74AHC1G09GV,125 - NEXPERIA

1. General description

The 74AHC1G09 is a high-speed Si-gate CMOS device.

The 74AHC1G09 provides the 2-input AND function with open-drain output.

The output of the 74AHC1G09 is an open drain and can be connected to other open-drain

outputs to implement active-LOW, wired-OR or active-HIGH wired-AND functions. For

digital operation this device must have a pull-up resistor to establish a logic HIGH level.

2. Features

■High noise immunity

■Low power dissipation

■SOT353-1 and SOT753 package options

■ESD protection:

◆HBM JESD22-A114E: exceeds 2000 V

◆MM JESD22-A115-A: exceeds 200 V

◆CDM JESD22-C101C: exceeds 1000 V

■Speciﬁed from −40 °Cto+85°C and from −40 °C to +125 °C.

3. Ordering information

4. Marking

74AHC1G09

2-input AND gate with open-drain output

Rev. 02 — 18 December 2007 Product data sheet

Table 1. Ordering information

Type number Package

Temperature range Name Description Version

74AHC1G09GW −40 °C to +125 °C TSSOP5 plastic thin shrink small outline package; 5 leads;

body width 1.25 mm SOT353-1

74AHC1G09GV −40 °C to +125 °C SC-74A plastic surface-mounted package; 5 leads SOT753

Table 2. Marking

Type number Marking code

74AHC1G09GW A9

74AHC1G09GV A09

74AHC1G09_2

Product data sheet Rev. 02 — 18 December 2007 2 of 10

Nexperia 74AHC1G09

2-input AND gate with open-drain output

5. Functional diagram

6. Pinning information

6.1 Pinning

6.2 Pin description

7. Functional description

[1] H = HIGH voltage level; L = LOW voltage level; Z = high-impedance OFF-state.

Fig 1. Logic symbol Fig 2. IEC logic symbol Fig 3. Logic diagram

001aad598

A24

001aad599

001aad600

GND

Fig 4. Pin conﬁguration SOT353-1 (TSSOP5) and SOT753 (SC-74A)

GND Y

001aad601

Table 3. Pin description

Symbol Pin Description

B 1 data input B

A 2 data input A

GND 3 ground (0 V)

Y 4 data output Y

VCC 5 supply voltage

Table 4. Function table[1]

Input Output

ABY

LLL

LHL

HLL

HHZ

74AHC1G09_2

Product data sheet Rev. 02 — 18 December 2007 3 of 10

Nexperia 74AHC1G09

2-input AND gate with open-drain output

8. Limiting values

[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

[2] For TSSOP5 and SC-74A packages: above 87.5 °C the value of Ptot derates linearly with 4.0 mW/K.

9. Recommended operating conditions

10. Static characteristics

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions Min Max Unit

VCC supply voltage −0.5 +7.0 V

VIinput voltage [1] −0.5 +7.0 V

VOoutput voltage active mode [1] −0.5 +7.0 V

high-impedance mode [1] −0.5 +7.0 V

IIK input clamping current VI<−0.5 V [1] -−20 mA

IOK output clamping current VO<−0.5 V [1] -±20 mA

IOoutput current VO>−0.5 V - 25 mA

ICC supply current - ±75 mA

IGND GND current - ±75 mA

Tstg storage temperature −65 +150 °C

Ptot total power dissipation Tamb =−40 °C to +125 °C[2] - 250 mW

Table 6. Recommended operating operations

Symbol Parameter Conditions Min Typ Max Unit

VCC supply voltage 2.0 5.0 5.5 V

VIinput voltage 0 - 5.5 V

VOoutput voltage active mode 0 - VCC V

high-impedance mode 0 - 6.0 V

Tamb ambient temperature −40 +25 +125 °C

∆t/∆V input transition rise and fall rate VCC = 3.0 V to 3.6 V - - 100 ns/V

VCC = 4.5 V to 5.5 V - - 20 ns/V

Table 7. Static characteristics

Voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions 25 °C−40 °C to +85 °C−40 °C to +125 °C Unit

Min Typ Max Min Max Min Max

VIH HIGH-level

input voltage VCC = 2.0 V 1.5 - - 1.5 - 1.5 - V

VCC = 3.0 V 2.1 - - 2.1 - 2.1 - V

VCC = 5.5 V 3.85 - - 3.85 - 3.85 - V

VIL LOW-level

input voltage VCC = 2.0 V - - 0.5 - 0.5 - 0.5 V

VCC = 3.0 V - - 0.9 - 0.9 - 0.9 V

VCC = 5.5 V - - 1.65 - 1.65 - 1.65 V

74AHC1G09_2

Product data sheet Rev. 02 — 18 December 2007 4 of 10

Nexperia 74AHC1G09

2-input AND gate with open-drain output

11. Dynamic characteristics

[1] tpd is the same as tPZL and tPLZ.

[2] Typical values are measured at VCC = 3.3 V.

[3] Typical values are measured at VCC = 5.0 V.

[4] CPD is used to determine the dynamic power dissipation (PDin µW).

