FRONT FILE NEXT FILE Type N I S S E I UP APS POLYPROPYLENE FILM CAPACITOR Features Dimensions(mm) Its small size saves space of P.C.B. Protected against moisture and solvent through our original epoxy resin vacuum impregnation. Temperature characteristic of capacitance is negative. Tangent of loss angle is very low and its temperature characteristics is "flat." Specifications Temp range Voltage -25+70+85 100 V.d.c Capacitance 0.000100.22F (E-24) Cap. tolerance 1.0%(F)2%(G)5(J) Tangent of loss angle Insulation resistance C0.10F 0.0010 or less C0.10F 0.0012 or less (at 1 kHz) 30,000M or more Endurance 70 WV x140%, 1000hr C/C 3 tan 0.0011 within or less IR 15,000M or more Damp heat 40 9095RH WV 500hr C/C 3 tan 0.0012 or less within IR 10,000 M or more Marked temperature shows operatable range when voltage derated. Straight lead type H 9.0 APS(A) 100V.d.c T P 4.0 3.50.5 8.5 3.5 7.0 9.5 4.0 7.5 10.5 F 5.0 5.00.5 8.0 11.0 4.5 5.0 9.0 12.0 5.5 10.0 13.0 6.0 7.50.5 5.0/7.5 11.0 14.0 6.5 7.0 7.5 8.0 7.5 10.00.5 11.5 12.0 13.0 14.0 15.0 19.5 d 0.5 0.6 8.0 Single formed lead type Double formed lead type Max T 20Min P Cap Cap range W 6.0 Max H 1.5Max Style Max W Type WV APS E-12 CapF 101 0.00010 121 0.00012 151 0.00015 181 0.00018 221 0.00022 271 0.00027 331 0.00033 391 0.00039 471 0.00047 561 0.00056 681 0.00068 821 0.00082 102 0.0010 122 0.0012 152 0.0015 182 0.0018 222 0.0022 272 0.0027 332 0.0033 392 0.0039 472 0.0047 562 0.0056 682 0.0068 822 0.0082 103 0.010 123 0.012 153 0.015 183 0.018 223 0.022 273 0.027 333 0.033 393 0.039 473 0.047 563 0.056 683 0.068 823 0.082 104 0.10 124 0.12 154 0.15 184 0.18 224 0.22 d0.05 101224 5.0Max 5.0Max 3.50.5 5.00.5 5.00.5 5.00.5 F 0.5 123124 F 0.5 F 0.5 134224 F P 101113 3.50.5 0.90.4 3.50.5 F1 0.5 101363 F1=5.0 393124 F1=7.5 3.50.5 0.90.4 3.50.5 F1 0.5 134224 F1=7.5 For a pitch space (F) of the taping specification, refer to "TAPING DIMENSION"on p.5. Caution APS 10 8-14 APS is sensitive for heating due to its construction and film material. Refer to instructions for soldering handling of page 10. When using our capacitors, please consider the application notes on pages 8-14 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics. - 29 - NISSEI PART NUMBER CODE SYSTEM (1) (2) Type (3) Lead Internal con fig use uration (4) Rated voltage (5) CapacitanceCapacitance tolerance value Model Code (Standard "0000") (6) Lead Dimensions Packing Mode code *2 (2) Lead configuration code Code *1 C Lead configuration Typical Code Samples Straight lead Single formed (leads) 5.0 Code 0200 22.5 0225 25.0 0250 27.5 0275 0125 0150 Style Code 1 0200 *4 2 D200 3 D210 Formed leads type Lead taping for automatic insertion machine (Straight leads) 0175 20.0 Lead spacing (F) after forming indicated as multiplied by 10.Always in bulk Type S 17.5 0100 15.0 Lead taping for automatic insertion machine (Formed leads) Code 0075 12.5 Double formed (leads) Lead length multiplied by 10.Always in bulk F (mm) Lead spacing 0050 *3 10.0 V No lead processing and always in bulk (0000) 0050 Cut shorter (cut leads) 7.5 D Description 0000 F (mm) Lead spacing F (6) Lead dimension /Packing mode 4 D220 5 0200 6 0200 Single / Double-formed leads taped and ammo-packed. See p.5 to 6. 0200 (AMZ50V& Straight leads taped and ammo-packed. See p.5 to 6. AMC:C220) Straight leads type *1 The blank square signifies a straight lead type. *2 some types could bear different lead dimension codes, to be confirmed each case. As to reel packing, contact Nissei. *3 a code Cap471 to 393 in Model Code "0000"of AMC type shall be "1050". *4 a code Cap471 to 393 in Model Code "0000"of AMC type shall be "A210". (3) Rated Voltage (V.d.c,V.a.c) Voltage Code 25 35 50 63 100 125 200 250 275 315 400 450 630 800 1000 1250 1600 0025 0035 0050 0063 0100 0125 0200 0250 0275 0315 0400 0450 0450 0800 1000 1250 1600 (4) Capacitance Tolerance Code F G H J K M Tolerance (%) +/- 1 +/- 2 +/- 3 +/- 5 +/- 10 +/- 20 (5) Capacitance Code Capacitance (pF) expressed in 3-digit code. The first two digits: Significant figures of capacitance value. The third digit: The number of zeros to follow the significant figures. Coding Sample 1) Coding of: AMZ 50V, 0.10 microF, +/-5%, SINGLE formed, taped and ammo-packed AMZ V (1) (2) Internal use 0050 (3) J 104 (4) (5) 0000 0200 Model Code (6) (Standard "0000") 2) Coding of MMC 250V 1.0 F +/-10%, single formed with 15.0mm leads, in bulk MMC F (1) (2) Internal use 0250 K 105 (3) (4) (5) 0000 0150 Model Code (6) (Standard "0000") 3) Coding have: MMT 50V 0.1 microF +/-5%, straight lead (in bulk) MMT (1) 0050 (2) Internal use (3) J 104 (4) (5) 0000 0050 Model Code (6) (Standard "0000") When using our capacitors, please consider the application notes on pages 8-15 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics.