3 V, Parallel Input Micropower 10-/12-Bit DACs AD7392/AD7393 Micropower: 100 A 0.1 A typical power shutdown Single-supply 2.7 V to 5.5 V operation AD7392: 12-bit resolution AD7393: 10-bit resolution 0.9 LSB differential nonlinearity error APPLICATIONS Automotive 0.5 V to 4.5 V output span voltage Portable communications Digitally controlled calibration PC peripherals FUNCTIONAL BLOCK DIAGRAM AD7392 VDD 12-BIT DAC VREF VOUT SHDN 12 DAC REGISTER AGND 12 DGND CS D0 TO D11 RS 01121-001 FEATURES Figure 1. GENERAL DESCRIPTION The AD7392/AD7393 comprise a set of pin-compatible 10-/12-bit voltage output, digital-to-analog converters. The parts are designed to operate from a single 3 V supply. Built using a CBCMOS process, these monolithic DACs offer low cost and ease of use in single-supply 3 V systems. Operation is guaranteed over the supply voltage range of 2.7 V to 5.5 V, making this device ideal for battery-operated applications. The full-scale voltage output is determined by the external reference input voltage applied. The rail-to-rail REFIN to DACOUT allows a full-scale voltage equal to the positive supply VDD or any value in between. The voltage outputs are capable of sourcing 5 mA. Both parts are offered with similar pinouts, which allows users to select the amount of resolution appropriate for their applications without changing the circuit card. The AD7392/AD7393 are specified for operation over the extended industrial temperature range of -40C to +85C. The AD7393AR is specified for the automotive temperature range of -40C to +125C. The AD7392/AD7393 are available in 20-lead PDIP and 20-lead SOIC packages. For serial data input, 8-lead packaged versions, see the AD7390 and AD7391. A data latch load of 12 bits with a 45 ns write time eliminates wait states when interfacing to the fastest processors. Additionally, an asynchronous RS input sets the output to a zero scale at power-on or upon user demand. Rev. C Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c)1996-2007 Analog Devices, Inc. All rights reserved. AD7392/AD7393 TABLE OF CONTENTS Features .............................................................................................. 1 Digital-to-Analog Converters................................................... 12 Applications....................................................................................... 1 Amplifier Section ....................................................................... 12 Functional Block Diagram .............................................................. 1 Reference Input........................................................................... 12 General Description ......................................................................... 1 Power Supply............................................................................... 13 Revision History ............................................................................... 2 Input Logic Levels ...................................................................... 13 Specifications..................................................................................... 3 Digital Interface.......................................................................... 13 Electrical Characteristics............................................................. 3 Reset Pin (RS) ............................................................................. 14 Timing Diagram ........................................................................... 5 Power Shutdown (SHDN)......................................................... 14 Absolute Maximum Ratings............................................................ 6 Unipolar Output Operation...................................................... 14 ESD Caution.................................................................................. 6 Bipolar Output Operation......................................................... 15 Pin Configurations and Function Descriptions ........................... 7 Outline Dimensions ....................................................................... 