PD=C

PD ×VCC2×fi×N + (CL×VCC2×fo) where:

fi= input frequency in MHz;

fo= output frequency in MHz;

CL= output load capacitance in pF;

VCC = supply voltage in V;

N = number of inputs switching;

(CL×VCC2×fo) = dissipation due to the output if the combination of the pull up voltage and resistance results in VCC at the output.

VOL LOW-level

output voltage VI= VIH or VIL

IO= 50 µA; VCC = 2.0 V - 0 0.1 - 0.1 - 0.1 V

IO= 50 µA; VCC = 3.0 V - 0 0.1 - 0.1 - 0.1 V

IO= 50 µA; VCC = 4.5 V - 0 0.1 - 0.1 - 0.1 V

IO= 4.0 mA; VCC = 3.0 V - - 0.36 - 0.44 - 0.55 V

IO= 8.0 mA; VCC = 4.5 V - - 0.36 - 0.44 - 0.55 V

IIinput leakage

current VI= 5.5 Vor GND;

VCC = 0 V to 5.5 V --±0.1 - ±1.0 - ±2.0 µA

IOZ OFF-state

output current VI= VIH or VIL; VO = VCC or

GND; VCC = 5.5 V --±0.25 ±2.5 ±10.0 µA

ICC supply current VI=V

CC or GND; IO = 0 A;

VCC = 5.5 V - - 1.0 - 10 - 20 µA

CIinput

capacitance - 1.5 10 - 10 - 10 pF

Table 7. Static characteristics

…continued

Voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions 25 °C−40 °C to +85 °C−40 °C to +125 °C Unit

Min Typ Max Min Max Min Max

Table 8. Dynamic characteristics

GND = 0 V; for test circuit see Figure 6.

Symbol Parameter Conditions 25 °C−40 °C to +85 °C−40 °C to +125 °C Unit

Min Typ Max Min Max Min Max

tpd propagation delay A and B to Y;

see Figure 5 [1]

VCC = 3.0 V to 3.6 V [2]

CL= 15 pF - 4.6 7.5 1.0 8.5 1.0 9.0 ns

CL= 50 pF - 6.5 11.0 1.5 12.0 1.5 12.5 ns

VCC = 4.5 V to 5.5 V [3]

CL= 15 pF - 3.2 5.5 1.0 6.5 1.0 7.0 ns

CL= 50 pF - 4.6 7.5 1.5 8.0 1.5 8.5 ns

CPD power dissipation

capacitance CL= 50 pF; fi= 1 MHz;

VI= GND to VCC

[4] -5- - - - - pF

74AHC1G09_2

Product data sheet Rev. 02 — 18 December 2007 5 of 10

Nexperia 74AHC1G09

2-input AND gate with open-drain output

12. Waveforms

Measurement points are given in Table 9.

VOL is the typical voltage output level that occur with the output load.

Fig 5. The data input (A, B) to output (Y) propagation delays

001aad602

tPZL

tPLZ

GND

VCC

VOL

Y output

A, B input

Table 9. Measurement points

Input Output

VMVMVX

0.5VCC 0.5VCC VOL + 0.3 V

Test data is given in Table 10.

Deﬁnitions for test circuit:

CL = Load capacitance including jig and probe capacitance.

RT = Termination resistance should be equal to output impedance Zo of the pulse generator.

Fig 6. Load circuit for switching times

open

GND

VCC

VIVO

mna232

D.U.T.

RL =

1000 Ω

PULSE

GENERATOR

Table 10. Test data

Input Load S1

VItr, tfRLCLtPHZ, tPZH tPLZ, tPZL tPLH, tPHL

GND to VCC ≤ 3.0 ns 1000 Ω15 pF GND VCC open

GND to VCC ≤ 3.0 ns 1000 Ω50 pF GND VCC open

74AHC1G09_2

Product data sheet Rev. 02 — 18 December 2007 6 of 10

Nexperia 74AHC1G09

2-input AND gate with open-drain output

13. Package outline

Fig 7. Package outline SOT353-1 (TSSOP5)

UNIT A1

max. A2A3bpLHELpwyv

ceD(1) E(1) Z(1) θ

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

mm 0.1

01.0

0.8 0.30

0.15 0.25

0.08 2.25

1.85 1.35

1.15 0.65

1.3 2.25

2.0 0.60

0.15 7°

0°

0.1 0.10.30.425

DIMENSIONS (mm are the original dimensions)

Note

1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

0.46

0.21

SOT353-1 MO-203 SC-88A 00-09-01

03-02-19

0.15

(A3)

detail X

vMA

1.5 3 mm0

scale

TSSOP5: plastic thin shrink small outline package; 5 leads; body width 1.25 mm SOT353-1

1.1

74AHC1G09_2

Product data sheet Rev. 02 — 18 December 2007 7 of 10

Nexperia 74AHC1G09

2-input AND gate with open-drain output

Fig 8. Package outline SOT753 (SC-74A)

