eee ucTOR 1N5225 thru 1N5267 a Zener Diodes ae Zener Voltage Range: 3.0 to 75V - Power Dissipation: 500mW DO-204AH (DO-35 Glass) Features Silicon Planar Power Zener Diodes. Standard Zener voltage tolerance is +5% with a B suffix. Other tolerances are available upon request. | | AY These diodes are also available in MiniMELF case with the type designation ZMM5225 ... ZMM5267, 2079 (2 SOT-23 case with the type designation MMBZ5265 mer 079 (2.0) ... MMBZ5267 and SOD-23 case with the types designation MMSZ5225 ... MMSZ5267 | min. 1.083 (27.5) max. .150 (3.8) \ | | ~Gahode Mechanical Data t | Case: DO-35 Glass Case \ Weight: approx. 0.13g AL Packaging codes/options: D7/10K per 13 reel, (52mm tape), 20K/box D8/10K per A t 52mm t , 20K/bo: max. 2.020 (0.52) per Ammo tape (52mm tape) x min. 1.083 (27.5) Dimensions in inches and (millimeters) Maximum Ratings and Thermal Characteristics 14 = 25c uniess otherwise noted) Parameter Symbol Value Unit Zener Current (see Table Characteristics) Power Dissipation at Tamb = 75C Prot 500") mw Thermal Resistance Junction to Ambient Air Resa 300 C/W Maximum Junction Temperature Tj 175 C Storage Temperature Range Ts . 65 to +175 C Notes: (1) Valid provided that leads at a distance of 10mm from case are kept at ambient temperature. 7/6/00 33GENERAL E> SmcONDUCTOR' 1N5225 thru 1N5267 Zener Diodes Electrical Characteristics (Ta = 25C unless otherwise noted) Maximum VF = 1.1V at le = 200mA Maximum Reverse Maximum Zener Impedance) Typical Leakage Current Nominal Zener Temperature Voltage Test Current atlzx=0.25mA | Coefficient Test Voltage) Maximum Regulator Type at Izr Vz (V) izt (mA) at Izt Zzt (Q) ZK (2) wz (% / C) In (uA) Va (V) Current Iz (mA) 1N5225 3.0 20 29 1600 0.075 50 1.0 152 1N5226 3.3 20 28 1600 0.070 25 1.0 138 1N5227 3.6 20 24 1700 0.065 15 1.0 126 1N5228 3.9 20 23 1900 -0.060 10 1.0 115 1N5229 43 20 22 2000 0.055 5.0 1.0 106 1N5230 47 20 19 1900 +0.030 5.0 2.0 97 1N5231 5.4 20 17 1600 +0.030 5.0 2.0 89 1N5232 5.6 20 11 1600 +0.038 5.0 3.0 81 1N5233 6.0 20 7 1600 +0.038 5.0 3.5 76 1N5234 6.2 20 7 1000 +0.045 5.0 4.0 73 1N5235 6.8 20 5 750 +0.050 3.0 5.0 67 1N5236 75 20 6 500 +0.058 3.0 6.0 61 1N5237 8.2 20 3 500 +0.062 3.0 6.5 55 1N5238 8.7 20 8 600 +0.065 3.0 6.5 52 1N5239 9.1 20 10 600 +0.068 3.0 7.0 50 1N5240 10 20 17 600 +0.075 3.0 8.0 45 1N5241 11 20 22 600 +0.076 2.0 8.4 41 1N5242 12 20 30 600 +0.077 1.0 9.1 38 1N5243 13 9.5 13 600 +0.079 0.5 9.9 35 1N5244 14 3.0 15 600 +0.082 0.1 10 32 1N5245 15 8.5 16 600 +0.082 0.1 11 30 1N5246 16 7.8 17 600 +0.083 0.1 12 28 1N5247 17 7.4 19 600 +0.084 0.1 13 27 1N5248 18 7.0 2t 600 +0.085 0.1 14 25 1N5243 19 6.6 23 600 +0.086 0.1 14 24 1N5250 20 6.2 25 600 +0.086 0.1 15 23 1N5251 22 5.6 29 600 +0.087 0.1 17 21 1N5252 24 .2 33 600 +0.087 0.1 18 19.1 1N5253 25 5.0 35 600 +0.089 0.1 19 18.2 1N5254 27 46 41 600 +0.090 0.1 21 16.8 1N5255 28 45 44 600 +0.091 0.1 21 16.2 1N5256 30 42 49 600 +0.091 0.1 23 15.1 1N5257 33 3.8 58 700 +0.092 0.1 25 13.8 1N5258 36 3.4 70 700 +0.093 0.1 27 12.6 1N5259 39 3.2 80 800 +0.094 0.1 30 11.6 1N5260 43 3.0 93 900 +0.095 0.1 33 10.6 1N5261 47 27 105 1000 +0.095 041 36 9.7 1N5262 51 25 125 1100 +0.096 0.1 39 8.9 1N5263 56 2.2 150 1300 +0.096 0.1 43 - 1N5264 60 2.1 170 1400 +0.097 0.1 46 - 1N5265 62 2.0 185 1400 +0.097 0.1 47 _ 1N5266 68 1.8 230 1600 +0.097 0.1 52 _ 1N5267 75 17 270 1700 +0.098 0.1 56 - Notes: (1) The Zener impedance is derived from the 1 kHz AC voltage which results when an AC current having an AMS value equal to 10% of the Zener current ({zT or l2k) is superimposed on IZT or IzK. Zener impedance is measured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units (2) Valid provided that leads at a distance of 10 mm from case are kept at ambient temperature (3) Measured with device junction in thermal equilibrium 34{). GENERAL ; 2 o) SEMICONDUCTOR Ratings and Characteristic Curves cr - 25c untess otherwise noted) Admissible power dissipation versus ambient temperature Valid provided that leads at a distance of 10 mm from case are kept at ambient temperature 0 100 200C 35 1N5225 thru 1N5267 Zener Diodes Zener Diodes Pulse thermal resistance versus pulse duration Valid provided that leads at a distance of 4 mm from case are kept at ambient temperature C/W 1 10 10 10 107 107 1 108 _+1,