74AHC1G09 2-input AND gate with open-drain output Rev. 02 -- 18 December 2007 Product data sheet 1. General description The 74AHC1G09 is a high-speed Si-gate CMOS device. The 74AHC1G09 provides the 2-input AND function with open-drain output. The output of the 74AHC1G09 is an open drain and can be connected to other open-drain outputs to implement active-LOW, wired-OR or active-HIGH wired-AND functions. For digital operation this device must have a pull-up resistor to establish a logic HIGH level. 2. Features High noise immunity Low power dissipation SOT353-1 and SOT753 package options ESD protection: HBM JESD22-A114E: exceeds 2000 V MM JESD22-A115-A: exceeds 200 V CDM JESD22-C101C: exceeds 1000 V Specified from -40 C to +85 C and from -40 C to +125 C. 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74AHC1G09GW -40 C to +125 C TSSOP5 plastic thin shrink small outline package; 5 leads; body width 1.25 mm SOT353-1 74AHC1G09GV -40 C to +125 C SC-74A plastic surface-mounted package; 5 leads SOT753 4. Marking Table 2. Marking Type number Marking code 74AHC1G09GW A9 74AHC1G09GV A09 74AHC1G09 Nexperia 2-input AND gate with open-drain output 5. Functional diagram Y A B A 1 4 2 1 Y & 2 001aad598 Fig 1. Logic symbol 4 GND B 001aad599 001aad600 Fig 2. IEC logic symbol Fig 3. Logic diagram 6. Pinning information 6.1 Pinning B 1 A 2 GND 3 5 VCC 4 Y 09 001aad601 Fig 4. Pin configuration SOT353-1 (TSSOP5) and SOT753 (SC-74A) 6.2 Pin description Table 3. Pin description Symbol Pin Description B 1 data input B A 2 data input A GND 3 ground (0 V) Y 4 data output Y VCC 5 supply voltage 7. Functional description Table 4. Function table[1] Input Output A B L L L L H L H L L H H Z [1] Y H = HIGH voltage level; L = LOW voltage level; Z = high-impedance OFF-state. (c) 74AHC1G09_2 Product data sheet Rev. 02 -- 18 December 2007 Nexperia B.V. 2017. All rights reserved 2 of 10 74AHC1G09 Nexperia 2-input AND gate with open-drain output 8. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions VCC supply voltage Min Max Unit -0.5 +7.0 V [1] -0.5 +7.0 V active mode [1] -0.5 +7.0 V high-impedance mode [1] -0.5 +7.0 V input clamping current VI < -0.5 V [1] - -20 mA IOK output clamping current VO < -0.5 V [1] IO output current VO > -0.5 V ICC VI input voltage VO output voltage IIK - 20 mA - 25 mA supply current - 75 mA IGND GND current - 75 mA Tstg storage temperature -65 +150 C Ptot total power dissipation - 250 mW Tamb = -40 C to +125 C [2] [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For TSSOP5 and SC-74A packages: above 87.5 C the value of Ptot derates linearly with 4.0 mW/K. 9. Recommended operating conditions Table 6. Recommended operating operations Symbol Parameter Conditions Min Typ Max Unit VCC supply voltage 2.0 5.0 5.5 V VI input voltage 0 - 5.5 V VO output voltage active mode 0 - VCC V high-impedance mode 0 - 6.0 V Tamb ambient temperature -40 +25 +125 C t/V input transition rise and fall rate VCC = 3.0 V to 3.6 V - - 100 ns/V VCC = 4.5 V to 5.5 V - - 20 ns/V 10. Static characteristics Table 7. Static characteristics Voltages are referenced to GND (ground = 0 V). Symbol Parameter VIH VIL HIGH-level input voltage LOW-level input voltage 25 C Conditions -40 C to +85 C -40 C to +125 C Unit Min Typ Max Min Max Min Max VCC = 2.0 V 1.5 - - 1.5 - 1.5 - V VCC = 3.0 V 2.1 - - 2.1 - 2.1 - V VCC = 5.5 V 3.85 - - 3.85 - 3.85 - V VCC = 2.0 V - - 0.5 - 0.5 - 0.5 V VCC = 3.0 V - - 0.9 - 0.9 - 0.9 V VCC = 5.5 V - - 1.65 - 1.65 - 1.65 V (c) 74AHC1G09_2 Product data sheet Rev. 02 -- 18 December 2007 Nexperia B.V. 2017. All rights reserved 3 of 10 74AHC1G09 Nexperia 2-input AND gate with open-drain output Table 7. Static characteristics ...continued Voltages are referenced to GND (ground = 0 V). Symbol Parameter VOL 25 C Conditions -40 C to +85 C -40 C to +125 C Unit Min Typ Max Min Max Min Max LOW-level VI = VIH or VIL output voltage IO = 50 A; VCC = 2.0 V - 0 0.1 - 0.1 - 0.1 V IO = 50 A; VCC = 3.0 V - 0 0.1 - 0.1 - 0.1 V IO = 50 A; VCC = 4.5 V - 0 0.1 - 0.1 - 0.1 V IO = 4.0 mA; VCC = 3.0 V - - 0.36 - 0.44 - 0.55 V IO = 8.0 mA; VCC = 4.5 V - - 0.36 - 0.44 - 0.55 V - - 0.1 - 1.0 - 2.0 A OFF-state VI = VIH or VIL; VO = VCC or output current GND; VCC = 5.5 V - - 0.25 10.0 A ICC supply current VI = VCC or GND; IO = 0 A; VCC = 5.5 V - - 1.0 - 10 - 20 A CI input capacitance - 1.5 10 - 10 - 10 pF II input leakage current IOZ VI = 5.5 V or GND; VCC = 0 V to 5.5 V 2.5 11. Dynamic characteristics Table 8. Dynamic characteristics GND = 0 V; for test circuit see Figure 6. Symbol Parameter 25 C Conditions Min VCC = 3.0 V to 3.6 V CL = 50 pF VCC = 4.5 V to 5.5 V Max Min Max - 4.6 7.5 1.0 8.5 1.0 9.0 ns - 6.5 11.0 1.5 12.0 1.5 12.5 ns - 3.2 5.5 1.0 6.5 1.0 7.0 ns - 4.6 7.5 1.5 8.0 1.5 8.5 ns - 5 - - - - - pF [3] CL = 15 pF CL = 50 pF power dissipation capacitance Min [2] CL = 15 pF CPD Typ Max [1] propagation delay A and B to Y; see Figure 5 tpd -40 C to +85 C -40 C to +125 C Unit CL = 50 pF; fi = 1 MHz; VI = GND to VCC [4] [1] tpd is the same as tPZL and tPLZ. [2] Typical values are measured at VCC = 3.3 V. [3] Typical values are measured at VCC = 5.0 V. [4] CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; (CL x VCC2 x fo) = dissipation due to the output if the combination of the pull up voltage and resistance results in VCC at the output. (c) 74AHC1G09_2 Product data sheet Rev. 02 -- 18 December 2007 Nexperia B.V. 2017. All rights reserved 4 of 10 74AHC1G09 Nexperia 2-input AND gate with open-drain output 12. Waveforms VI A, B input VM GND t PLZ t PZL VCC Y output VM VX VOL 001aad602 Measurement points are given in Table 9. VOL is the typical voltage output level that occur with the output load. Fig 5. The data input (A, B) to output (Y) propagation delays Table 9. Measurement points Input Output VM VM VX 0.5VCC 0.5VCC VOL + 0.3 V S1 VCC PULSE GENERATOR VI RL = 1000 VO VCC open GND D.U.T. CL RT mna232 Test data is given in Table 10. Definitions for test circuit: CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to output impedance Zo of the pulse generator. Fig 6. Load circuit for switching times Table 10. Test data Input Load S1 VI tr, tf RL CL tPHZ, tPZH tPLZ, tPZL tPLH, tPHL GND to VCC 3.0 ns 1000 15 pF GND VCC open GND to VCC 3.0 ns 1000 50 pF GND VCC open (c) 74AHC1G09_2 Product data sheet Rev. 02 -- 18 December 2007 Nexperia B.V. 2017. All rights reserved 5 of 10 74AHC1G09 Nexperia 2-input AND gate with open-drain output 13. Package outline TSSOP5: plastic thin shrink small outline package; 5 leads; body width 1.25 mm E D SOT353-1 A X c y HE v M A Z 5 4 A2 A (A3) A1 1 Lp 3 L e w M bp detail X e1 0 1.5 3 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D(1) E(1) e e1 HE L Lp v w y Z(1) mm 1.1 0.1 0 1.0 0.8 0.15 0.30 0.15 0.25 0.08 2.25 1.85 1.35 1.15 0.65 1.3 2.25 2.0 0.425 0.46 0.21 0.3 0.1 0.1 0.60 0.15 7 0 Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT353-1 REFERENCES IEC JEDEC JEITA