ADVANCED LINEAR DEVICES, INC. ALD1107/ALD1117 QUAD/DUAL P-CHANNEL MATCHED PAIR MOSFET ARRAY GENERAL DESCRIPTION The ALD1107/ALD1117 are monolithic quad/dual P-channel enhancement mode matched MOSFET transistor arrays intended for a broad range of precision analog applications. The ALD1107/ALD1117 offer high input impedance and negative current temperature coefficient. The transistor pairs are matched for minimum offset voltage and differential thermal response, and they are designed for precision analog switching and amplifying applications in +2V to +12V systems where low input bias current, low input capacitance and fast switching speed are desired. These MOSFET devices feature very large (almost infinite) current gain in a low frequency, or near DC, operating environment. The ALD1107/ALD1117 are building blocks for differential amplifier input stages, transmission gates, and multiplexer applications, current sources and many precision analog circuits. FEATURES * Low threshold voltage of -0.7V * Low input capacitance * Low Vos 2mV typical * High input impedance -- 1014 typical * Negative current (IDS) temperature coefficient * Enhancement-mode (normally off) * DC current gain 109 * Low input and output leakage currents * RoHS compliant * * * * * * * * Precision current mirrors Precision current sources Voltage choppers Differential amplifier input stage Voltage comparator Data converters Sample and Hold Analog signal processing PIN CONFIGURATION ALD1117 DP1 1 8 DP2 GP1 2 7 GP2 SP1 3 6 SP2 V- 4 5 V+ TOP VIEW SAL, PAL, DA PACKAGES ALD1107 ORDERING INFORMATION ("L" suffix denotes lead-free (RoHS)) Operating Temperature Range* 0C to +70C -55C to +125C 0C to +70C APPLICATIONS 8-Pin SOIC Package 8-Pin Plastic Dip Package 8-Pin CERDIP Package ALD1117SAL ALD1117PAL ALD1117DA 14-Pin SOIC Package 14-Pin Plastic Dip Package 14-Pin CERDIP Package ALD1107SBL ALD1107PBL ALD1107DB DP1 1 14 DP2 GP1 2 13 GP2 SP1 3 12 SP2 V- 4 11 V+ DP4 5 10 DP3 GP4 6 9 GP3 SP4 7 8 SP3 TOP VIEW SBL, PBL, DB PACKAGES * Contact factory for leaded (non-RoHS) or high temperature versions. BLOCK DIAGRAM BLOCK DIAGRAM ALD1107 ALD1117 V- (4) DP2 (14) DP1 (1) GP2 (13) GP1 (2) SP1 (3) V+ (11) SP2 (12) ~ V - (4) DP4 (5) DP3 (10) GP3 (9) DP1 (1) GP4 (6) SP3 (8) V+ (11) SP4 (7) ~ DP2 (8) GP1 (2) GP2 (7) SP1 (3) V+ (5) SP2 (6) Rev 2.0 (c)2012 Advanced Linear Devices, Inc. 415 Tasman Drive, Sunnyvale, CA 94089-1706 Tel: (408) 747-1155 Fax: (408) 747-1286 www.aldinc.com ABSOLUTE MAXIMUM RATINGS Drain-source voltage, VDS Gate-source voltage, VGS Power dissipation Operating temperature range SAL, PAL, SBL, PBL packages DA, DB packages Storage temperature range Lead temperature, 10 seconds CAUTION: ESD Sensitive Device. Use static control procedures in ESD controlled environment. -10.6V -10.6V 500mW 0C to +70C -55C to +125C -65C to +150C +260C OPERATING ELECTRICAL CHARACTERISTICS TA = 25C unless otherwise specified ALD1107 Parameter Symbol Gate Threshold Voltage VT Offset Voltage VGS1-VGS2 VOS Gate Threshold Temperature Drift 2 On Drain Current Transconductance Min -0.4 TCVT ALD1117 Test Typ Max Min Typ -0.7 -1.0 -0.4 -0.7 -1.0 2 10 2 10 -1.3 Max -1.3 IDS (ON) -1.3 -2 -1.3 -2 GIS 0.25 0.67 0.25 0.67 Unit Conditions V IDS = -1.0A VGS = VDS mV IDS = -10A VGS = VDS mV/C mA VGS = VDS = -5V mmho VDS = -5V IDS = -10mA Mismatch Gfs 0.5 0.5 % Output Conductance GOS 40 40 mho VDS = -5V IDS = -10mA VDS = -0.1V VGS = -5V % VDS = -0.1V VGS = -5V V IDS = -1.0A VGS = 0V Drain Source On Resistance RDS (ON) Drain Source On Resistance Mismatch RDS (ON) Drain Source Breakdown Voltage BVDSS 1200 1800 1200 0.5 1800 0.5 -12 -12 Off Drain Current 1 IDS (OFF) 10 400 4 10 400 4 pA nA VDS = -12V VGS = 0V TA = 125C Gate Leakage Current IGSS 0.1 10 1 0.1 10 1 pA nA VDS = 0V VGS = -12V TA = 125C Input Capacitance 2 CISS 1 3 1 3 pF Notes: 1 2 Consists of junction leakage currents Sample tested parameters ALD1107/ALD1117 Advanced Linear Devices 2 of 11 TYPICAL PERFORMANCE CHARACTERISITCS LOW VOLTAGE OUTPUT CHARACTERISTICS OUTPUT CHARACTERISTICS VGS = -12V VBS = 0V TA = 25C -7.5 DRAIN SOURCE CURRENT (A) DRAIN SOURCE CURRENT (mA) 500 -10 -10V -8V -5.0 -6V -2.5 -4V VGS = -12V VBS = 0V TA = 25C 250 -6V -4V -2V 0 -250 -2V -500 0 0 -2 -4 -6 -8 -10 -12 -320 -160 DRAIN SOURCE VOLTAGE (V) DRAIN SOURCE VOLTAGE (mV) TRANSFER CHARACTERISTIC WITH SUBSTRATE BIAS -20 1.0 IDS = -5mA VBS = 0V f = 1KHz 0.5 0.2 0.1 TA = +125C TA = +25C 0.05 VBS = 0V DRAIN SOURCE CURRENT (A) FORWARD TRANSCONDUCTANCE (mmho) FORWARD TRANSCONDUCTANCE vs. DRAIN SOURCE VOLTAGE IDS = -1mA 0.02 4V 6V 8V 10V 12V 2V -15 -10 -5 VGS = VDS TA = 25C 0 0.01 0 -2 -4 -6 -8 -10 0 -12 -0.8 DRAIN SOURCE ON RESISTANCE RDS (ON) vs. GATE SOURCE VOLTAGE -2.4 -3.2 -4.0 OFF DRAIN CURRENT vs. AMBIENT TEMPERATURE OFF DRAIN SOURCE CURRENT (pA) 100 VDS = 0.4V VBS = 0V 10 -1.6 GATE SOURCE VOLTAGE (V) DRAIN SOURCE VOLTAGE (V) DRAIN SOURCE ON RESISTANCE (K) 320 160 0 TA = +125C 1 TA = +25C 1000 VDS = -12V VGS = VBS = 0V 100 10 1 0.1 0 -2 -4 -6 -8 -10 -12 -25 0 +25 +50 +75 +100 +125 AMBIENT TEMPERATURE (C) GATE SOURCE VOLTAGE (V) ALD1107/ALD1117 -50 Advanced Linear Devices 3 of 11 TYPICAL APPLICATIONS CURRENT SOURCE MIRROR CURRENT SOURCE WITH GATE CONTROL V+ = +5V V+ = +5V 1/2 ALD1107 or ALD1117 1/2 ALD1107 or ALD1117 V+ = +5V Q3 ISET Q4 Q3 Q4 RSET ISET I SOURCE Q1 Digital Logic Control of Current Source ON Q2 I SOURCE = ISET = V+ -Vt RSET ~ = 4 RSET 1/2 ALD1106 or ALD1116 Q1, Q2: N - Channel MOSFET Q3, Q4: P - Channel MOSFET CURRENT SOURCE MULTIPLICATION V+ = +5V PMOS PAIR ISET Q1 Q2 NMOS PAIR 1/2 ALD1106 or ALD1116 ISOURCE = ISET x N Q1 QSET Q2 Q3 QN VIN- Current Source Q1, Q2: N - Channel MOSFET Q3, Q4: P - Channel MOSFET ALD1107/ALD1117 RSET Q4 VOUT VIN+ 1/4 ALD1106 or 1/2 ALD1116 Q1 : N - Channel MOSFET Q3,Q4 : P - Channel MOSFET 1/2 ALD1107 or ALD1117 Q3 Q1 OFF DIFFERENTIAL AMPLIFIER V+ ISOURCE RSET QSET, Q1..QN: ALD1106 or ALD1116 N - Channel MOSFET Advanced Linear Devices 4 of 11 TYPICAL APPLICATIONS (cont.) BASIC CURRENT SOURCES P- CHANNEL CURRENT SOURCE N- CHANNEL CURRENT SOURCE V+ = +5V V+ = +5V 1/2 ALD1107 or ALD1117 RSET ISET ISOURCE 8 Q2 8 3 5 6 Q1 2 7 3 2 Q4 5 1 I SOURCE ISET 1/2 ALD1106 or ALD1116 ISOURCE = ISET = 7 6 Q3 V+ - Vt RSET ~ V+ - 1.0 = ~ = RSET RSET 4 RSET Q3, Q4: P - Channel MOSFET Q1, Q2 : N - Channel MOSFET CASCODE CURRENT SOURCES V+ = +5V V+ = +5V ALD1107 ISET RSET ISOURCE Q4 Q1 Q2 Q3 Q4 Q3 Q2 Q1 ISET ISOURCE RSET ALD1106 ISOURCE = ISET = ~ = 3 RSET Q1, Q2, Q3, Q4: P - Channel MOSFET (ALD1102 or ALD1103) Q1, Q2, Q3, Q4: N - Channel MOSFET (ALD1101 or ALD1103) ALD1107/ALD1117 V+ - 2Vt RSET Advanced Linear Devices 5 of 11 SOIC-8 PACKAGE DRAWING 8 Pin Plastic SOIC Package E Millimeters Dim S (45) D A Min 1.35 Max 1.75 Min 0.053 Max 0.069 A1 0.10 0.25 0.004 0.010 b 0.35 0.45 0.014 0.018 C 0.18 0.25 0.007 0.010 D-8 4.69 5.00 0.185 0.196 E 3.50 4.05 0.140 0.160 1.27 BSC e A A1 e Inches 0.050 BSC H 5.70 6.30 0.224 0.248 L 0.60 0.937 0.024 0.037 o 0 8 0 8 S 0.25 0.50 0.010 0.020 b S (45) H L ALD1107/ALD1117 C o Advanced Linear Devices 6 of 11 PDIP-8 PACKAGE DRAWING 8 Pin Plastic DIP Package Millimeters E E1 D S A2 A1 e b A L Dim Min Max Min Max A 3.81 5.08 0.105 0.200 A1 0.38 1.27 0.015 0.050 A2 1.27 2.03 0.050 0.080 b 0.89 1.65 0.035 0.065 b1 0.38 0.51 0.015 0.020 c 0.20 0.30 0.008 0.012 D-8 9.40 11.68 0.370 0.460 E 5.59 7.11 0.220 0.280 E1 7.62 8.26 0.300 0.325 e 2.29 2.79 0.090 0.110 e1 7.37 7.87 0.290 0.310 L 2.79 3.81 0.110 0.150 S-8 1.02 2.03 0.040 0.080 0 15 0 15 o b1 Inches c e1 ALD1107/ALD1117 o Advanced Linear Devices 7 of 11 CERDIP-8 PACKAGE DRAWING 8 Pin CERDIP Package E E1 Millimeters D A1 s A L L2 b b1 e L1 Min Inches Dim A 3.55 Max 5.08 Min 0.140 Max 0.200 A1 1.27 2.16 0.050 0.085 b 0.97 1.65 0.038 0.065 b1 0.36 0.58 0.014 0.023 C 0.20 0.38 0.008 0.015 D-8 -- 10.29 -- 0.405 E 5.59 7.87 0.220 0.310 E1 7.73 8.26 0.290 0.325 e 2.54 BSC 0.100 BSC e1 7.62 BSC 0.300 BSC L 3.81 5.08 0.150 0.200 L1 3.18 -- 0.125 -- L2 0.38 1.78 0.015 0.070 S -- 2.49 -- 0.098 O 0 15 0 15 C e1 ALD1107/ALD1117 o Advanced Linear Devices 8 of 11 SOIC-14 PACKAGE DRAWING 14 Pin Plastic SOIC Package Millimeters E S (45) Dim A Min 1.35 Max 1.75 Min 0.053 Max 0.069 A1 0.10 0.25 0.004 0.010 b 0.35 0.45 0.014 0.018 C 0.18 0.25 0.007 0.010 D-14 8.55 8.75 0.336 0.345 E 3.50 4.05 0.140 0.160 1.27 BSC e D A Inches 0.050 BSC H 5.70 6.30 0.224 0.248 L 0.60 0.937 0.024 0.037 o 0 8 0 8 S 0.25 0.50 0.010 0.020 A1 e b S (45) H L ALD1107/ALD1117 C o Advanced Linear Devices 9 of 11 PDIP-14 PACKAGE DRAWING 14 Pin Plastic DIP Package Millimeters E E1 D S A2 A1 A L Inches Dim A Min Max Min 3.81 5.08 0.105 Max 0.200 A1 0.38 1.27 0.015 0.050 A2 1.27 2.03 0.050 0.080 b 0.89 1.65 0.035 0.065 b1 0.38 0.51 0.015 0.020 c 0.20 0.30 0.008 0.012 D-14 17.27 19.30 0.680 0.760 E 5.59 7.11 0.220 0.280 E1 7.62 8.26 0.300 0.325 e 2.29 2.79 0.090 0.110 e1 7.37 7.87 0.290 0.310 L 2.79 3.81 0.110 0.150 S-14 1.02 2.03 0.040 0.080 o 0 15 0 15 e b b1 c e1 ALD1107/ALD1117 o Advanced Linear Devices 10 of 11 CERDIP-14 PACKAGE DRAWING 14 Pin CERDIP Package Millimeters E E1 D A1 s A L L1 L2 b b1 e Inches Dim A Min Max Min Max 3.55 5.08 0.140 0.200 A1 1.27 2.16 0.050 0.085 b 0.97 1.65 0.038 0.065 b1 0.36 0.58 0.014 0.023 C 0.20 0.38 0.008 0.015 D-14 -- 19.94 -- 0.785 E 5.59 7.87 0.220 0.310 E1 7.73 8.26 0.290 0.325 e 2.54 BSC 0.100 BSC e1 7.62 BSC 0.300 BSC L 3.81 5.08 0.150 0.200 L1 3.18 -- 0.125 -- L2 0.38 1.78 0.015 0.070 S -- 2.49 -- 0.098 O 0 15 0 15 C e1 ALD1107/ALD1117 o Advanced Linear Devices 11 of 11