19-0137; Rev 1; 3/94 Improved Low-Power, CMOS Analog Switches with Latches ______________________New Features Plug-In Upgrades for Industry-Standard DG421/DG423/DG425 Improved r(DS)ON Match Between Channels (3 max) Guaranteed rFLAT(ON) Over Signal Range (4 max) Improved Charge Injection (15pC max) Improved Off Leakage Current Over Temperature (<5nA at +85C) Withstands Electrostatic Discharge (2000V min) per Method 3015.7 _______________________Applications Sample-and-Hold Circuits Fax Machines Battery-Operated Systems Guidance and Control Systems Audio Signal Routing Modems Test Equipment PBX, PABX Military Radios Communication Systems __________________Existing Features Low rDS(ON) (35 max) Single-Supply Operation +10V to +30V Bipolar-Supply Operation 4.5V to 20V Low Power Consumption (35W max) Rail-to-Rail Signal Handling Capability TTL/CMOS-Logic Compatible ______________Ordering Information PART TEMP. RANGE PIN-PACKAGE DG421CJ 0C to +70C 16 Plastic DIP DG421CY 0C to +70C 16 SO DG421C/D 0C to +70C Dice* DG421DJ -40C to +85C 16 Plastic DIP DG421DY -40C to +85C 16 SO DG421DK -40C to +85C 16 CERDIP DG421AK -55C to +125C 16 CERDIP** Ordering Information continued at end of data sheet. * Contact factory for dice specifications. **Contact factory for availability and processing to MIL-STD-883B. __Functional Diagrams/Truth Tables _________________Pin Configurations TOP VIEW S1 D1 WR CK IN1 D D RS S2 DG421 CK IN2 R R Q D2 TWO SPST SWITCHES PER PACKAGE 16 S1 15 IN1 DG421 TRUTH TABLE N.C. 3 WR RS IN SWITCH N.C. 4 Off On N.C. 5 12 V L N.C. 6 11 V+ 0 Q D1 1 WR 2 1 0 1 LOGIC "O" 0.8V LOGIC "1" 2.4V SWITCHES SHOWN FOR LOGIC "1" INPUT Functional Diagrams/Truth Tables continued at end of data sheet. 14 V- DG421 RS 7 D2 8 13 GND 10 IN2 9 S2 DIP N.C. = No Internal Connection Pin Configurations continued at end of data sheet. ________________________________________________________________ Maxim Integrated Products Call toll free 1-800-998-8800 for free samples or literature. 1 DG421/DG423/DG425 _______________General Description Maxim's redesigned DG421/DG423/DG425 monolithic analog switches now feature guaranteed on-resistance matching (3 max) between switches and on-resistance flatness over the signal range (4 max). These low onresistance switches (20 typ) conduct equally well in both directions. They guarantee a low charge injection of 15pC maximum and an ESD tolerance of 2000V minimum per Method 3015.7. Off leakage current over temperature has also been reduced (less than 5nA at +85C). The DG421/DG423/DG425 are precision, dual CMOS switches with latchable logic inputs that simplify interfacing with microprocessors (Ps). The single-pole/singlethrow DG421 and double-pole/single-throw DG425 are normally open dual switches. The dual, singlepole/double-throw DG423 has two normally open and two normally closed switches. Fast switching times (175ns for t ON and 145ns for t OFF ) and low power consumption (35W max) make these parts ideal for battery-powered applications requiring P-compatible switches. Operation is from a single +10V to +30V supply, or bipolar 4.5V to 20V supplies. Fabricated with the same 44V silicon-gate process, these switches have rail-to-rail signal handling capabilities. DG421/DG423/DG425 Improved Low-Power, CMOS Analog Switches with Latches ABSOLUTE MAXIMUM RATINGS Voltage Referenced to VV+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44V GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25V VL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (GND - 0.3V) to (V+ + 0.3V) Digital Inputs, VS, VD (Note 1) . . . . . . . . . . . . . . (V- - 2V) to (V+ + 2V) Current (any terminal, except S or D) .................................30mA Continuous Current, S or D .................................................20mA Peak Current, S or D (pulsed at 1ms, 10% duty cycle max)...100mA Continuous Power Dissipation (TA = +70C) 16-Pin Plastic DIP (derate 10.53mW/C above +70C) . . .842mW 20-Pin PLCC (derate 10.00mW/C above +70C) . . . . . 800mW 16-Pin CERDIP (derate 10.00mW/C above +70C) . . . 800mW Operating Temperature Ranges DG42_C_ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to +70C DG42_D_ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40C to +85C DG42_A_ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55C to +125C Storage Temperature Ranges DG42_C_/DG42_D_ . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to +125C DG42_A_ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to +150C Lead Temperature (soldering, 10sec). . . . . . . . . . . . . . . . . . . . +300C Note 1: Signals on S, D, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (V+ = 15V, V- = -15V, VL = +5V, GND = 0V, VINH = +2.4V, VINL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS DG42_C, DG42_D MIN TYP MAX (Note 2) MIN DG42_A TYP MAX (Note 2) UNITS SWITCH Analog Signal Range Drain-Source On-Resistance rDS(ON) On-Resistance Match Between Channels (Note 4) rDS(ON) On-Resistance Flatness (Note 4) rFLAT(ON) Source-Off Leakage Current (Note 5) IS(OFF) Drain-Off Leakage Current (Note 5) ID(OFF) Drain-On Leakage Current (Note 5) 2 VANALOG ID(ON) (Note 3) V+ = 13.5V, V- = -13.5V, IS = -10mA, VD = 10V -15 TA = +25C 15 20 -15 45 15 20 V 35 TA = TMIN to TMAX 45 45 V+ = 16.5V, V- = -16.5V, IS = -10mA, VD = 10V TA = +25C 3 3 TA = TMIN to TMAX 4 4 V+ = 15V, V- = -15V, IS = -10mA, VD = 5V TA = +25C 4 4 TA = TMIN to TMAX 5 5 V+ = 16.5V, V- = -16.5V, VD = 15.5V, VS = m 15.5V TA = +25C V+ = 16.5V, V- = -16.5V, VD = 15.5V, VS = m 15.5V TA = +25C V+ = 16.5V, V- = -16.5V, VD = 15.5V, VS = 15.5V TA = +25C -1.0 TA = TMIN to TMAX -10 -0.50 -0.01 0.50 -0.25 -0.01 0.25 nA TA = TMIN to TMAX -5 5 -0.50 -0.01 0.50 -10 -0.25 -0.01 10 0.25 nA TA = TMIN to TMAX -5 5 -0.04 1.0 -10 -0.40 -0.04 10 0.40 nA 10 -20 _______________________________________________________________________________________ 20 Improved Low-Power, CMOS Analog Switches with Latches (V+ = 15V, V- = -15V, VL = +5V, GND = 0V, VINH = +2.4V, VINL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER INPUT Input Current with Input Voltage High Input Current with Input Voltage Low SUPPLY Power Supply Range Positive Supply Current Negative Supply Current Logic Supply Current Ground Current SYMBOL IINH IINL V+, VI+ I- IL IGND CONDITIONS IN = 2.4V, all others = 0.8V IN = 0.8V, all others = 2.4V (Note 3) All channels on or off, V+ = 16.5V, V- = -16.5V, VIN = 0V or 5V All channels on or off, V+ = 16.5V, V- = -16.5V, VIN = 0V or 5V All channels