MO-203 SC-88A EUROPEAN PROJECTION ISSUE DATE 00-09-01 03-02-19 Fig 7. Package outline SOT353-1 (TSSOP5) (c) 74AHC1G09_2 Product data sheet Rev. 02 -- 18 December 2007 Nexperia B.V. 2017. All rights reserved 6 of 10 74AHC1G09 Nexperia 2-input AND gate with open-drain output Plastic surface-mounted package; 5 leads SOT753 D E B y A X HE 5 v M A 4 Q A A1 c 1 2 3 Lp detail X bp e w M B 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 bp c D E e HE Lp Q v w y mm 1.1 0.9 0.100 0.013 0.40 0.25 0.26 0.10 3.1 2.7 1.7 1.3 0.95 3.0 2.5 0.6 0.2 0.33 0.23 0.2 0.2 0.1 OUTLINE VERSION REFERENCES IEC JEDEC SOT753 JEITA EUROPEAN PROJECTION ISSUE DATE 02-04-16 06-03-16 SC-74A Fig 8. Package outline SOT753 (SC-74A) (c) 74AHC1G09_2 Product data sheet Rev. 02 -- 18 December 2007 Nexperia B.V. 2017. All rights reserved 7 of 10 74AHC1G09 Nexperia 2-input AND gate with open-drain output 14. Abbreviations Table 11. Abbreviations Acronym Description CDM Charged Device Model DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model 15. Revision history Table 12. Revision history Document ID Release date Data sheet status Change notice Supersedes 74AHC1G09_2 20071218 Product data sheet - 74AHC1G09_1 Modifications: 74AHC1G09_1 * The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. * * * Legal texts have been adapted to the new company name where appropriate. Package SOT753 added to Section 3, Section 4 and Section 13. Quick reference data section removed. 20050926 Product data sheet - (c) 74AHC1G09_2 Product data sheet - Rev. 02 -- 18 December 2007 Nexperia B.V. 2017. All rights reserved 8 of 10 74AHC1G09 Nexperia 2-input AND gate with open-drain output 16. Legal information 16.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term `short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com. 16.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 16.3 Disclaimers General -- Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes -- Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- Nexperia products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia accepts no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale -- Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by Nexperia. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. 16.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 17. Contact information For additional information, please visit: http://www.nexperia.com For sales office addresses, send an email to: salesaddresses@nexperia.com (c) 74AHC1G09_2 Product data sheet Rev. 02 -- 18 December 2007 Nexperia B.V. 2017. All rights reserved 9 of 10 Nexperia 74AHC1G09 2-input AND gate with open-drain output 18. Contents 1 2 3 4 5 6 6.1 6.2 7 8 9 10 11 12 13 14 15 16 16.1 16.2 16.3 16.4 17 18 (c) General description . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 1 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functional description . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Recommended operating conditions. . . . . . . . 3 Static characteristics. . . . . . . . . . . . . . . . . . . . . 3 Dynamic characteristics . . . . . . . . . . . . . . . . . . 4 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 8 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Contact information. . . . . . . . . . . . . . . . . . . . . . 9 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Nexperia B.V. 2017. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 18 December 2007