APEM www.apem.com D-41
FM series
Snap-in rocker switches - panel cut-out 19 x 13 (.750 x .508)
Distinctive features and specifications
D
AGENCY APPROVALS
Availability : functions 1 and 6
Marking : approved models are standard marked.
Packaging unit : 150 pieces.
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
❑ Illuminated and non-illuminated
❑ For class II appliances
❑ VDE and UL approved
❑ Protection against moisture by double-shell case
When the switch is submitted to moisture (drops,
condensation), the double-shell case conducts the liquid
outside, thus protecting the contact area and terminals.
The light dripping inside the equipment resulting from
this should be evacuated by adequate arrangement on
back of panel.
❑ Protection by boot
In case of sand or splashing water, the best protection consists of insulating the rocker from
these aggressive elements. This can be achieved with transparent PVC boot U5720. Order
separately, see section H.
EN 61058-1
D-42 APEM www.apem.com
FM series
Snap-in rocker switches - panel cut-out 19 x 13 (.750 x .508)
Single pole - non-illuminated
D
• Mechanical life : 30 000 cycles
• Operating temperature :
-20°C to +85°C
• Case, frame, rocker : PA6/6
• Contacts : silver
• Terminals : silver plated
• Panel cut-out :
• Approved ratings (
functions 1 and 6
) :
VDE : 10(4)A 250VAC T85°C
- UL : 6A 250VAC & 125VAC
T65°C
• Max. contact rating :
- functions 1 and 6 : see above.
- function 3 : 4A 250VAC
- functions 8 and 9 : 6A 250VAC
• Initial contact resistance : 20mΩmax.
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : - functions 1 and 6 : 2.500 Vrms between terminals
- functions 3, 8 and 9 : 1.500 Vrms between terminals
•
Electrical life at full load : 10 000 cycles
Panel thickness
0,75 to 1,25 mm
1,25 to 2 mm
2 to 3 mm
Dim. Y
19,2 +0/-0,1
19,4 +0/-0,1
19,8 +0/-0,1
Dim. Z
12,9 +0,15/-0
12,9 +0,15/-0
12,9 +0,15/-0
FM C A 0 0
SERIES Contacts
ASilver
Lamp
0None
Electrical functions
1 ON - OFF
3MOM - OFF
6ON - ON
8ON OFF MOM
9ON OFF ON
Rocker
CNon illum.
Concave
Terminals
2 Solder lug
8 Quick-conn.
9 Straight PC
(funct. 1 & 6)
Frame colour
2Black
Others : on
request.
Rocker colours
1Blue
2Black (std)
3Green
4Grey
5Yellow
6Red (std)
7Ivory
7/1 White
9Orange
Lens colour
0No lens
Marking *
000 None
001
002
003
004
005
0
0 I
I 0 II
O
FF
O
N
0
I
Single throw and double throw switch
1-2 2-3
FMC1 ON - OFF
FMC3 MOM - OFF
FMC6 ON - ON
FMC8 ON OFF MOM
FMC9 ON OFF ON
Shown with quick-connect terminals
12.80
9.30
21.00
1.50
18.80
7.007.00
0.80
12.50
8.00
4.80
15.00
321
(.275)
(.031)
(.189)
(.492)
(.827)
(.591)
Z
Y
(.740)
(.275) (.504)
(.315) (.059)
(.366)
9
TERMINALS
2
(.11x.031)
(.204)
(.122)
(.051)
1.30
2.80x0.80
3.10
5.20
Solder lug
8
(.185x.031)
(.275)
4.70x0.80
7.00
Quick-connect Straight PC (functions 1 and 6 only)
13.00
(.512)
(.047 x .031)
1.20 x 0.80
* Colour of marking : white for black rockers - black for other colours - Other : on request.
APEM www.apem.com D-43
FM series
Snap-in rocker switches - panel cut-out 19 x 13 (.750 x .508)
Single pole - illuminated
D
• Case, frame and rocker : PA6/6
• Lens : PC
• Contacts : silver
• Terminals : silver plated
• Lamp terminal : no plating
• Fluorescent lamp for blue or green lens,
neon lamp for other colours
• Panel cut-out :
• Approved ratings :
VDE : 10(4)A 250VAC T85°C
- UL : 6A 250VAC & 125VAC
T65°C
• LED types available :
2V (3V max.) 10mA LED (resistor to be series connected by the user)
5V or 12V LED with integrated resistor
• Initial contact resistance : 20mΩmax.
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.500 Vrms between terminals
• Electrical life at full load : 10 000 cycles
• Mechanical life : 30 000 cycles
• Operating temperature: - 20°C to + 85°C
Panel thickness
0,75 to 1,25 mm
1,25 to 2 mm
2 to 3 mm
Dim. Y
19,2 +0/-0,1
19,4 +0/-0,1
19,8 +0/-0,1
Dim. Z
12,9 +0,15/-0
12,9 +0,15/-0
12,9 +0,15/-0
FM L 1 8 A
SERIES Contacts
ASilver
Lamp
A220V neon
B220V fluor.
C110V neon
D110V fluor.
LED 2V 10mA
EBlue
FRed/green
GGreen
HYellow
JWhite
KRed
LOrange
No resistor**
LED 5V
NGreen
PYellow
QRed
LED 12V
TGreen
UYellow
VRed
Electr. function
1 ON - OFF
Rocker
LIllumin.
concave
Terminals
8 Quick-connect
Frame colour
2Black
Others : on
request.
Rocker colour
1Blue
2Black (std)
3Green
4Grey
5Yellow
6Red (std)
7Ivory
7/1 White
9Orange
Lens
colour
1Blue *
3Green *
5Yellow
6Red
8Translucent
9Orange
* w. fluorescent
lamp
Marking *
000 None
001
0
* Colour of marking : white for black rockers - black for other colours - Other : on request.
** Resistor value = supply voltage - LED forward voltage
LED forward current
AUTRES OPTIONS : voir Guide de Codification sur page ci-
Illuminated switches - quick-connect terminals
FML1 ON - OFF
15.00
12.50
21.00
4.80
9.30
1.50
0.80
7.00 12.80
7.00
18.80
8.00
321
132
(.591)
Z
(.827)
(.740)
(.275) (.275)
(.031)
(.189)
(.059)
Y
(.504)
(.492)
(.315)
(.366)
