating the STMicroelectronics
STM32F105/107 ARM Cortex™-M3 processor-
based microcontrollers.
The STM3210C-SK/KEIL starter kit provides all
the hardware and software you need to start
developing applications for the STM32 ARM core-
based families of microcontrollers. It comes
complete with a full-featured evaluation board
(including Ethernet, USB host and device, CAN,
USARTs, Audio, and QVGA Touchscreen LCD),
Keil's MDK-ARM Lite Edition (32 KB)
development tools, and the ULINK-ME™
(USB/JTAG) adapter.
Keil starter kits are available for a full range of ST
ARM core-based microcontrollers.
Table 1. Device summary
Reference Order code
STM3210C-SK/KEI
for STM32F105/107 series
microcontrollers
STM3210C-SK/KEIL
www.st.com
Starter kit architecture STM3210C-SK/KEI
2/4 Doc ID 018594 Rev 3
Starter kit architecture
Keil development software is a suite of software development tools for creating and
debugging microcontroller applications that includes:
●µVision3® integrated development environment, which integrates the ARM RealView
Compilation Tools and Keil’s debugging software so that users can quickly and easily
develop and debug their applications while they run on a target microcontroller.
●ARM RealView Compilation Tools (RVCT) 32 KB code-size limited version of the
optimizing C/C++ compiler for ARM™ core-based microcontrollers.
●ULINK-ME™ USB/JTAG in-circuit debugger / programmer, which integrates fully with
µVision3, allowing users to download the application to the target and debug it while it
runs on the ST ARM core-based microcontroller on the evaluation board.
●Keil™ evaluation board, an application board that provides a full range of features to
help users evaluate and start developing applications for the included
STM32F107VCTx microcontroller. The Keil MCBSTM32C evaluation board includes
the following key features:
– 20-pin JTAG connector
– 10-pin ARM Cortex-debug connector
– 20-pin trace tool connector
– Power supply from USB
– Motion sensor/ accelerometer
– USART connector
–SPI
–I
2C
– 2 CAN connectors
– Micro USB connector
– Ethernet connector
– 8 user LEDs
– QVGA LCD display with touchscreen
– 8K - External Flash, I2C
– Micro SD/MMC card connector
– Potentiometer connected to ADC
– 4 user and wake-up push buttons
– Reset button
– Wrap area
–Joystick
– Audio: Line-out/ Headphone
– Audio: Line-in/ Microphone
STM3210C-SK/KEI Ordering information
Doc ID 018594 Rev 3 3/4
Ordering information
All Keil starter kits can be ordered from Keil. Starter kits are available from your nearest
STMicroelectronics distributor or sales office for STM32 Connectivity Line microcontrollers
(ST order code: STM3210C-SK/KEIL).
For more information and documentation, please refer to the Keil web site or the
STMicroelectronics microcontroller support site at www.st.com.
Revision history
Table 2. Document revision history
Date Revision Changes
15-Mar-2011 1 Initial release.
26-Apr-2011 2 Added Table 1: Device summary.
11-May-2012 3 Modified Features and Description for clarification.
STM3210C-SK/KEI
4/4 Doc ID 018594 Rev 3
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
