MULTILAYER MHI CERAMIC INDUCTOR SPEER ELECTRONICS, INC. MULTILAYER CERAMIC INDUCTOR - Monolithic structure provides high reliability in a wide temperature and humidity range - FHigh quality ceramic material and unique manufacturing process provides high Q at high frequency - Nickel barrier with solder overcoat for excel lent solderability DIMENSIONS [In (mm)] TYPE L 0.0390.004 (1.000.10) W 0.020.004 (0.500.10) H 0.020.004 (0.500.10) P 0.010.004 (0.250.10) 0603 0.0630.006 (1.600.15) 0.0310.006 (0.800.15) 0.0310.006 (0.800.15) 0.0140.006 (0.360.15) 0805 0.0790.008 (2.000.20) 0.0490.008 (1.250.20) 0.0350.008 (0.900.20) 0.0200.010 (0.510.25) 0402 ORDERING & SPECIFYING INFORMATION* MHI 0603 C TE 3N9 S Type Size Code Material Packaging Nominal Inductance Tolerance 0402 0603 0805 Permability Code: C TE: 7" Embossed Plastic TED: 13" Embossed Plastic Non: Bulk 3N9 = 3.9H R10 = 100H S:0.3% T:3% J:10% K:10% M:20% *Please Note: KSE's Part Numbers Do Not Contain any Spaces or Hyphens. TELEPHONE: 814-362-5536 73 FAX: 814-362-8883 CHIP INDUCTORS - Standard EIA packages: 0402, 0603, 0805 MULTILAYER MHI CERAMIC INDUCTOR SPEER ELECTRONICS, INC. STANDARD APPLICATIONS ORDERING INDUCTANCE INDUCTANCE CODE L(nH) MHI0402CTE1N0S* 1.0 MHI0402CTE1N2S* MHI0402CTE1N5S* 1.2 1.5 MHI0402CTE1N8S* MHI0402CTE2N2S* TOLERANCE Q Q Q 100MHZ 100MHZ 100MHZ SELF DC RES. ALLOWABLE OPERATING (MHZ) (MAX) DC CURRENT TEMP TYP (Amps) (Hz) 8 11 34 >4000 0.12 300 8 8 11 11 34 34 >4000 >4000 0.12 0.13 300 300 1.8 2.2 8 8 11 10 30 29 >4000 >4000 0.14 0.16 300 300 MHI0402CTE2N7S* MHI0402CTE3N3** 2.7 3.3 8 8 10 10 29 28 >4000 >4000 0.17 0.19 300 300 MHI0402CTE3N9** MHI0402CTE4N7* 3.9 4.7 8 8 10 10 28 28 >4000 >4000 0.22 0.24 300 300 MHI0402CTE5N6* MHI0402CTE6N8* 5.6 6.8 8 8 10 10 28 28 >4000 >3900 0.27 0.32 300 250 MHI0402CTE8N2* MHI0402CTE10N* 8.2 10 8 8 10 10 28 30 >3600 >3200 0.37 0.42 250 250 MHI0402CTE12N* MHI0402CTE15N* 12 15 8 8 11 11 31 30 >2700 >2300 0.50 0.55 250 250 MHI0402CTE18N* MHI0402CTE22N* 18 22 8 8 11 11 30 30 >2100 >1900 0.65 0.8 200 200 MHI0402CTE27N* MHI0402CTE33N* 27 33 8 8 11 11 27 25 >1600 >1300 0.9 1.0 200 200 MHI0402CTE39N* MHI0402CTE47N* 39 47 8 8 11 11 24 23 >1200 >1000 1.2 1.3 150 150 MHI0402CTE56N* MHI0603CTE1N2* 56 1.2 8 8 11 10 21 40 >750 >6000 1.4 0.10 150 500 MHI0603CTE1N5* MHI0603CTE1N8* 1.5 1.8 8 8 20 10 38 36 >6000 >6000 0.10 0.12 500 500 MHI0603CTE2N2* MHI0603CTE2N7* 2.2 2.7 8 8 10 10 34 32 >6000 >6000 0.16 0.20 500 500 MHI0603CTE3N3* MHI0603CTE3N9* 3.3 3.9 8 8 10 10 30 32 5700 5600 0.22 0.25 500 500 MHI0603CTE4N7* MHI0603CTE5N6* 4.7 5.6 8 8 10 10 32 32 4800 4350 0.28 0.29 500 500 MHI0603CTE6N8* MHI0603CTE8N2* 6.8 8.2 8 8 11 11 32 28 3570 3300 0.30 0.33 500 300 MHI0603CTE10N* MHI0603CTE12N* 10.0 12.0 8 8 11 11 31 30 2850 2700 0.35 0.40 300 300 MHI0603CTE15N* MHI0603CTE18N* 15.0 18.0 8 8 11 11 26 25 2400 2050 0.45 0.50 300 300 MHI0603CTE22N* MHI0603CTE27N* 22.0 27.0 T(3%) 8 8 14 14 30 26 1850 1750 0.56 0.60 300 300 MHI0603CTE33N* MHI0603CTE39N* 33.0 39.0 J(5%) K(10%) 8 8 14 14 24 20 1500 1350 0.65 0.70 300 300 MHI0603CTE47N* MHI0805CTE1N5* 47.0 1.5 8 10 14 13 18 40 1200 >6000 0.90 0.10 300 500 (MIN) (TYP) (TYP) CHIP INDUCTORS S(0.3nH) S(0.3nH) K(10%) J(=5%) K(10%) S(0.3nH) S(0.3nH) K(10%) J(=5%) K(10%) TELEPHONE: 814-362-5536 74 -40C TO 125C FAX: 814-362-8883 MULTILAYER MHI CERAMIC INDUCTOR SPEER ELECTRONICS, INC. ORDERING INDUCTANCE INDUCTANCE CODE L(nH) TOLERANCE MHI0805CTE1N8* 1.8 S(0.3NH) MHI0805CTE2N2* MHI0805CTE2N7* Q Q Q 100MHZ 100MHZ 100MHZ SELF DC RES. ALLOWABLE OPERATING (MHZ) (MAX) DC CURRENT TEMP TYP (Amps) (Hz) 10 13 45 >6000 0.10 500 2.2 2.7 10 10 13 12 48 36 >6000 >6000 0.10 0.10 500 500 MHI0805CTE3N3* MHI0805CTE3N9* 3.3 3.9 S(0.3NH) 10 10 13 15 56 54 >6000 5400 0.13 0.15 500 500 MHI0805CTE4N7* MHI0805CTE5N6* 4.7 5.6 K(10%) M(20%) 10 10 15 15 50 53 4500 4000 0.20 0.23 500 500 MHI0805CTE6N8* MHI0805CTE8N2* 6.8 8.2 10 10 15 15 51 53 3650 3000 0.25 0.28 500 500 -40C MHI0805CTE10N* MHI0805CTE12N* 10.0 12.0 10 10 16 16 45 48 2500 2450 0.30 0.35 500 300 TO 125C MHI0805CTE15N* MHI0805CTE18N* 15.0 18.0 (J5%) 10 10 17 17 48 43 2000 1750 0.40 0.45 300 300 MHI0805CTE22N* MHI0805CTE27N* 22.0 27.0 K(10%) M(20%) 10 10 17 18 47 38 1700 1550 0.50 0.56 300 300 MHI0805CTE33N* MHI0805CTE39N* 33.0 39.0 10 10 18 18 35 40 1350 1300 0.60 0.65 300 300 MHI0805CTE47N* MHI0805CTE56N* 47.0 56.0 10 10 18 19 33 31 1200 1150 0.70 0.75 300 300 MHI0805CTE68N* MHI0805CTE82N* 68.0 82.0 10 10 19 20 28 9 1000 850 0.85 0.90 200 200 MHI0805CTER10* 100 10 18 - 730 1.00 200 (MIN) (TYP) (TYP) TE: EMBOSSED PLASTIC *ADD TOLERANCE CHARACTER (S,J,K,M) TELEPHONE: 814-362-5536 75 FAX: 814-362-8883 CHIP INDUCTORS STANDARD APPLICATIONS MULTILAYER FERRITE MCB/MCP/MCI/MHI INDUCTOR SPEER ELECTRONICS, INC. ENVIRONMENTAL & MECHANICAL CHARACTERISTICS PARAMETER REQUIREMENT TEST METHOD CHIP INDUCTORS Operating Temperature -550C+1250C Storage Temperature 400C @ 70% Humidity. Sealed plastic bags withdesiccant shall be used to reduce the potential of oxidation on the terminations during storage Resistance to Solder Heat Change in Impedance: Relative to value before test 20%. Appearance: There shall be no cracking Solder Coverage: More than 75% of the terminal electrode shall be covered with solder. Flux: 5-10 sec dip After Flux: Air dry for 15 sec Preheat: 1 500C 1 0C Preheat Time: 60 sec Solder Temp: 260C 5C Dip Time: 10 1 sec Solderability Solder Coverage: More than 95% of the termination shall be covered with solder. Flux: 5-10 sec dip After Flux: Air dry for 15 sec Solder Temp: 245C 50C Dip Time: 5 0.5 sec Leach Resistance Appearance: There shall be no visible signs of physical or mechanical damage (i.e. no cracks). Terminations: Termination must not be leached away for more than 5%. The bead shall be subjected to the following 5 steps for the period of time shown below. The 5 steps constitute one (1) rotation. 