Emboss Tape SH CONNECTOR 1.0mm pitch/Disconnectable Crimp style connectors Specifications ------------------- * Current rating: 1.0A AC, DC (AWG #28) * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/20m max. After environmental testing/40m max. * Insulation resistance: 100M min. * Withstanding voltage: 500V AC/minute * Applicable wire: Conductor size/AWG #32 to #28 Insulation O.D./0.4 to 0.8mm * RoHS compliant products are published. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. 15 14 13 12 11 10 9 8 7 5 6 4 2 3 The world's first 1.0mm pitch crimp style connector. * Compact, low profile design * Compatible with the SR insulation displacement connectors * Housing lances Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 PC board layout (viewed from component side) and Assembly layout Top entry type Side entry type 2.9 6.25 0.6 0.05 0.70.1 1.20.1 Header outline 1.0 0.05 2.95 6.3 1.8 0.1 4.0 0.1 5.55 0.1 1.2 1.0 0.05 0.20.1 0.7 1.8 0.1 2.650.1 4.2 0.1 Header outline 0.1 0.2 0.1 0.6 0.05 0.1 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. Contact Model No. mm2 3.9 2.0 0.5 0.8 SSH-003T-P0.2-H 1.6 1.55 Applicable wire Insulation O.D. (mm) AWG# 0.032 0.08 3228 0.40.8 Q'ty / reel 23,000 Material and Finish 1.35 Phosphor bronze, tin-plated (reflow treatment) RoHS compliance Note: Contact JST for gold-plated products. 0.45 0.8 Contact Crimping machine Crimp applicator SSH-003T-P0.2-H AP-K2N Applicator Dies Crimp applicator with dies MKS-L-10-3 MK/SSH/L-003-02 APLMK SSH/L003-02 *MKS-SC SC/SSH/L-003-02 APLSC SSH/L003-02 Note: *Strip-crimp applicator Contact JST for applicable wires in case that it is not usable due to wire size. 2 SH CONNECTOR Housing With protrusions B A 1.0 2 2.8 3 4 N Circuit No.1 3 2 5 5.0 6 7 8 9 2.1 10 11 Without protrusions 12 13 B A 14 1.0 2.8 15 20 N Circuit No.1 Model No. Circuits A With protrusions Without protrusions SHR-02V-S-B SHR-02V-S SHR-03V-S-B SHR-03V-S SHR-04V-S-B SHR-04V-S SHR-05V-S-B SHR-05V-S SHR-06V-S-B SHR-06V-S SHR-07V-S-B SHR-07V-S SHR-08V-S-B SHR-08V-S SHR-09V-S-B SHR-09V-S SHR-10V-S-B SHR-10V-S SHR-11V-S-B SHR-11V-S SHR-12V-S-B SHR-12V-S SHR-13V-S-B SHR-13V-S SHR-14V-S-B SHR-14V-S SHR-15V-S-B SHR-15V-S SHR-20V-S-B Dimensions (mm) Q'ty / B box With protrusions Without protrusions 1.0 5.0 3.0 2,000 2.0 6.0 4.0 2,000 3.0 7.0 5.0 2,000 4.0 8.0 6.0 2,000 5.0 9.0 7.0 2,000 6.0 10.0 8.0 2,000 7.0 11.0 9.0 2,000 8.0 12.0 10.0 2,000 9.0 13.0 11.0 2,000 10.0 14.0 12.0 2,000 11.0 15.0 13.0 2,000 12.0 16.0 14.0 2,000 13.0 17.0 15.0 2,000 14.0 18.0 16.0 2,000 19.0 23.0 21.0 1,000 3 2 5.0 Material PBT, UL94V-0, natural (white) RoHS compliance 2.1 Shrouded header The shrouded headers are interchangeable with those of the SR insulation displacement connectors. Top entry type Circuits 4.25 Circuit No.1 1.5 2.9 1.0 A B 0.7 Side entry