16 Typical Performance Characteristics ............................................. 8 Ordering Guide .......................................................................... 17 Theory of Operation ...................................................................... 12 REVISION HISTORY 8/07--Rev. B to Rev. C Changes to Specifications Section.................................................. 3 Changes to Table 3............................................................................ 6 Changes to Theory of Operation Section.................................... 12 Changes to Figure 29...................................................................... 13 Changes to Figure 32...................................................................... 14 Changes to Figure 33...................................................................... 15 Updated Outline Dimensions ....................................................... 16 Changes to Ordering Guide .......................................................... 17 6/04--Changed from Rev. A to Rev. B Removed TSSOP.................................................................Universal Changes to Ordering Guide .......................................................... 17 3/99--Changed from Rev. 0 to Rev. A 11/96--Revision 0: Initial Version Rev. C | Page 2 of 20 AD7392/AD7393 SPECIFICATIONS ELECTRICAL CHARACTERISTICS At VREF = 2.5 V, -40C < TA < +85C, unless otherwise noted. Table 1. AD7392 Parameter STATIC PERFORMANCE Resolution1 Relative Accuracy2 Symbol Conditions 3 V 10% 5 V 10% Unit TA = +25C TA = -40C, +85C TA = +25C, monotonic Monotonic Data = 0x000, TA = +25C, +85C Data = 0x000, TA = -40C TA = +25C, +85C, data = 0xFFF TA = -40C, data = 0xFFF TCVFS 12 1.8 3 0.9 1 4.0 8.0 8 20 28 12 1.8 3 0.9 1 4.0 8.0 8 20 28 Bits LSB max LSB max LSB max LSB max mV max mV max mV max mV max ppm/C typ VREF RREF CREF 0/VDD 2.5 5 0/VDD 2.5 5 V min/max M typ4 pF typ 1 3 100 1 3 100 mA typ mA typ pF typ VIL VIH IIL CIL 0.5 VDD - 0.6 10 10 0.8 VDD - 0.6 10 10 V max V min A max pF max tCS tDS tDH tRS 45 30 20 40 45 15 5 30 ns min ns min ns min ns min Data = 0x000 to 0xFFF to 0x000 To 0.1% of full scale 0.05 70 Code 0x7FF to Code 0x800 to Code 0x7FF 65 15 -63 0.05 60 80 65 15 -63 V/s typ s typ s typ nV/s typ nV/s typ dB typ 2.7/5.5 55/100 0.1/1.5 300 0.006 2.7/5.5 55/100 0.1/1.5 500 0.006 V min/max A typ/max A typ/max W max %/% max N INL Differential Nonlinearity2 DNL Zero-Scale Error VZSE Full-Scale Voltage Error VFSE Full-Scale Temperature Coefficient3 REFERENCE INPUT VREF Range Input Resistance Input Capacitance3 ANALOG OUTPUT Current (Source) Output Current (Sink) Capacitive Load3 LOGIC INPUTS Logic Input Low Voltage Logic Input High Voltage Input Leakage Current Input Capacitance3 INTERFACE TIMING3, 5 Chip Select Write Width Data Setup Data Hold Reset Pulse Width AC CHARACTERISTICS Output Slew Rate Settling Time6 Shutdown Recovery Time DAC Glitch Digital Feedthrough Feedthrough SUPPLY CHARACTERISTICS Power Supply Range Positive Supply Current Shutdown Supply Current Power Dissipation Power Supply Sensitivity IOUT IOUT CL SR tS tSDR Data = 0x800, VOUT = 5 LSB Data = 0x800, VOUT = 5 LSB No oscillation VOUT/VREF VREF = 1.5 V dc + 1 V p-p, data = 0x000, f = 100 kHz VDD RANGE IDD IDD-SD PDISS PSS DNL < 1 LSB VIL = 0 V, no load SHDN = 0, VIL = 0 V, no load VIL = 0 V, no load VDD = 5% 1 One LSB = VREF/4096 V for the 12-bit AD7392. The first two codes (0x000, 0x001) are excluded from the linearity error measurement. 3 These parameters are guaranteed by design and not subject to production testing. 4 Typicals represent average readings measured at +25C. 5 All input control signals are specified with tR = tF = 2 ns (10% to 90% of 13 V) and timed from a voltage level of 1.6 V. 6 The settling time specification does not apply for negative going transitions within the last 3 LSBs of ground. 