4 rotations shall be carried out. 1) Flux: 5-10 sec 2) After Flux: Air dry for 15 sec 3) Solder Temp: 230C 5C 4) Dip Time: 5 0.5 sec 5 )Cool: Air cool for 60 seconds Insulation Resistance Insulation Resistance: Mm 1G ohms Solvent Resistance Change in Impedance: Relative to value before test 10%. Terminal Strength (hanging test) Appearance: The terminal electrode shall not break off, nor shall there be damage to the body. Terminal Strength (push test) Appearance: There shall be no evidence of mechanical degradations to terminals or body. TELEPHONE: 814-362-5536 76 Cleaning by: Washer: Ultrasonic washer (100W) Solvent: Isopropyl alcohol Time: 3 minutes Type 0402 0603 0805 1206 Type 0402 0603 0805 1206 W(kgf) 0.5 1 .0 1.5 W(kgf) 1.4 1.8 2.3 Time NA 30 sec 2 sec 30 sec 2 sec 30 sec 2sec Time NA 60 sec 60 sec 60 sec FAX: 814-362-8883 MULTILAYER FERRITE MCB/MCP/MCI/MHI INDUCTOR SPEER ELECTRONICS, INC. Item Requirement Conditions Bending Strength Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value before test 10% Board: 90x40x1 .6mm Bend: 1mm Time: 5 sec Mechanical Shock Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value before test 10% Force: 5OC Time: 11 msec There shall be 3 shocks in each of 6 directions (18 shocks total).me Vibration Impedance: Relative to initial value 10%. Only endurance conditioning by sweeping shall be made. The entire frequency range from 10-2,000Hz return to10Hz in 20 minutes (this shall constitute one cycle). Amplitude:1.5mm The test shall have a 1 SC peak and Shall be applied for a period of 4 hours (12 cycles) in each of 3 m mutually perpendicular directions (a t total of 36 cycles within a total of 12 hours). Thermal Shock Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value 20%. DCR: The DOR shall not exceed initial specified value. Step Temperature 1-start -40C 200 2-hold -40C 200 3-transfer 4-hold +1050 200 5-transfer Testing of the parts will be made at 0 hours, 250 hours and 500 hours. Before testing, t he parts shall be allowed to cool to room temperature for 24 hours. Load Humidity Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value 15%. Time 30 mm 5 mm 0.5 mm max. 30 mm 5 mm 0.5 mm max. Steps 1 thru 5 constitute one complete cycle and the test shall consist of a total of 500 cycles. Temperature: 85C 200 Relative Humidity: 85% Time: 1,000 hours total Apply: 1 OO%rated current Measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. Life Test Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value 15% Temperature: 85C 2C Time: 1,000 hours total Apply: 100% rated current Measurements shall be taken at 0 hours, 250 hours, 5OO hours and 1,000 hours and shall meet the conditions stated above. TELEPHONE: 814-362-5536 77 FAX: 814-362-8883 CHIP INDUCTORS ENVIRONMENTAL & MECHANICAL CHARACTERISTICS