DATA SHEET| FEBRUARY 2006
For more information on this and other products:
Contact Sales at Ortel 626-293-3400, or visit www.ortel.com.
Applications
High performance supertrunking links
High power distribution networks
Redundant ring architectures
FTTx networks
Features
Full Functionality 1 RU EDFA
Low Noise Figure (Typ < 5dB )
Total Input Power Range:
–10 dBm to +12 dBm
+14 dBm to +27 dBm Output Power
Optional Internal Optical Power Splitters
Standard RS-232 Communi cation (RS-
485 or I2C is optional)
Key lock switch
Standard and Optional Gain Flatness
(1530nm - 1562nm)
VFD Panel Status Indicator
Low Electrical Power Consumption
Input / Output Isolation > 40/40 dB
Polarization Dependant Gain < 0.1 dB
Polarization Mode Dispersion < 0.5 ps
PONA 2100 Series Erbium Doped Fiber Amplifier
The Ortel PONA 2100 Series Erbium Doped Fiber Amplifier (EDFA)
is an ideal building block for OEM system integrators. The family of
PONA 2100 series EDFAs is designed to meet the most demanding
noise performance requirements of CATV applications, and
performs all the functions required of an optical amplifier for system
integration. PONA 2100 series EDFAs provide optical isolation on
the input and output of the gain block for stable, low noise operation.
The input and output optical signal power levels are detected for
monitoring and control. The input optical signal is amplified with
active gain control for a constant output power level, or with active
output power control for constant gain mode. The PONA 2100
series EDFAs also provide monitors and associated alarms for all
vital characteristics. The optical output of the PONA 2100 series
EDFAs can be split into multiple ports by an optional external
splitter.
DATA SHEET |FEBRUARY 2006
PONA 2100 Series EDFA Rev B
Ortel, a division of EMCORE 2of 4
Optical / Electrical Characteristics
PROPERTY UNIT LIMIT PONA MODELS COMMENTS
Product Code 2114 2117 2120 2122 2124 2126 2127
PERFORMANCE (note 1)
Operating Input Power Pin
(dBm) Max 12 12 12 12 12 12 12
Operating Input Power Pin
(dBm) Min -10 -10 -10 -10 -10 -10 -10
14 17 20 22 24 26 27
Output Power Po(dBm) +/-.25 +/- .25 +/- .25 +/- .25 +/- .25 +/- .25 +/- .25 Nominal
Noise Figure NF (dB) Typ/Max 4.5/5.0 4.5/5.0 4.5/5.0 4.5/5.0 5.0/5.5 5.0/5.5 5.0/5.5 -00 and -01 versions
(Note 2) NF (dB) Typ/Max 4.0/4.5 4.0/4.5 4.0/4.5 4.0/4.5 4.5/5.0 4.5/5.0 4.5/5.0 -02 version
NF (dB) Typ/Max 4.0/4.5 4.0/4.5 4.0/4.5 4.0/4.5 4.5/5.0 N/A N/A -03 version
Static Gain Flatness GF (dB) Max +/-0.5 +/-0.5 +/-0.5 +/-0.5 +/-0.5 +/-0.5 +/-0.5 (Note 3)
Dynamic Gain Flatness (dB) Max +/-1.0 +/-1.25 +/-1.5 +/-2.0 +/-2.0 +/-2.0 +/-2.0 -00 and -02 versions
(Note 4) (dB) Max +/-0.5 +/-0.5 +/-1.0 +/-1.0 +/-1.0 N/A N/A -01 version
(dB) Max +/-0.5 +/-0.5 +/-1.0 +/-1.0 +/-1.0 N/A N/A -03 version
Output Power Stability (dB) Max +/- 0.1 +/- 0.1 +/- 0.1 +/- 0.1 +/- 0.1 +/- 0.1 +/- 0.1 (Note 5)
Power Consumption
(steady state regime) Psys(W) Max 5 7 9 12 20 27 32 50oC Case
Notes:
1. Unless stated otherwise all specifications apply over the full temperature range and humidity
2. Measured with 8 evenly spread signals @ 25°C, Σ Pin = 0 dBm.
3. Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25°C
4. Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1545 nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25°C; Gain
Flattened Option with ∆G = +/-0.5dB is available for some Models
5. Stability over polarization and temperature
General and Mechanical Specifications
PROPERTY REQUIREMENT COMMENTS
GENERAL
Operating Wavelength 1530 ~ 1562nm Standard
Operating Case Temperature 0°C to 50°C
Storage Temperature -40°C to 85°C
Operating Humidity 20% to 85% Non-condensing
Voltage Supply Range 85 VAC to 265 VAC 50/60 Hz
-36 to –60 V DC
Standard
Optional
Optical Connectors SC/APC; SC/UPC; FC/APC;
FC/UPC; E2000/APC User Specified
Dimensions In Inches 19.0”W x 14.76”D x 1.72”H 19’’ Rack Mounted, 1U
DATA SHEET |FEBRUARY 2006
PONA 2100 Series EDFA Rev B
Ortel, a division of EMCORE 3of 4
Outline Drawing AC and DC versions shown below with 8-port option
DC Version
AC Version
DATA SHEET |FEBRUARY 2006
PONA 2100 Series EDFA Rev B
Ortel, a division of EMCORE 4of 4
Compliance Information
89/336/EEC Electromagnetic Compatibility Directive, amended by 92/31/EEC & 93/68/EEC
73/23/EEC Low Voltage Directive, amended by 93/68/EEC
EN 50083-2, (2001) Cable networks for TV signals, sounds and interactive services, Part 2 Electromagnetic
Compatibility for equipment.
EN 55013 Mains Conducted Emissions
EN 61000-3-2 Mains Frequency and its Harmonics, Conducted Emissions
EN 55020 Radiation from Active Equipment, Radiated Immunity
EN 61000-4-6 Immunity of Active Equipment, Radiated Immunity
EN 61000-4-3 Immunity of Active Equipment, Radiated Immunity
EN 61000-4-2 Electrostatic Discharge Immunity
EN 61000-4-4 Electrical Fast Transient / Burst Immunity
EN 60950 Low Voltage Directives
EN 60825-1 Laser Safety Requirement
EN 60825-2 Laser Safety Requirement
CDRH Laser Safety Requirement
Ordering Information
PONA21 - - - -
Note: The maximum number of output ports when using E2000 connectors is four. All other optical connectors allow for
the eight ports option
Example:
PONA2120-2-AC-SC-00:
Standard 20 dBm EDFA with AC Power Supply, two (2) optical outputs, and SC/APC optical connectors
Optical
Output
Power
Output
Ports Input Voltag e Connector GFF/ NF options
14 - 14 dBm 1 AC – 90-260V 50/60 Hz SC - SC/APC 00 - Standard
17 - 17 dBm 2 DC – - 48 V FC - FC/APC 01 - Standard with Gain Flattened option
20 - 20 dBm 4 EC - E2000/APC 02 - Standard with Low NF option
22 - 22 dBm 8 TC - SC/UPC 03 - Low NF and Gain Flattened
24 - 24 dBm
GC - FC/UPC
26 - 26 dBm
27 - 27 dBm
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. Ortel, the Ortel logo, EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation.
Ortel, a division of EMCORE
2015 West Chestnut Street
A
lhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.ortel.com
© Copyright 2005. EMCORE Corporation