2 Rev. C | Page 3 of 20 AD7392/AD7393 At VREF = 2.5 V, -40C < TA < +85C, unless otherwise noted. Table 2. AD7393 Parameter STATIC PERFORMANCE Resolution1 Relative Accuracy2 Differential Nonlinearity2 Zero-Scale Error Full-Scale Voltage Error Full-Scale Temperature Coefficient3 REFERENCE INPUT VREF IN Range Input Resistance Input Capacitance3 ANALOG OUTPUT Output Current (Source) Output Current (Sink) Capacitive Load3 LOGIC INPUTS Logic Input Low Voltage Logic Input High Voltage Input Leakage Current Input Capacitance3 INTERFACE TIMING3, 5 Chip Select Write Width Data Setup Data Hold Reset Pulse Width AC CHARACTERISTICS Output Slew Rate Settling Time6 Shutdown Recovery Time DAC Glitch Digital Feedthrough Feedthrough SUPPLY CHARACTERISTICS Power Supply Range Positive Supply Current Shutdown Supply Current Power Dissipation Power Supply Sensitivity Symbol Conditions 3 V 10% 5 V 10% Unit TA = +25C TA = -40C, +85C, +125C Monotonic Data = 0x000 TA = +25C, +85C, +125C, data = 0x3FF TA = -40C, data = 0x3FF TCVFS 10 1.75 2.0 0.8 9.0 32 42 28 10 1.75 2.0 0.8 9.0 32 42 28 Bits LSB max LSB max LSB max mV max mV max mV max ppm/C typ VREF RREF CREF 0/VDD 2.5 5 0/VDD 2.5 5 V min/max M typ4 pF typ 1 3 100 1 3 100 mA typ mA typ pF typ VIL VIH IIL CIL 0.5 VDD - 0.6 10 10 0.8 VDD - 0.6 10 10 V max V min A max pF max tCS tDS tDH tRS 45 30 20 40 45 15 5 30 ns ns ns ns Data = 0x000 to 0x3FF to 0x000 To 0.1% of full scale 0.05 70 Code 0x7FF to Code 0x800 to Code 0x7FF 0.05 60 80 65 15 -63 V/s typ s typ s typ nV/s typ nV/s typ dB typ 2.7/5.5 55 100 0.1/1.5 500 0.006 V min/max A typ A max A typ/max W max %/% max N INL DNL VZSE VFSE IOUT IOUT CL SR tS tSDR Data = 0x200, VOUT = 5 LSB Data = 0x200, VOUT = 5 LSB No oscillation VOUT/VREF VREF = 1.5 V dc 11 V p-p, data = 0x000, f = 100 kHz 65 15 -63 VDD RANGE IDD DNL < 1 LSB VIL = 0 V, no load, TA = +25C VIL = 0 V, no load SHDN = 0, VIL = 0 V, no load VIL = 0 V, no load VDD = 5% 2.7/5.5 55 100 0.1/1.5 300 0.006 IDD-SD PDISS PSS 1 One LSB = VREF/1024 V for the 10-bit AD7393. The first two codes (0x000, 0x001) are excluded from the linearity error measurement. 3 These parameters are guaranteed by design and not subject to production testing. 4 Typicals represent average readings measured at +25C. 5 All input control signals are specified with tR = tF = 2 ns (10% to 90% of 13 V) and timed from a voltage level of 1.6 V. 6 The settling time specification does not apply for negative going transitions within the last 3 LSBs of ground. 2 Rev. C | Page 4 of 20 AD7392/AD7393 TIMING DIAGRAM 1 CS tCS 0 tDS tDH 1 D11 TO D0 DATA VALID 0 tRS 1 RS FS VOUT ZS 0.1%FS ERROR BAND tS Figure 2. Timing Diagram Rev. C | Page 5 of 20 tS 01121-004 0 AD7392/AD7393 ABSOLUTE MAXIMUM RATINGS Table 3. Parameter VDD to GND VREF to GND Logic Inputs to GND VOUT to GND IOUT Short Circuit to GND DGND to AGND Package Power Dissipation Thermal Resistance (JA) 20-Lead PDIP (N 20) 20-Lead SOIC (R-20) Maximum Junction Temperature (TJ max) Operating Temperature Range AD7393AR Storage Temperature Range Lead Temperature Reflow Soldering Peak Temperature SnPb Pb-Free Rating -0.3 V, +8 V -0.3 V, VDD -0.3 V, VDD + 0.3 V -0.3 V, VDD + 0.3 V 50 mA -0.3 V, +2 V (TJ max - TA)/JA Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ESD CAUTION 57C/W 60C/W 150C -40C to +85C -40C to +125C -65C to +150C 240C 260C Rev. C | Page 6 of 20 AD7392/AD7393 PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS VDD 1 20 VREF VDD 1 20 VREF SHDN 2 19 VOUT SHDN 2 19 VOUT CS 3 18 AGND CS 3 18 AGND RS 4 17 DGND RS 4 17 DGND NC 5 16 D11 D1 8 13 D6 D3 8 13 D8 D2 9 12 D5 D4 9 12 D7 D3 10 11 D4 D5 10 11 D6 AD7392 D9 TOP VIEW NC 6 (Not to Scale) 15 D8 D0 7 14 D7 01121-006 TOP VIEW D1 6 (Not to Scale) 15 D10 D2 7 14 D9 16 01121-007 D0 5 AD7393 NC = NO CONNECT Figure 3. AD7392 Pin Configuration Figure 4. AD7393 Pin Configuration Table 4. AD7392 Pin Function Descriptions Pin No. 1 2 Mnemonic VDD SHDN 3 4 5 to 16 17 18 19 20 CS RS D0 to D11 DGND AGND VOUT VREF Description Positive Power Supply Input. The specified range of operation is 2.7 V to 5.5 V. Power Shutdown Active Low Input. DAC register contents are saved as long as power stays on the VDD pin. When SHDN = 0, CS strobes write new data into the DAC register. Chip Select Latch Enable, Active Low. Asynchronous Active Low Input. Resets the DAC register to 0. Parallel Input Data Bits. D11 is the MSB; D0 is the LSB. Digital