on or off, V+ = 16.5V, V- = -16.5V, VIN = 0V or 5V All channels on or off, V+ = 16.5V, V- = -16.5V, VIN = 0V or 5V MIN -0.50 -0.50 TYP MAX (Note 2) 0.005 0.005 4.5 TA = +25C -1.0 TA = TMIN to TMAX -5.0 TA = +25C -1.0 TA = TMIN to TMAX -5.0 TA = +25C -1.0 TA = TMIN to TMAX -5.0 TA = +25C -1.0 TA = TMIN to TMAX -5.0 0.01 UNITS 0.50 0.50 A A 20 V 1.0 A 5.0 -0.01 1.0 A 5.0 -0.01 1.0 A 5.0 -0.01 1.0 A 5.0 DYNAMIC Turn-On Time tON Figure 2 Turn-Off Time tOFF Figure 2 tWW tDW Latch Timing VS = 10V, RL = 300, CL = 35pF, Figure 3 tWD Break-Before-Make Interval (Note 3) Charge Injection (Note 3) Off-Isolation Rejection Ratio (Note 6) TA = +25C TA = -55C to +125C TA = +25C TA = -55C to +125C TA = +25C TA = -55C to +125C TA = +25C 150 200 200 100 100 60 100 5 250 300 200 ns ns ns tD DG423, Figure 4 Q CL = 10nF, VG = 0V, RG = 0, Figure 5 TA = +25C 10 RL = 100, CL = 5pF, f = 1MHz, Figure 6 TA = +25C 72 dB RL = 50, CL = 5pF, f = 1MHz, Figure 7 TA = +25C 90 dB f = 1MHz, Figure 8 f = 1MHz, Figure 8 f = 1MHz, Figure 9 f = 1MHz, Figure 9 TA = +25C TA = +25C TA = +25C TA = +25C 12 12 39 39 pF pF pF pF OIRR Crosstalk (Note 7) Drain-Off Capacitance Source-Off Capacitance Drain-On Capacitance Source-On Capacitance TA = +25C TA = TMIN to TMAX CD(OFF) CS(OFF) CD(ON) CS(ON) 25 ns 15 pC Note 2: Typical values are for design aid only, are not guaranteed, and are not subject to production testing. The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in this data sheet. Note 3: Guaranteed by design. Note 4: On-resistance match between channels and flatness are guaranteed only with bipolar-supply operation. Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured at the extremes of the specified analog signal range. Note 5: Leakage parameters IS(OFF), ID(OFF), and ID(ON) are 100% tested at the maximum rated hot temperature and guaranteed by correlation at +25C. Note 6: Off-Isolation Rejection Ratio = 20log (VD/VS), VD = output, VS = input to off switch. Note 7: Between any two switches. _______________________________________________________________________________________ 3 DG421/DG423/DG425 ELECTRICAL CHARACTERISTICS (continued) __________________________________________Typical Operating Characteristics (TA = +25C, unless otherwise noted.) 30 A 30 B 25 20 C 20 100 rDS (ON) () 35 V- = 0V 120 TA = +125C TA = +85C TA = +25C 25 rDS (ON) () 15 V+ = 5V 80 60 TA = -55C D 15 V+ = 10V 40 10 10 V+ = 15V V+ = 15V, V- = -15V 5 -10 10 0 20 -10 -20 10 0 0 20 5 10 15 VD (V) VD (V) VD (V) ON-RESISTANCE vs. VD AND TEMPERATURE (SINGLE SUPPLY) OFF LEAKAGE CURRENTS vs. TEMPERATURE ON LEAKAGE CURRENTS vs. TEMPERATURE 100 MAX401-4 70 60 V+ = 16.5V V- = -16.5V VD = 15V VS = 15V 10 OFF LEAKAGE (nA) TA = +125C 50 TA = +85C 40 TA = +25C 30 20 100 MAX401-5 -20 V+ = 20V 20 5 V+ = 16.5V V- = -16.5V VD = 15V VS = 15V 10 ON LEAKAGE (nA) rDS (ON) () 40 35 1 0.1 0.01 20 MAX401-6 45 V+ = 5V, V- = -5V V+ = 10V, V- = -10V V+ = 15V, V- = -15V V+ = 20V, V- = -20V 140 MAX401-2 A: B: C: D: 50 MAX401-1 55 ON-RESISTANCE vs. VD (SINGLE SUPPLY) ON-RESISTANCE vs. VD AND TEMPERATURE (DUAL SUPPLIES) MAX401-3 ON-RESISTANCE vs. VD (DUAL-SUPPLIES) rDS (ON) () 1 0.1 0.01 0.001 0.001 V+ = 12V, V- = 0V 10 0.0001 0.0001 0 5 15 10 20 -75 125 25 VD (V) -75 SUPPLY CURRENT