Newsletter Products Contact Applications Where to Buy English Tools myInfineon About Infineon Cart Discoveries Search Careers - Standard Global Shipping Home Products Evaluation Boards TLE5501 EVALKIT TLE5501 EVALKIT Overview TMR based angle sensor Parametrics Description: Documents The EvalKit consists of: Order an Infineon XMC1100 BootKit (microcontroller) Tools & Software the TLE5501_EVAL_SHIELD which can be plugged onto the BootKit Support a "magnetic knob" that can be mounted on top of the shield The TLE5501 Angle Shield has to be plugged onto the BootKit. Care has to be taken that the pins are correctly aligned. The TLE5501 sensor is soldered on the shield in a "breakout" area that can be easily broken of the shield and used in another application if needed. The shield has mounting holes for a magnetic knob that can be used to demonstrate the functionality of the sensor. The shield has also a voltage buffer available on board, and the output of the sensor can be optionally buffered by selecting the correct DIP switch settings. Designers who used this product also designed with Parametrics Parametrics TLE5501 EVALKIT Applications Automotive ; Automotive ASIL Configuration TLE5501 Family Angle Sensor Product Description The EvalKit consists of an Infineon XMC1100 BootKit (microcontroller), the TLE5501 angle shield which can be plugged onto the BootKit and of a "magnetic knob" that can be mounted on top of the shield Target Application Automotive / Automotive ASIL Documents + Expand all + Getting Started + Product Selection Guide Order Sales Product Name TLE5501 EVALKIT OPN TLE5501EVALKITTOBO1 Product Status active and preferred Package name -- Order online Completely lead free Halogen free RoHS compliant no Packing Size 1 Packing Type CONTAINER Moisture Level Moisture Packing NON DRY Tools & Software + Software Support - Find an answer to your question Please state your question (with at least 3 words) FAQ 1. Is the PGSISI kit recommended for angle sensors? [CN] 2. TLE5012B: Where is the active sensor area located in the package? [CN] 3. Does the sensors (TLE5012B /TLE5014) need an external clock signal ? Could a crystal oscillator be [CN] 4. Which SIL level does TLE5012B have? [CN] 5. What is the maximum readable RPM for the TLE5012B? [CN] 6. Is it possible to order TLE5012B E1000 factory configured in 10bit mode, (IFAB_RES bit 4:3 set to 1 [CN] + Submit a request to the Technical Assistance Center + Ask our community for support Follow us (c) 1999 - 2019 Infineon Technologies AG Usage of this website is subject to our Usage Terms Imprint Contact Privacy Policy Glossary