Ground. Analog Ground. DAC Voltage Output. DAC Reference Input. Establishes the DAC full-scale voltage. Table 5. AD7393 Pin Function Descriptions Pin No. 1 2 Mnemonic VDD SHDN 3 4 5, 6 7 to 16 17 18 19 20 CS RS NC D0 to D9 DGND AGND VOUT VREF Description Positive Power Supply Input. The specified range of operation is 2.7 V to 5.5 V. Power Shutdown Active Low Input. DAC register contents are saved as long as power stays on the VDD pin. When SHDN = 0, CS strobes write new data into the DAC register. Chip Select Latch Enable, Active Low. Asynchronous Active Low Input. Resets the DAC register to 0. No Connect. Parallel Input Data Bits. D9 is the MSB; D0 is the LSB. Digital Ground. Analog Ground. DAC Voltage Output. DAC Reference Input. Establishes the DAC full-scale voltage. Rev. C | Page 7 of 20 AD7392/AD7393 TYPICAL PERFORMANCE CHARACTERISTICS AD7392 80 0.4 70 0.2 60 FREQUENCY 0.6 0 -0.2 40 30 -0.6 20 -1.0 0 512 1024 1536 2048 2560 3072 3584 SS = 300 UNITS VDD = 2.7V VREF = 2.5V TA = 25C 50 -0.4 -0.8 AD7393 90 01121-008 INL (LSB) 0.8 100 VDD = 2.7V VREF = 2.5V TA = 25C 01121-011 1.0 10 0 4096 -10 -3.3 3.3 CODE (Decimal) Figure 5. AD7392 Integral Nonlinearity Error vs. Code 1.0 AD7393 0.8 16 23 30 36 43 50 Figure 8. AD7393 Total Unadjusted Error Histogram 30 VDD = 2.7V VREF = 2.5V TA = 25C AD7393 0.6 SS = 100 UNITS VDD = 2.7V VREF = 2.5V TA = -40C TO +85C 24 0.4 0.2 FREQUENCY INL (LSB) 10 TOTAL UNADJUSTED ERROR (LSB) 0 -0.2 18 12 -0.4 -0.6 -0.8 -1.0 0 128 256 384 512 640 768 896 01121-012 01121-009 6 0 1024 -66 CODE (Decimal) Figure 6. AD7393 Integral Nonlinearity Error vs. Code SS = 100 UNITS VDD = 2.7V VREF = 2.5V TA = 25C 5 5.8 -32 -26 6.6 7.3 8.1 8.9 -20 -12 -6 0 AD7392 VDD = 5V VREF = 2.5V TA = 25C 9.7 10.5 11.2 12.0 TOTAL UNADJUSTED ERROR (LSB) 12 10 8 6 4 2 0 01121-013 10 5.0 -40 14 15 0 -46 16 AD7392 01121-010 FREQUENCY 20 -52 Figure 9. AD7393 Full-Scale Output Temperature Coefficient Histogram OUTPUT VOLTAGE NOISE (V/ Hz) 25 -60 FULL-SCALE TEMPERATURE COEFFICIENT (ppm/C) 1 10 100 1k 10k FREQUENCY (Hz) Figure 7. AD7392 Total Unadjusted Error Histogram Figure 10. Voltage Noise Density vs. Frequency Rev. C | Page 8 of 20 100k AD7392/AD7393 100 1000 95 VDD = 3V TA = 25C VLOGIC FROM 0V TO 3V 85 80 75 VLOGIC FROM 3V TO 0V 70 VLOGIC = 0V TO VDD TO 0V VREF = 2.5V TA = 25C 800 SUPPLY CURRENT (A) 65 60 a 600 a. VDD = 5.5V, CODE = 0x155 b. VDD = 5.5V, CODE = 0x3FF c. VDD = 2.7V, CODE = 0x155 d. VDD = 2.7V, CODE = 0x355 400 01121-014 0.5 0 1.0 1.5 2.0 2.5 d 0 1k 3.0 10k VIN (V) 5.0 50 40 2.5 VLOGIC FROM HIGH TO LOW PSRR (dB) 3.0 VLOGIC FROM LOW TO HIGH 2.0 VDD = 3V 5% 30 20 1.5 1.0 1 2 3 4 5 6 01121-018 10 0.5 0 10 7 100 1k Figure 15. Power Supply Rejection Ratio vs. Frequency Figure 12. Logic Threshold vs. Supply Voltage 40 AD7392 VDD = 5V VREF = 3V CODE = 0x000 SAMPLE SIZE = 300 UNITS VDD = 5V, VLOGIC = 0V 30 80 VDD = 3.6V, VLOGIC = 2.4V IOUT (mA) 70 60 20 50 VDD = 3V, VLOGIC = 0V 30 20 -55 -35 -15 5 25 45 65 85 105 125 0 01121-019 10 40 01121-016 SUPPLY CURRENT (A) 10k FREQUENCY (Hz) SUPPLY VOLTAGE (V) 90 TA = 25C VDD = 5V 5% 01121-015 THRESHOLD VOLTAGE (V) 3.5 10M 60 CODE = 0xFFF VREF = 2V RS LOGIC VOLTAGE VARIED 4.0 1M Figure 14. Supply Current vs. Clock Frequency AD7392 4.5 100k CLOCK FREQUENCY (Hz) Figure 11. Supply Current vs. Logic Input Voltage 100 c 200 55 0 b 01121-017 SUPPLY CURRENT (A) 90 50 AD7392 AD7392 0 1 2 3 VOUT (V) TEMPERATURE (C) Figure 13. Supply Current vs. Temperature Figure 16. IOUT at Zero Scale vs. VOUT Rev. C | Page 9 of 20 4 5 AD7392/AD7393 5 AD7392 2s 0 VOUT (5mV/DIV) GAIN (dB) -5 VDD = 5V VREF = 100mV + 2VDC DATA = 0xFFF -10 -15 -20 -25 01121-023 CS (5V/DIV) 20mV 01121-020 VDD = 5V VREF = 2.5V fCLK = 50kHz CODE: 0x7F TO 0x80 -30 10 100 1k TIME (2s/DIV) 10k 100k FREQUENCY (Hz) Figure 17. Midscale Transition Performance Figure 20. Reference Multiplying Bandwidth 2.0 VDD = 5V VREF = 2.5V CS = HIGH 5s AD7392 1.8 VDD = 5V CODE = 0x768 TA = 25C 1.6 1.4 INL (LSB) VOUT (5mV/DIV) 1.2 1.0 0.8 0.6 0.2 01121-021 5mV 01121-024 0.4 D0 TO D11 (5V/DIV) 0 0 1 TIME (5s/DIV) 2 3 4 5 REFERENCE VOLTAGE (V) Figure 18. Digital Feedthrough Figure 