SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N : CL10X475KA8NQNC Product : Multi-layer Ceramic Capacitor Description : CAP, 4.7, 25V, 10%, X6S, 0603 A. Samsung Part Number Series CL 10 X 475 K A 8 N Q N C Samsung Multi-layer Ceramic Capacitor Size 0603 (inch code) Dielectric X6S Capacitance Capacitance L: 1.6 0.15 0.8 0.15 mm W: Inner electrode Ni Termination Cu Plating Sn 100% 4.7 10 % tolerance mm (Pb Free) Product Size tolerance(0.15 mm) Rated Voltage 25 V Special Reserved for future use Thickness 0.8 0.15 mm Packaging Cardboard Type, 7" reel B. Samsung Reliablility Test and Judgement condition Performance 1.00.2Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 500Mohm Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (10) 250% of the rated voltage Voltage mechanical breakdown Temperature X6S Characterisitcs Adhesive Strength (From -55 to 105, Capacitance change shoud be within 22%) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 110% Capacitance 0.1 max. within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface 1) Sn63Pb37 solder is to be soldered newly 2355, 50.5sec. 2) SnAg3.0Cu0.5 solder 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Performance Vibration Test Moisture Resistance Capacitance change : within 10% Test condition Amplitude : 1.5mm Tan , IR : initial spec. From 10 to 55 (return : 1min.) Capacitance change : 2hours 3 direction (x, y, z) With rated voltage within 12.5% Tan : 0.125 max IR : High Temperature Capacitance change : Resistance Tan : 0.125 max IR : 402, 90~95%RH, 500+12/-0hrs 12.5* or Over within 12.5% With 150% of the rated voltage Max. operating temperature 25* or Over 1000+48/-0hrs Temperature Capacitance change : Cycling Tan , IR : initial spec. within 15% 1 cycle condition Min. operating temperature 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.