type Circuit No.1 Model No. Top entry type Side entry type Dimensions (mm) A B Q'ty / reel Top entry type Side entry type 2 BM02B-SRSS-TB SM02B-SRSS-TB 1.0 4.0 1,500 3,000 3 BM03B-SRSS-TB SM03B-SRSS-TB 2.0 5.0 1,500 3,000 4 BM04B-SRSS-TB SM04B-SRSS-TB 3.0 6.0 1,500 3,000 5 BM05B-SRSS-TB SM05B-SRSS-TB 4.0 7.0 1,500 3,000 6 BM06B-SRSS-TB SM06B-SRSS-TB 5.0 8.0 1,500 3,000 7 BM07B-SRSS-TB SM07B-SRSS-TB 6.0 9.0 1,500 3,000 8 BM08B-SRSS-TB SM08B-SRSS-TB 7.0 10.0 1,500 3,000 9 BM09B-SRSS-TB SM09B-SRSS-TB 8.0 11.0 1,500 3,000 10 BM10B-SRSS-TB SM10B-SRSS-TB 9.0 12.0 1,500 3,000 11 BM11B-SRSS-TB SM11B-SRSS-TB 10.0 13.0 1,500 3,000 12 BM12B-SRSS-TB SM12B-SRSS-TB 11.0 14.0 1,500 3,000 13 BM13B-SRSS-TB SM13B-SRSS-TB 12.0 15.0 1,500 3,000 14 BM14B-SRSS-TB SM14B-SRSS-TB 13.0 16.0 1,500 3,000 15 BM15B-SRSS-TB 14.0 17.0 1,500 3,000 20 SM15B-SRSS-TB SM20B-SRSS-TB 19.0 22.0 3,000 Material and Finish 2.9 Contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Housing: PA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) 1.0 1.5 A B 4.25 0.7 RoHS compliance This product displays (LF)(SN) on a label. Note: 1. The products listed above are supplied on embossed-tape. 2. Contact JST for the headers with gold-plated pins. 3. Contact JST for the top entry type headers with suction cap. 3 SH CONNECTOR Taping specifications ------------------------------------------------------ Feeding direction Feeding direction 3802.0 Carrier tape (13) W1+2.5 -1.0 Cover tape leader The end part Connector 160min. mounting part Leader part 100min. 400min. 2.00.5 Top entry type Side entry type Feeding direction F0.1 1.550.05 4.00.1 2.00.1 Cover tape Carrier tape 8.00.1 12.00.1 Taping dimensions (mm) F Circuits 1.750.1 Carrier tape W0.3 1.750.1 F0.1 Cover tape W0.3 1.550.05 4.00.1 2.00.1 Feeding direction W Reel dimensions (mm) W1 Side entry type Top entry type 13.5 13.5 Q'ty / reel Top entry type Side entry type 1,500 3,000 13.5 1,500 3,000 17.5 13.5 1,500 3,000 16.0 17.5 17.5 1,500 3,000 16.0 16.0 17.5 17.5 1,500 3,000 7.5 16.0 16.0 17.5 17.5 1,500 3,000 11.5 7.5 24.0 16.0 25.5 17.5 1,500 3,000 9 11.5 11.5 24.0 24.0 25.5 25.5 1,500 3,000 10 11.5 11.5 24.0 24.0 25.5 25.5 1,500 3,000 11 11.5 11.5 24.0 24.0 25.5 25.5 1,500 3,000 12 11.5 11.5 24.0 24.0 25.5 25.5 1,500 3,000 13 11.5 11.5 24.0 24.0 25.5 25.5 1,500 3,000 14 11.5 11.5 24.0 24.0 25.5 25.5 1,500 3,000 15 11.5 11.5 24.0 24.0 25.5 25.5 1,500 3,000 20 - 20.2 - 44.0 - 45.5 - 3,000 Top entry type Side entry type 2 5.5 3 5.5 Top entry type 12.0 Side entry type 12.0 5.5 5.5 12.0 12.0 13.5 4 7.5 5.5 16.0 12.0 5 7.5 7.5 16.0 6 7.5 7.5 7 7.5 8 Note: 1. Specifications conform to JIS C 0806. The tape width, connector loading recess square hole dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. Note: 2. Specifications are subject to change without prior notice.