21. Integral Nonlinearity Error vs. Reference Voltage 1.2 AD7392 SAMPLE SIZE = 50 NOMINAL CHANGE IN VOLTAGE (mV) AD7392 VOUT (1V/DIV) VDD = 5V VREF = 2.5V 01121-022 CS (5V/DIV) 1V TIME (100s/DIV) 1.0 0.8 CODE = 0xFFF 0.6 0.4 CODE = 0x000 0.2 0 01121-025 100s 0 100 200 300 400 500 HOURS OF OPERATION AT 150C Figure 19. Large Signal Settling Time Figure 22. Long-Term Drift Accelerated by Burn-In Rev. C | Page 10 of 20 600 AD7392/AD7393 1.0 5V VDD = 5V VREF = 2.5V CODE = 0xFFF 90 0.4 RL = 1M TO GND TA = 25C 2 0 0.2 0 -0.2 -0.4 1 10 0 0% -0.6 -0.8 01121-026 SHDN DNL (LSB) 0 VOUT (V) VDD = 2.7V VREF = 2.5V TA = 25C 0.6 100 IDD (A) 50 AD7392 0.8 100s 2V 01121-002 100 AD7392 500mV -1.0 0 512 1024 TIME (100s/DIV) 2048 2560 3072 3584 4096 CODE (Decimal) Figure 23. Shutdown Recovery Time Figure 25. AD7392 Differential Nonlinearity Error vs. Code 1.0 1000 1536 AD7392 AD7393 0.8 VDD = 2.7V VREF = 2.5V TA = 25C 0.6 DNL (LSB) 100 0.2 0 -0.2 -0.4 10 -55 -35 -15 5 25 45 65 85 105 125 01121-003 -0.6 VDD = 5.5V VREF = 2.5V SHDN = 0V 01121-027 SUPPLY CURRENT (nA) 0.4 -0.8 -1.0 0 128 256 384 512 640 768 896 CODE (Decimal) TEMPERATURE (C) Figure 26. AD7393 Differential Nonlinearity Error vs. Code Figure 24. Shutdown Current vs. Temperature Rev. C | Page 11 of 20 1024 AD7392/AD7393 THEORY OF OPERATION AMPLIFIER SECTION The internal DACs output is buffered by a low power consumption precision amplifier. The op amp has a 60 s typical settling time to 0.1% of full scale. There are slight differences in settling time for negative slew signals vs. positive. Also, negative transition settling time to within the last 6 LSBs of 0 V has an extended settling time. The rail-to-rail output stage of this amplifier has been designed to provide precision performance while operating near either power supply. Figure 27 shows an equivalent output schematic of the rail-to-rail amplifier with its N-channel pulldown FETs that pull an output load directly to GND. The output sourcing current is provided by a P-channel, pull-up device that can source current-to-GND terminated loads. VDD P-CH N-CH AGND Figure 27. Equivalent Analog Output Circuit DIGITAL-TO-ANALOG CONVERTERS The voltage switched R-2R DAC generates an output voltage that depends on the external reference voltage connected to the VREF pin according to Equation 1. VOUT = VREF x D 2N (1) where: D is the decimal data-word loaded into the DAC register. N is the number of bits of DAC resolution. D 1024 (2) Using Equation 2, the nominal midscale voltage at VOUT is 1.25 V, for D = 512; full-scale voltage is 2.497 V. The LSB step size is 2.5 x 1/1024 = 0.0024 V. If the 12-bit AD7392 uses a 5.0 V reference, Equation 1 becomes VOUT = V REF x D 4096 The rail-to-rail output stage provides 1 mA of output current. The N-channel output pull-down MOSFET, shown in Figure 27, has a 35 on resistance that sets the sink current capability near ground. In addition to resistive load driving capability, the amplifier also has been carefully designed and characterized for up to 100 pF capacitive load driving capability. REFERENCE INPUT If the 10-bit AD7393 uses a 2.5 V reference, Equation 1 becomes VOUT = 2.5 x VOUT 01121-028 The AD7392/AD7393 comprise a set of pin-compatible, 12-/10bit digital-to-analog converters (DACs). These single-supply operation devices consume less than 100 A of current while operating from 2.7 V to 5.5 V power supplies, making them ideal for battery-operated applications. They contain a voltageswitched, 12-/10-bit, laser-trimmed DAC; rail-to-rail output op amps; and a parallel input DAC register. The external reference input has constant input resistance independent of the digital code setting of the DAC. In addition, the reference input can be tied to the same supply voltage as VDD, resulting in a maximum output voltage span of 0 V to VDD. The parallel data interface consists of a CS write strobe and 12 data bits (D0 to D11) if utilizing the AD7392 or 10 data bits (D0 to D9) if utilizing the AD7393. An RS pin is available to reset the DAC register to zero scale. This function is useful for power-on reset or system failure recovery to a known