Mini-Circuits - Specification for Frequency Mixer - SYM-ED7059/1 Frequency Mixers print this page LO Power Level 10 dBm Pin Configuration Port LO RF IF Gnd Ext. Case Gnd Not Used x 2 1 3 4,5,6 - - Outline Drawing Notes: * Non-catalog model. Please consult factory for price and delivery. * For Surface Mount Environmental Specifications, please click here. * Case Style - TTT167 (inch,mm ) weight: 0.8 grams. A B C .375 .500 .23 9.525 12.700 5.842 K .050 1.270 L M D E F G H .020 .075 .250 .425 .187 0.508 1.905 6.350 10.795 4.750 N P Q R S J .050 1.270 General Quality Control Procedures and Environmental Specifications are given in MiniCircuits Guarantees Quality. Hi-Rel, MIL description are given in Hi-Rel and MIL SYM-ED7059/1 * Prices and Specifications subjects to change without notice. T .070 .270 .540 .060 .095 .445 .208 .415 1.778 6.858 13.716 1.524 2.413 11.303 5.283 10.541 Tolerance: .x .1 .xx .03 .xxx .015 inch. Material and Finish: Case material: plastic or copper-nickel alloy, Glass Epoxy Laminate or ceramic base. Termination finish: tin-lead plate or tin plate. Packaging: Electrical Specifications SYM-ED7059/1 Frequency MHz LO/RF IF LO Power Level 10 dBm Conversion Loss dB LO-RF LO-IF Isolation dB Isolation dB Mid-Band Total Range L M U L M 5.00-1800 5-800 L=low range(fL to 10fL) M=mid range(10fL to fU/2) U=upper range(fU/2 to fU) http://www.minicircuits.com/cgi-bin/spec?cat=mixer&model=SYM-ED7059/1&pix=ttt167.gif&bv=4 (1 of 2) [7/9/2004 4:05:27 PM] U Mini-Circuits - Specification for Frequency Mixer - SYM-ED7059/1 Packaging information: Tape Width(mm): 24 Reel Size(inches): 13 Device Cavity Pitch(mm): 12 Devices Per Reel: 500 Back http://www.minicircuits.com/cgi-bin/spec?cat=mixer&model=SYM-ED7059/1&pix=ttt167.gif&bv=4 (2 of 2) [7/9/2004 4:05:27 PM] i2 Technologies US, Inc. 15445 Innovation Drive San Diego, CA 92128 i2 Technologies US, Inc. HTML Pages converted to PDF Document This document contain component information from the manufacturer's website which are not available in a revision controlled document from the manufacturer. To facilitate the addition of these parts into the Electronics Database, we are converting the HTML pages related to that part, from the manufacturer's website into Adobe PDF format. The contents of this document is based on the information provided on the manufacturer's website, therefore the information may have been changed by the manufacturer since this was created. Powering the Bottom Line (R)