vs. TEMPERATURE 10 20 1 I+, I-, IL (A) 40 0 -20 -40 MAX401-8 100 MAX401-7 60 25 TEMPERATURE (C) TEMPERATURE (C) CHARGE INJECTION vs. ANALOG VOLTAGE Q (pC) DG421/DG423/DG425 Improved Low-Power, CMOS Analog Switches with Latches I+ at V+ = 16.5V 0.1 I- at V- = -16.5V 0.01 IL at VL = 5V 0.001 V+ = 15V, V- = -15V -60 0.0001 -20 -10 0 VD (V) 4 10 20 -75 25 TEMPERATURE (C) _______________________________________________________________________________________ 125 125 Improved Low-Power, CMOS Analog Switches with Latches __________Applications Information Operation with Supply Voltages Other Than 15V DG421 PIN NAME 1, 8 D1, D2 ------ WR 2 3, 4, 5, 6 FUNCTION Drain Terminals Write Select 7 N.C. ------ RS No Internal Connection 9, 16 S1, S2 10, 15 IN1, IN2 11 V+ Positive Supply 12 VL Logic Supply 13 GND 14 V- Reset Select The DG421/DG423/DG425 switches operate with 4.5V to 20V bipolar supplies or with a +10V to +30V single supply. In either case, analog signals ranging from V+ to V- can be switched. The Typical Operating Characteristics graphs illustrate typical analog-signal and supply-voltage on-resistance variations. The usual on-resistance temperature coefficient is 0.5%/C (typ). Source Terminals Logic Inputs These devices operate with a single positive supply or with bipolar supplies. They maintain TTL compatibility with supplies anywhere in the 4.5V to 20V range as long as VL = +5V. If VL is connected to V+ or another supply at voltages other than +5V, the devices will operate at CMOS-logic-level inputs. Input Control Ground Negative Supply Overvoltage Protection DG423/DG425 DIP PLCC NAME 1, 8, 3, 6 2, 10, 4, 8 Drain Terminals 2 3 D1-D4 ------ WR Source Terminals 16, 9, 4, 5 20, 12, 5, 7 FUNCTION Write Select 7 9 S1-S4 ------ RS 15, 10 19, 13 IN1, IN2 11 14 V+ Positive Supply 12 15 VL Logic Supply -- 1, 6, 11, 16 N.C. 14 18 V- 13 17 GND Resets Select Input Control No Internal Connection Proper power-supply sequencing is recommended for all CMOS devices. Do not exceed the absolute maximum ratings because stresses beyond the listed ratings may cause permanent damage to the devices. Always sequence V+ on first, followed by VL, V-, and logic inputs. If power-supply sequencing is not possible, add two small, external signal diodes in series with supply pins for overvoltage protection (Figure 1). Adding diodes reduces the analog signal range to 1V below V+ and 1V above V-, without affecting low switch resistance and low leakage characteristics. Device operation is unchanged, and the difference between V+ and V- should not exceed +44V. Negative Supply Ground V+ S D Vg V- Figure 1. Overvoltage Protection Using External Blocking Diodes _______________________________________________________________________________________ 5 DG421/DG423/DG425 ___________________Pin Descriptions DG421/DG423/DG425 Improved Low-Power, CMOS Analog Switches with Latches ______________________________________________Timing Diagrams/Test Circuits VOUT is the steady-state output with the switch on. Feedthrough via switch capacitance may result in spikes at the leading and trailing edge of the output waveform. LOGIC INPUT tR < 20ns tF < 20ns 3V 50% 0V VD = 10V for tON VD = -10V for tOFF tOFF VOUT SWITCH OUTPUT 0V +5V +15V