SK22 - SK2B
SURFACE MOUNT
SCHOTTKY BARRIER RECTIFIERS
PRV : 20 - 100 Volts
I
O
: 2.0 Amperes
FEATURES :
* High current capability
* High surge current capability
* High reliability
* High efficiency
* Low power loss
* Low cost
* Low forward voltage drop
MECHANICAL DATA :
* Case : SMB Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Lead Formed for Surface Mount
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 0.093 gram
Rating at 25
°
C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL SK 22 SK 23 SK 24 SK 25 SK 26 SK 27 SK 28 SK 29 SK 2B UNIT
Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 70 80 90 100 Volts
Maximum RMS Voltage VRMS 14 21 28 35 42 49 56 63 70 Volts
Maximum DC Blocking Voltage VDC 20 30 40 50 60 70 80 90 100 Volts
Maximum Average Forward Current See Fig.1 IF(AV)2.0 Amps.
Peak Forward Surge Current,
8.3ms single half sine wave superimposed
on rated load (JEDEC Method) IFSM 60 Amps.
Maximum Forward Voltage at IF = 2.0 Amps. (Note 1) VF0.5 0.74 0.79 Volt.
Maximum Reverse Current at
Rated DC Blocking Voltage (Note 1) IR0.5 mA
Junction Temperature Range TJ - 65 to + 125 - 65 to + 150 °C
Storage Temperature Range TSTG - 65 to + 150 °C
Notes :
(1) Pulse Test : Pulse Width = 300 µs, Duty Cycle = 2%. UPDATE : SEPTEMBER 12, 1998
RATING
0.22 ± 0.07
2.0
±
0.1
5.4 ± 0.15
2.3
±
0.2
4.8 ± 0.15
3.6 ± 0.15
SMB (DO-214AA)
1.1 ± 0.3
Dimensions in millimeter
TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com
103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND
ELECTRONICS INDUSTRY (USA) CO., LTD.
RATING AND CHARACTERISTIC CURVES ( SK22 - SK2B )
FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
0
0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100
LEAD TEMPERATURE, (°C) NUMBER OF CYCLES AT 60Hz
FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS
0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1
2.0
1.5
1.0
0.5
2.5
60
0
75
0
45
30
15
PEAK FORWARD SURGE
CURRENT, AMPERES
AVERAGE FORWARD CURRENT,
AMPERES
10
1.0
80
0.01
0.1
100 1400 20 40 60 120
PERCENT OF RATED REVERSE
VOLTAGE, (%)
TJ= 100 °C
TJ = 25 °C
REVERSE CURRENT, MILLIAMPERES
SK22
SK23
SK24
SK25
THRU
SK2B
1.0
0.1
10
FORWARD CURRENT, AMPERES
FORWARD VOLTAGE, VOLTS
20
SK25
SK26
SK27
TJ = 25 °C
PULSE WIDTH = 300µs
DUTY CYCLE = 2%
SK22
SK23
SK24
SK28
SK29
SK2B
TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com
103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND
ELECTRONICS INDUSTRY (USA) CO., LTD.