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

SOT753 SC-74A

wBM

detail X

vMA

0 1 2 mm

scale

132

Plastic surface-mounted package; 5 leads SOT753

UNIT A1bpcDEHELpQywv

mm 0.100

0.013 0.40

0.25 3.1

2.7

0.26

0.10 1.7

1.3

0.95 3.0

2.5 0.2 0.10.2

DIMENSIONS (mm are the original dimensions)

0.6

0.2 0.33

0.23

1.1

0.9

02-04-16

06-03-16

74AHC1G09_2

Product data sheet Rev. 02 — 18 December 2007 8 of 10

Nexperia 74AHC1G09

2-input AND gate with open-drain output

14. Abbreviations

15. Revision history

Table 11. Abbreviations

Acronym Description

CDM Charged Device Model

DUT Device Under Test

ESD ElectroStatic Discharge

HBM Human Body Model

MM Machine Model

Table 12. Revision history

Document ID Release date Data sheet status Change notice Supersedes

74AHC1G09_2 20071218 Product data sheet - 74AHC1G09_1

Modiﬁcations: •The format of this data sheet has been redesigned to comply with the new identity guidelines

of NXP Semiconductors.

•Legal texts have been adapted to the new company name where appropriate.

•Package SOT753 added to Section 3,Section 4 and Section 13.

•Quick reference data section removed.

74AHC1G09_1 20050926 Product data sheet - -

74AHC1G09_2

Product data sheet Rev. 02 — 18 December 2007 9 of 10

Nexperia 74AHC1G09

2-input AND gate with open-drain output

16. Legal information

16.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term ‘short data sheet’ is explained in section “Deﬁnitions”.

[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status

information is available on the Internet at URL http://www.nexperia.com.

16.2 Deﬁnitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modiﬁcations or additions. Nexperia does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liability for the consequences of

use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is intended

for quick reference only and should not be relied upon to contain detailed and

full information. For detailed and full information see the relevant full data

sheet, which is available on request via the local Nexperia sales

ofﬁce. In case of any inconsistency or conﬂict with the short data sheet, the

full data sheet shall prevail.

16.3 Disclaimers

General — Information in this document is believed to be accurate and

reliable.However,Nexperiadoesnotgiveanyrepresentationsor

warranties, expressed or implied, as to the accuracy or completeness of such

information and shall have no liability for the consequences of use of such

information.

Right to make changes — Nexperiareservestherighttomake

changes to information published in this document, including without

limitation speciﬁcations and product descriptions, at any time and without

notice. This document supersedes and replaces all information supplied prior

to the publication hereof.

Suitability for use — Nexperia products are not designed,

authorized or warranted to be suitable for use in medical, military, aircraft,

space or life support equipment, nor in applications where failure or

malfunction of a Nexperia product can reasonably be expected

to result in personal injury, death or severe property or environmental

damage. Nexperia accepts no liability for inclusion and/or use of

Nexperia products in such equipment or applications and

therefore such inclusion and/or use is at the customer’s own risk.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no

representation or warranty that such applications will be suitable for the

speciﬁed use without further testing or modiﬁcation.

Limiting values — Stress above one or more limiting values (as deﬁned in

the Absolute Maximum Ratings System of IEC 60134) may cause permanent

damage to the device. Limiting values are stress ratings only and operation of

the device at these or any other conditions above those given in the

Characteristics sections of this document is not implied. Exposure to limiting

values for extended periods may affect device reliability.

Terms and conditions of sale — Nexperia products are sold

subject to the general terms and conditions of commercial sale, as published

at http://www.nexperia.com/proﬁle/terms, including those pertaining to warranty,

intellectual property rights infringement and limitation of liability, unless

explicitly otherwise agreed to in writing by Nexperia. In case of

any inconsistency or conﬂict between information in this document and such

terms and conditions, the latter will prevail.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

16.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks

are the property of their respective owners.

17. Contact information

For additional information, please visit: http://www.nexperia.com

For sales ofﬁce addresses, send an email to: salesaddresses@nexperia.com

Document status[1][2] Product status[3] Deﬁnition

Objective [short] data sheet Development This document contains data from the objective speciﬁcation for product development.

Preliminary [short] data sheet Qualiﬁcation This document contains data from the preliminary speciﬁcation.

Product [short] data sheet Production This document contains the product speciﬁcation.

Nexperia 74AHC1G09

2-input AND gate with open-drain output

18. Contents

1 General description. . . . . . . . . . . . . . . . . . . . . . 1

2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

3 Ordering information. . . . . . . . . . . . . . . . . . . . . 1

4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

5 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2

6 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2

6.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

6.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 2

7 Functional description . . . . . . . . . . . . . . . . . . . 2

8 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3

9 Recommended operating conditions. . . . . . . . 3

10 Static characteristics. . . . . . . . . . . . . . . . . . . . . 3

11 Dynamic characteristics . . . . . . . . . . . . . . . . . . 4

12 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

13 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6

14 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 8

15 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 8

16 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9

16.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9

16.2 Deﬁnitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

16.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

16.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

17 Contact information. . . . . . . . . . . . . . . . . . . . . . 9

18 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release:

18 December 2007