state. Additional power savings are accomplished by activating the SHDN pin, resulting in a 1.5 A maximum consumption sleep mode. While the supply voltage is on, data is retained in the DAC register to reset the DAC output when the part is taken out of shutdown (SHDN = 1). (3) Using Equation 3, the AD7392 provides a nominal midscale voltage of 2.50 V (for D = 2048) and a full-scale VOUT of 4.998 V. The LSB step size is 5.0 x 1/4096 = 0.0012 V. The reference input terminal has a constant input resistance independent of digital code, which results in reduced glitches on the external reference voltage source. The high 2.5 M input resistance minimizes power dissipation within the AD7392/ AD7393 DACs. The VREF input accepts input voltages ranging from ground to the positive supply voltage VDD. One of the simplest applications for saving an external reference voltage source is connecting the REF terminal to the positive VDD supply. This connection results in a rail-to-rail voltage output span maximizing the programmed range. The reference input accepts ac signals as long as they stay within the 0 V < VREF < VDD supply voltage range. The reference bandwidth and integral nonlinearity error performance are plotted in Figure 20 and Figure 21. The ratiometric reference feature makes the AD7392/ AD7393 an ideal companion to ratiometric analog-to-digital converters (ADCs) such as the AD7896. Rev. C | Page 12 of 20 AD7392/AD7393 POWER SUPPLY The very low power consumption of the AD7392/AD7393 is a direct result of a circuit design that optimizes the CBCMOS process. By using the low power characteristics of CMOS for the logic and the low noise, tight-matching of the complementary bipolar transistors, excellent analog accuracy is achieved. One advantage of the rail-to-rail output amplifiers used in the AD7392/ AD7393 is the wide range of usable supply voltage. The part is fully specified and tested for operation from 2.7 V to 5.5 V. FERRITE BEAD: 2 TURNS, FAIR-RITE #2677006301 5V TTL/CMOS LOGIC CIRCUITS + 100F ELECT. + 10F TO 22F + 0.1F TANT. CER. 01121-029 5V RETURN 5V POWER SUPPLY Figure 28. Use Separate Traces to Reduce Power Supply Noise Whether or not a separate power supply trace is available, generous supply bypassing reduces supply line induced errors. Local supply bypassing, consisting of a 10 F tantalum electrolytic in parallel with a 0.1 F ceramic capacitor, is recommended for all applications (see Figure 29). To minimize power dissipation from input logic levels that are near the VIH and VIL logic input voltage specifications, a Schmitt-trigger design was used that minimizes the input buffer current consumption compared to traditional CMOS input stages. Figure 11 is a plot of supply current vs. incremental input voltage, showing that negligible current consumption takes place when logic levels are in their quiescent state. The normal crossover current still occurs during logic transitions. A secondary advantage of this Schmitt trigger is the prevention of false triggers that would occur with slow moving logic transitions when a standard CMOS logic interface or opto-isolators are used. Logic inputs D11 to D0, CS, RS, and SHDN all contain the Schmitt-trigger circuits. DIGITAL INTERFACE The AD7392/AD7393 have a parallel data input. A functional block diagram of the digital section is shown in Figure 31, while Table 6 contains the truth table for the logic control inputs. The chip select pin (CS) controls loading of data from the data inputs on Pin D11 to Pin D0. This active low input places the input register into a transparent state allowing the data inputs to directly change the DAC ladder values. When CS returns to logic high within the data setup-and-hold time specifications, the new value of data in the input register are latched. See Table 6 for a complete listing of conditions. 