VL V+ S D DG421 DG423 DG425 SWITCH OUTPUT VOUT RL GND LOGIC INPUT tON 0.9 x VOUT -VOUT V- -15V *VD = 10V for tON, VD = -10V for tOFF VOUT = VD REPEAT TEST FOR IN2 AND S2. NOTE: LOGIC INPUT WAVEFORM IS INVERTED FOR SWITCHES THAT HAVE THE OPPOSITE LOGIC SENSE. CL INCLUDES FIXTURE AND STRAY CAPACITANCE. Figure 2. Switching Time 3V WR 1.5V 0 tWW tDW 3V tWD 2.0V IN 0.8V 0 3V RS 1.5V 0 SWITCH VOUT 0 OUTPUT tRS tOFF(RS) 0.8 x VOUT Figure 3. Latch Timing 6 CL IN 0.9 x VOUT _______________________________________________________________________________________ R L ( RL + rDS(ON) ) Improved Low-Power, CMOS Analog Switches with Latches 3V LOGIC INPUT +5V DG423 0V D 0.9 x VOUT 0V VOUT1 VOUT2 S IN WR LOGIC INPUT RL2 300 GND CL2 35pF RL1 300 CL1 35pF V- 0.9 x VOUT VOUT2 SWITCH OUTPUT 2 V+ S VL RS D VD = 10V VD = 10V VOUT1 SWITCH OUTPUT 1 +15V 50% -15V CL INCLUDES FIXTURE AND STRAY CAPACITANCE. 0V tD RL = 1000 CL = 35pF tD Figure 4. DG423 Break-Before-Make Interval +5V VOUT RS VL Rg VOUT IN 0FF 0N +15V DG421 DG423 DG425 V+ S D Vg 0FF VOUT CL 10nF GND WR IN V- -15V Q = VOUT x CL IN DEPENDENT ON SWITCH CONFIGURATION. INPUT POLARITY DETERMINED BY SENSE OF SWITCH. VIN = 3V Figure 5. Charge Injection 10nF SIGNAL GENERATOR D +15V +5V V+ RS VL DG421 DG423 DG425 VS IN VD NETWORK ANALYZER 0V or 2.4V S GND WR V- RL -15V 10nF Figure 6 . Off-Isolation Rejection Ratio _______________________________________________________________________________________ 7 DG421/DG423/DG425 _________________________________Timing Diagrams/Test Circuits (continued) DG421/DG423/DG425 Improved Low-Power, CMOS Analog Switches with Latches _________________________________Timing Diagrams/Test Circuits (continued) +15V 10nF V+ SIGNAL GENERATOR D +5V RS VL IN 0V or 2.4V 0V or 2.4V D GND WR RL 50 S IN S NETWORK ANALYZER DG421 DG423 DG425 N.C. V-15V 10nF Figure 7. Crosstalk +15V 10nF V+ +5V RS D VL CAPACITANCE METER IN S V+ +5V RS D DG421 DG423 DG425 VL CAPACITANCE METER IN S GND WR Figure 8. Drain/Source-Off Capacitance GND WR V- -15V 8 0V or 2.4V +15V 10nF DG421 DG423 DG425 10nF V- -15V Figure 9. Drain/Source-On Capacitance _______________________________________________________________________________________ 10nF 0V or 2.4V Improved Low-Power, CMOS Analog Switches with Latches 15 IN1 D3 3 14 V- DG423 DG425 S3 5 D1 N.C. S1 IN1 20 19 13 GND 12 V L D4 6 11 V+ RS 7 10 IN2 D2 8 S2 9 DG423 DG425 18 V- 17 GND 16 N.C. N.C. 6 S4 7 15 VL D4 8 14 V+ DIP 9 10 D2 S4 5 4 1 RS S3 4 D3 2 11 12 13 IN2 WR 2 3 S2 16 S1 N.C. D1 1 WR TOP VIEW PLCC N.C. = No Internal Connection _____________________________Functional Diagrams/Truth Tables (continued) S1 S3 WR IN1 CK D1 S1 D1 D3 S3 D3 WR Q S2 S4 DG423 CK Q DG425 IN2 D R Q D R Q CK S2 S4 D2 D4 Q D R RS RS IN2 CK IN1 D R Q D2 D4 TWO SPDT SWITCHES PER PACKAGE TWO DPST SWITCHES PER PACKAGE DG423 TRUTH TABLE DG425 TRUTH TABLE WR 0 RS IN SWITCH 1, 2 SWITCH 3, 4 1 0 1 Off On On Off LOGIC "O" 0.8V LOGIC "1" 2.4V IN WR RS IN SWITCH 0 LATCH OPERATION TRUTH TABLE RS WR X 1 X 1 X X 0 0 1 0 1 Off On LOGIC "O" 0.8V LOGIC "1" 2.4V LATCH/SWITCH X Latch operation transparent. Control data latched in. Switches on or off as selected by last IN. X X All latches reset. Switches on or off as when IN = 0, WR = 0, RS = 