GATE CONTROLLED DEVICE - Gate Turn Off Thyristors - Capsule Type
VDRM VGK
= -
2V VRRM VRGM IT(AV)
TSINK = 55oC
IT(RMS)
TSINK = 25oCITSM(1)
10ms ITSM(2)
2ms I2tV
TM
IT = ITGQM
IGT @
25oC
VGT @
25oC
(Typ)
ton
(min) toff
(min) Rth j-hs Wt Mounting
Force
(V) (V) (V) (A) (µµF) (A) (A) (kA) (kA) (kA2s) (V) (A) (V) (µµs) (A) (µµs) (A/µµs) (µµs) (µµs) (K/W) (g) (kN)
Notes 1&2 Note 2 Note 2 Note 3 Note 3 Note 4 Note 4 Note 4 Note 5 Note 7 Note 8
WG5025Rx *S0500KC250 1200-2500 100-2000 18 500 1 330 640 4 7.2 80 x 1032.5 1.0 0.8 0.4 10 10 20 20.0 90.0 0.065 120 45-90
WG6018Rx *S0600KC180 600-1800 100-1400 18 600 1.5 430 870 5 9 130 x 1032.1 1.0 0.8 0.4 12 10 20 20.0 70.0 0.063 120 45-90
WG9014Rx *S0900KC140 600-1400 100-1100 18 900 3 445 890 5.5 9.8 150 x 1032.3 1.0 0.8 0.4 15 12 20 20.0 75.0 0.063 120 45-90
WG5025FRx *H0500KC250 1200-2500 100-2000 18 500 1 280 540 3 5.4 45 x 1033.2 1.5 0.8 0.8 30 5 40 10.0 60.0 0.065 120 45-90
WG6018FRx *H0600KC180 600-1800 100-1400 18 600 1.5 360 700 4 7.2 80 x 1032.6 1.5 0.8 0.8 30 5 40 20.0 45.0 0.063 120 45-90
WG9014FRx *H0900KC140 600-1400 100-1100 18 900 3 370 730 4.5 8.1 100 x 1033.0 1.5 0.8 0.8 40 6 40 10.0 50.0 0.063 120 45-90
WG10025SN YG1000LC250 2500 1800 18 1000 2 500 970 5 8.9 125 x 1032.5 1.0 1.0 2.0 20 16 25 2.0 16.0 0.080 170 10-12 101A288
WG10045SN YG1000NC450 4500 1800 18 1000 2 380 750 8 14 80 x 1034.0 1.0 1.2 2.0 20 16 25 2.0 16.0 0.080 480 15-25 Fig. 3
WG20025SN YG2000LC250 2500 1800 18 2000 4 1020 2040 16 24 1.28 x 1062.8 2.5 1.0 5.0 30 24 30 5.0 24.0 0.027 800 17-24
WG20045SN YG2000NC450 4500 1800 18 2000 4 870 1730 13 22 0.85 x 1063.5 2.5 1.0 8.0 30 25 30 8.0 25.0 0.027 800 17-24
WG30025SN YG3000ZC250 2500 1800 18 3000 5 1640 3270 30 40 4.50 x 1062.5 4.0 1.2 7.5 30 28 40 7.5 28.0 0.015 1500 36-44
WG30045SN YG3000ZC450 4500 1800 18 3000 6 1180 2360 24 32 2.88 x 1064.0 3.0 1.0 9.0 30 28 40 9.0 28.0 0.015 1300 36-44
WG30060SN YG3000ZC600 6000 1800 18 3000 3 1100 2300 24 32 2.88 x 1063.5 1.0 1.2 7.5 25 28 70 7.5 28.0 0.015 1500 36-44
WG40045SN YG4000EC450 4500 1800 18 4000 6 1270 2540 25 32 3.1 x 1064.4 4.0 1.2 7.5 50 28 40 7.5 28.0 0.015 1500 36-44
The information contained herein is confidential and is protected by Copyright. The information may not be used or disclosed except with the written permission of and in the manner permitted by the proprietors Westcode Semiconductors Limited. In the interest of product improvement, Westcode reserves the right to change specifications at any time without prior notice.
VDRM VGK
= -
2V VRRM VGK IT(AV)
TSINK = 55oC
IT(RMS)
TCASE = 25oCITSM(1)
10ms ITSM(2)
2ms I2tV
TM
IT = ITGQM
IGT @
25oC
VGT @
25oC
(Typ)
ton
(min) toff
(min) Rth j-hs Wt Mounting
Force
(V) (V) (V) (A) (µµF) (A) (A) (kA) (kA) (A2s) (V) (A) (V) (µµs) (A) (µµs) (A/µµs) (µµs) (µµs) (K/W) (g) (kN)
Note 1 Note 1 Note 2 Note 3 Note 3 Note 4 Note 4 Note 4 Note 5 Note 7 Note 8
WG5045S N/A N/A
WG8045S N/A N/A
WG8060S N/A N/A
WG7025S N/A N/A
WG10025S N/A N/A
WG40045S N/A N/A
The information contained herein is confidential and is protected by Copyright. The information may not be used or disclosed except with the written permission of and in the manner permitted by the proprietors Westcode Semiconductors Limited. In the interest of product improvement, Westcode reserves the right to change specifications at any time without prior notice.
Notes:
1
V
GK
-2V.
2
Not applicable to this table.
3Double side cooled, single phase; 50Hz, 180o sinewave.
4T
j(initial)
= 125oC, single phase, 180o sinewave, re-applied voltage V
D
= V
R
10V.
5
I
T
= 3000A repetitive, I
GM
= 30A, di
GM
/dt = 20A/
s, for higher di/dt please consult Westcode Sales Office.
6
With RCD snumber, R = 5 ohms and C is the value as for I
TGQM
7
Does not include snubber discharge time; refers only to minimum time for whole device to be in conduction with anode current di/dt > 10A/
s
8
Minimum time to re-fire the device. The gate drive circuit may require a longer period of low impedance option to ensure full extraction of the tail current
Note 6
tgq @ diGQ
/dt
IT = ITGQM
Old Part Number New Part Number
PDF Data
Sheet
Available
Data Sheet
Available
Outline No.
ITGQM @ C
s
Note 6 Note 6
* These products, and their derivatives now undergoing obsolescence - please contact Factory for alternatives.
Part Number
OBSOLETE New Part Number
(Not applicable)
ITGQM @ C
s
tgt @ IGM IT
= ITGQM
Outline No.
tgt @ IGM IT
= ITGQM
Note 6
tgq @ diGQ
/dt
IT = ITGQM
Not for new designs. Please refer to Factory for assistance.
101A296
Fig. 4
Fig. 5
Fig. 6