1 OF 12 LATCHES OF THE DAC REGISTER 2.7V TO 5.5V 1 VREF VDD 0.1F + AD7392 D0 TO D11 OR 2 3 4 AD7393 19 CS VOUT SHDN RS CS RS GND Figure 31. Digital Control Logic 17, 18 * OPTIONAL EXTERNAL REFERENCE BYPASS Table 6. Control Logic Truth Table Figure 29. Recommended Supply Bypassing for the AD7392/AD7393 INPUT LOGIC LEVELS All digital inputs are protected with a Zener-type ESD protection structure that allows logic input voltages to exceed the VDD supply voltage (see Figure 30). This feature is useful if the user is driving one or more of the digital inputs with a 5 V CMOS logic input voltage level while operating the AD7392/AD7393 on a 3 V power supply. If this interface is used, make sure that the VOL of the 5 V CMOS meets the VIL input requirement of the AD7392/ AD7393 operating at 3 V. See Figure 12 for a graph of digital logic input threshold vs. operating VDD supply voltage. CS RS DAC Register Function H L 1 X2 H H H H L 1 Latched Transparent Latched with new data Loaded with all zeros Latched all zeros 1 2 = Positive logic transition. X = Don't care. VDD GND 1k 01121-031 LOGIC IN TO INTERNAL DAC SWITCHES Dx 10F 01121-005 20 C 01121-030 * Figure 30. Equivalent Digital Input ESD Protection Rev. C | Page 13 of 20 AD7392/AD7393 RESET PIN (RS) UNIPOLAR OUTPUT OPERATION Forcing the asynchronous RS pin low sets the DAC register to all 0s, so the DAC output voltage is 0 V. The reset function is useful for setting the DAC outputs to 0 at power-up or after a power supply interruption. Test systems and motor controllers are two of many applications that benefit from powering up to a known state. The external reset pulse can be generated by three methods: This is the basic mode of operation for the AD7392. The AD7392 is designed to drive loads as low as 5 k in parallel with 100 pF (see Figure 32). The code table for this operation is shown in Table 7. The microprocessor's power-on RESET signal * An output from the microprocessor * An external resistor and capacitor 2.7V TO 5.5V R 1 0.01F 0.1F RESET has a Schmitt-trigger input, which results in a clean reset function when using external resistor-/capacitor-generated pulses (see Table 6). EXT REF 20 AD7392 VREF VOUT GND POWER SHUTDOWN (SHDN) 19 RL 5k 17, 18 Maximum power savings can be achieved by using the power shutdown control function. This hardware-activated feature is controlled by the active low input SHDN pin. This pin has a Schmitt-trigger input that helps desensitize it to slowly changing inputs. Setting this pin to logic low reduces the internal consumption of the AD7392/AD7393 to nanoamp levels, guaranteed to 1.5 A maximum over the operating temperature range. If power is present at all times on the VDD pin while in shutdown mode, the internal DAC register retains the last programmed data value. The digital interface is still active in shutdown so that code changes can be made that produce new DAC settings when the device is taken out of shutdown. This data is used when the part is returned to the normal active state by placing the DAC back to its programmed voltage setting. Figure 23 shows a plot of shutdown recovery time with both IDD and VOUT displayed. In the shutdown state, the DAC output amplifier exhibits an open-circuit high resistance state. Any load that is connected stabilizes at its termination voltage. If the power shutdown feature is not needed, the user should tie the SHDN pin to the VDD voltage to disable this function. 10F VDD NOTES 1. DIGITAL INTERFACE CIRCUITRY OMITTED FOR CLARITY CL 100pF 01121-032 * The circuit can be configured with an external reference plus power supply or powered from a single dedicated regulator or reference depending on the application performance requirements. Figure 32. AD7392 Unipolar Output Operation Table 7. Unipolar Code Table DAC Register No. Hexadecimal Decimal 0xFFF 4095 0x801 2049 0x800 2048 0x7FF 2047 0x000 0 Rev. C | Page 14 of 20 Output Voltage (V), VREF = 2.5 V 2.4994 1.2506 1.2500 1.2494 0 AD7392/AD7393 Although the AD7393 is designed for single-supply operation, the output can be easily configured for bipolar operation. A typical circuit is shown in Figure 33. This circuit uses a clean, regulated 5 V supply for power, which also provides the circuit's reference voltage. Since the AD7393 output span swings from ground to very near 5 V, it is necessary to choose an external amplifier with a common-mode input voltage range