Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
A±0.2
W
( ) Reference size
L
0D±0.5
H
B±0.2
(I)
K
(P) (I)
+
–
0.3 max.
Pressure Relief
1800
TPE
Capacitance (µF)
Rated voltage code
Series identification
Lot number
Negative polarity
marking (–)
Frequency correction factor for ripple current
● High ripple current (2 to 5 times as high as TK series)
● Low ESR (40 to 70 % lower than TK series)
● Large capacitance (Up to 80 % larger than TK series)
● Endurance : 3000 to 4000 h at 125 °C
● Vibration-proof product is available upon request
● RoHS directive compliant
Features
Speci cations
DimensionsMarking
(Unit : mm)
Category temperature range
–55 °C to +125 °C
Rated voltage range 25 V.DC to 80 V.DC
Capacitance range 390 µF to 3300 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage cur rent l < 0.01 CV (A) after 2 minutes
Dissipation factor (tan d)
Please see the attached characteristics list
Characteristics
at low temperature
V.DC 25 35 to 80
(Impedance ratio at 120 Hz)Z(–25 °C)/Z(+20 °C) 2 2
Z(–40 °C)/Z(+20 °C) 4 3
Endurance
After applying rated working voltage for 4000 hours at +125 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits. (J16, K16 size : 3000 h)
Capacitance change Within ±30 % of the initial value (35 V.DC or less : Within ±35 %)
tan d< 300 % of the initial limit
DC leakage current Within the initial limit
Shelf life After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance.(With voltage treatment)
Resistance to
soldering heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan dWithin the initial limit
DC leakage current Within the initial limit
AEC-Q200 AEC-Q200 compliant
Example : 25 V.DC 1800 µF
Marking color : BLACK
Surface Mount Type
Series : Medium-size TP Type : V
High temperature
Lead-Free re ow
Frequency (Hz) 120 1 k 10 k 100 k to
Correction factor 0.75 0.90 0.95 1.00
R. Voltage
(V.DC) 25 35 50 63 70 80
Code E V H J 70 K
Size
codev 0D L A, B H I W P K
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.30
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.30
K21 18.0 21.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.30
· The dimensions of the vibration-proof products, please refer to the page of
the mounting specifi cation.
Nov. 201700