1. _______________________________________________________________________________________ 9 DG421/DG423/DG425 _____________________________________________Pin Configurations (continued) DG421/DG423/DG425 Improved Low-Power, CMOS Analog Switches with Latches _Ordering Information (continued) PART TEMP. RANGE DG423CJ 0C to +70C 16 Plastic DIP PIN-PACKAGE DG423CY 0C to +70C 16 SO DG423C/D 0C to +70C Dice* DG423DJ -40C to +85C 16 Plastic DIP DG423DY -40C to +85C 16 SO DG423DN -40C to +85C 20 PLCC DG423DK -40C to +85C 16 CERDIP DG423AK -55C to +125C 16 CERDIP** DG425CJ 0C to +70C 16 Plastic DIP DG425CY 0C to +70C 16 SO DG425C/D 0C to +70C Dice* DG425DJ -40C to +85C 16 Plastic DIP DG425DY -40C to +85C 16 SO DG425DN -40C to +85C 20 PLCC DG425DK -40C to +85C 16 CERDIP DG425AK -55C to +125C 16 CERDIP** * Contact factory for dice specifications. **Contact factory for availability and processing to MIL-STD-883B. ___________________________________________________________Chip Topographies DG421 DG421 WR D1 DG423 DG423/DG425 S1 IN1 WR N.C. D1 S1 IN1 D3 V- N.C. GND N.C. V VLL V0.105" S3 GND (2.66mm) S4 VL VL V+ D4 RS RS D2 S2 IN2 D2 0.082" 0.082" (2.08mm) (2.08mm) TRANSISTOR COUNT: 100 SUBSTRATE CONNECTED TO V+ 10 V+ N.C. S2 IN2 TRANSISTOR COUNT: 100 SUBSTRATE CONNECTED TO V+ ______________________________________________________________________________________ 0.105" (2.66mm) Improved Low-Power, CMOS Analog Switches with Latches DIM D1 A A1 A2 A3 B B1 C D D1 E E1 e eA eB L E E1 D A3 A A2 L A1 INCHES MAX MIN 0.200 - - 0.015 0.150 0.125 0.080 0.055 0.022 0.016 0.065 0.050 0.012 0.008 0.765 0.745 0.030 0.005 0.325 0.300 0.280 0.240 0.100 BSC 0.300 BSC 0.400 - 0.150 0.115 15 0 MILLIMETERS MIN MAX - 5.08 0.38 - 3.18 3.81 1.40 2.03 0.41 0.56 1.27 1.65 0.20 0.30 18.92 19.43 0.13 0.76 7.62 8.26 6.10 7.11 2.54 BSC 7.62 BSC - 10.16 2.92 3.81 0 15 21-587A 16-PIN PLASTIC DUAL-IN-LINE PACKAGE C e B1 eA B eB DIM S1 S E1 E D A A B B1 C D E E1 e L L1 Q S S1 INCHES MAX MIN 0.200 - 0.023 0.014 0.065 0.038 0.015 0.008 0.840 - 0.310 0.220 0.320 0.290 0.100 BSC 0.200 0.125 - 0.150 0.060 0.015 0.080 - - 0.005 15 0 MILLIMETERS MIN MAX - 5.08 0.36 0.58 0.97 1.65 0.20 0.38 - 21.34 5.59 7.87 7.37 8.13 2.54 BSC 3.18 5.08 3.81 - 0.38 1.52 - 2.03 0.13 - 0 15 21-590B Q L L1 e B1 B C 16-PIN CERAMIC DUAL-IN-LINE PACKAGE ______________________________________________________________________________________ 11 DG421/DG423/DG425 ________________________________________________________Package Information DG421/DG423/DG425 Improved Low-Power, CMOS Analog Switches with Latches ___________________________________________Package Information (continued) DIM A2 C e B1 D1 D B D2 A A1 A2 A3 B B1 C D D1 D2 D3 e INCHES MAX MIN 0.180 0.165 0.110 0.100 0.156 0.145 - 0.020 0.021 0.013 0.032 0.026 0.011 0.009 0.395 0.385 0.355 0.350 0.330 0.290 0.200 REF 0.050 REF MILLIMETERS MIN MAX 4.19 4.57 2.54 2.79 3.68 3.96 0.51 - 0.33 0.53 0.66 0.81 0.23 0.28 9.78 10.03 8.89 9.02 7.37 8.38 5.08 REF 1.27 REF 21-981A A3 D3 A1 D1 A D 20-PIN PLASTIC LEADED CHIP CARRIER PACKAGE Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 12 __________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 (408) 737-7600 (c) 1994 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.