that extends to its positive supply rail. The micropower consumption OP196 is designed just for this purpose and results in only 50 A of maximum current consumption. Connecting the two 470 k resistors results in a differential amplifier mode of operation with a voltage gain of 2, which produces a circuit output span of 10 V, that is, -5 V to +5 V. As the DAC is programmed from zero-code 0x000 to midscale 0x200 to full scale 0x3FF, the circuit output voltage, VO, is set at -5 V, 0 V, and +5 V (minus 1 LSB). The output voltage, VO, is coded in offset binary according to Equation 4. D VO = - 1 x 5 512 (4) where D is the decimal code loaded in the AD7393 DAC register. Note that the LSB step size is 10/1024 = 10 mV. This circuit is optimized for micropower consumption including the 470 k gain setting resistors, which should have low temperature coefficients to maintain accuracy and matching (preferably the same resistor material, such as metal film). If higher resolution is required, the AD7392 can be used with two additional bits of data inserted into the software coding, which results in a 2.5 mV LSB step size. Table 8 shows examples of nominal output voltages (VO) provided by the bipolar operation circuit application. ISY <162A +5V 470k <2A C <100A VDD VREF 470k AD7393 <50A OP196 VOUT +5V VO BIPOLAR OUTPUT SWING -5V GND -5V NOTES 1. DIGITAL INTERFACE CIRCUITRY OMITTED FOR CLARITY Figure 33. Bipolar Output Operation Table 8. Bipolar Code Table DAC Register No. Hexadecimal Decimal 0x3FF 1023 0x201 513 0x200 512 0x1FF 511 0x000 0 If better stability is required, the power supply may be substituted with a precision reference voltage such as the low dropout REF195, which can easily supply the circuit's 162 A of current, and still provide additional power for the load connected to VO. The micropower REF195 is guaranteed to source 10 mA output drive current, but consumes only 50 A internally. Rev. C | Page 15 of 20 Analog Output Voltage (V) +4.9902 +0.0097 0.0000 -0.0097 -5.0000 01121-033 BIPOLAR OUTPUT OPERATION AD7392/AD7393 OUTLINE DIMENSIONS 1.060 (26.92) 1.030 (26.16) 0.980 (24.89) 20 11 1 10 0.280 (7.11) 0.250 (6.35) 0.240 (6.10) 0.325 (8.26) 0.310 (7.87) 0.300 (7.62) 0.100 (2.54) BSC 0.060 (1.52) MAX 0.210 (5.33) MAX 0.015 (0.38) MIN 0.150 (3.81) 0.130 (3.30) 0.115 (2.92) 0.022 (0.56) 0.018 (0.46) 0.014 (0.36) SEATING PLANE 0.195 (4.95) 0.130 (3.30) 0.115 (2.92) 0.015 (0.38) GAUGE PLANE 0.430 (10.92) MAX 0.005 (0.13) MIN 0.014 (0.36) 0.010 (0.25) 0.008 (0.20) 0.070 (1.78) 0.060 (1.52) 0.045 (1.14) 070706-A COMPLIANT TO JEDEC STANDARDS MS-001 CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. CORNER LEADS MAY BE CONFIGURED AS WHOLE OR HALF LEADS. Figure 34. 20-Lead Plastic Dual In-Line Package [PDIP] Narrow Body (N-20) Dimensions shown in inches and (millimeters) 13.00 (0.5118) 12.60 (0.4961) 20 11 7.60 (0.2992) 7.40 (0.2913) 10 2.65 (0.1043) 2.35 (0.0925) 0.30 (0.0118) 0.10 (0.0039) COPLANARITY 0.10 10.65 (0.4193) 10.00 (0.3937) 1.27 (0.0500) BSC 0.51 (0.0201) 0.31 (0.0122) SEATING PLANE 0.75 (0.0295) 0.25 (0.0098) 8 0 0.33 (0.0130) 0.20 (0.0079) COMPLIANT TO JEDEC STANDARDS MS-013-AC CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 35. 20-Lead Standard Small Outline Package [SOIC_W] Wide Body (RW-20) Dimensions shown in millimeters and (inches) Rev. C | Page 16 of 20 45 1.27 (0.0500) 0.40 (0.0157) 060706-A 1 AD7392/AD7393 ORDERING GUIDE Model AD7392AN AD7392ANZ 1 AD7392AR AD7392AR-REEL AD7392ARZ1 AD7392ARZ-REEL1 AD7393AN AD7393AR AD7393ARZ1 1 Resolution (Bits) 12 12 12 12 12 12 10 10 10 Temperature Range -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +125C -40C to +125C Z = RoHS Compliant Part. Rev. C | Page 17 of 20 Package Description 20-Lead PDIP 20-Lead PDIP 20-Lead SOIC_W 20-Lead SOIC_W 20-Lead SOIC_W 20-Lead SOIC_W 20-Lead PDIP 20-Lead SOIC_W 20-Lead SOIC_W Package Option N-20 N-20 RW-20 RW-20 RW-20 RW-20 N-20 RW-20 RW-20 AD7392/AD7393 NOTES Rev. C | Page 18 of 20 AD7392/AD7393 NOTES Rev. C | Page 19 of 20 AD7392/AD7393 NOTES (c)1996-2007 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. C01121-0-8/07(C) Rev. C | Page 20 of 20