1. General description
The 74AUP1G3208 provides the Boolean function: Y = (A + B) ×C. The user can choose
the logic functions OR, AND and OR-AND. All inputs can be connected to V CC or GND.
Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall
times across the entire VCC range fr om 0.8 V to 3.6 V.
This device ensures a very low static and dynamic power consumption across the entire
VCC range from 0.8 V to 3.6 V.
This device is fully specified for partial power-down applications using IOFF.
The IOFF circuitry disables the outp u t, pr eve n tin g the damaging backflow current through
the device when it is powered down.
2. Features and benefits
Wide supply voltage range from 0.8 V to 3.6 V
High noise immunity
Complies with JEDEC standards:
JESD8-12 (0.8 V to 1.3 V)
JESD8-11 (0.9 V to 1.65 V)
JESD8-7 (1.2 V to 1.95 V)
JESD8-5 (1.8 V to 2.7 V)
JESD8-B (2.7 V to 3.6 V)
ESD protection:
HBM JESD22-A114F Class 3A exceeds 5000 V
MM JESD22-A115-A exce eds 20 0 V
CDM JESD22-C101E exceeds 1000 V
Low static power consumption; ICC = 0.9 μA (maximum)
Latch-up pe rform a nc e exceeds 100 mA per JESD 78 Clas s II
Inputs accept voltages up to 3.6 V
Low noise overshoot and undershoot < 10 % of VCC
IOFF circuitry provides partial Power-down mode operation
Multiple package options
Specified from 40 °Cto+85°C and 40 °Cto+125°C
74AUP1G3208
Low-power 3-input OR-AND gate
Rev. 5 — 22 June 2012 Product data sheet
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 2 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
3. Ordering information
4. Marking
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional diagram
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74AUP1G3208GW 40 °C to +125 °C SC-88 plastic surface-mounted package; 6 leads SOT363
74AUP1G3208GM 40 °C to +125 °C XSON6 plastic extremely thin small outline package; no leads;
6 terminals; body 1 ×1.45 ×0.5 mm SOT886
74AUP1G3208GF 40 °C to +125 °C XSON6 plastic extremely thin small outline package; no leads;
6 terminals; body 1 ×1×0.5 mm SOT891
74AUP1G3208GN 40 °C to +125 °C XSON6 extremely thin small outline package; no leads;
6 terminals; body 0.9 ×1.0 ×0.35 mm SOT1115
74AUP1G3208GS 40 °C to +125 °C XSON6 extremely thin small outline package; no leads;
6 terminals; body 1.0 ×1.0 ×0.35 mm SOT1202
Table 2. Marking
Type number Marking code[1]
74AUP1G3208GW a2
74AUP1G3208GM a2
74AUP1G3208GF a2
74AUP1G3208GN a2
74AUP1G3208GS a2
Fig 1. Logic symbol
001aad501
1
3
6
A
B
C4Y
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 3 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
6. Pinning information
6.1 Pinning
6.2 Pin description
7. Functional description
[1] H = HIGH voltage level; L = LOW voltage level.
Fig 2. Pin configuration SOT363 Fig 3. Pin configuration SOT886 Fi g 4. Pin configuration SOT891 ,
SOT1115 and SOT1202
74AUP1G3208
AC
GND
BY
001aad500
1
2
3
6
V
CC
5
4
74AUP1G3208
GND
001aad507
A
B
VCC
C
Y
Transparent top view
2
3
1
5
4
6
74AUP1G3208
GND
001aad506
A
B
VCC
C
Y
Transparent top view
2
3
1
5
4
6
Table 3. Pin description
Symbol Pin Description
A 1 data input A
GND 2 ground (0 V)
B 3 data input B
Y 4 data outpu t Y
VCC 5 supply voltage
C 6 data input C
Table 4. Function table[1]
Input Output
C B A Y
LLLL
LLHL
LHLL
LHHL
HLLL
HLHH
HHLH
HHHH
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 4 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
7.1 Logic configurations
8. Limiting values
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SC-88 packages: above 87.5 °C the value of Ptot derates linearly with 4.0 mW/K.
For XSON6 packages: above 118 °C the value of Ptot derates linearly with 7.8 mW/K.
Table 5. Function selec tion table
Logic function Figure
2-input AND see Figure 5 and Figure 6
2-input OR see Figure 7
3-input gate with the Boolean function: Y = (A + B) × C see Figure 8
Fig 5. 2-input AND gate Fig 6. 2-input AND gate
001aad502
1
2
3
6
5
4
B
B
CC
VCC
Y
Y
001aad503
1
2
3
6
5
4
A
A
CC
VCC
Y
Y
Fig 7. 2-input OR gate Fig 8. 3-input gate with the Boolean function:
Y=(A+B)×C
001aad504
1
2
3
6
5
4
A
A
B
BVCC
Y
Y
001aad505
1
2
3
6
5
4
A
A
B
B
C
VCC
Y
Y
C
Table 6. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
VCC supply voltage 0.5 +4.6 V
IIK input clamping current VI<0V 50 - mA
VIinput voltage [1] 0.5 +4.6 V
IOK output clamping current VO<0V 50 - mA
VOoutput voltage Active mode an d Pow e r-d ow n m ode [1] 0.5 +4.6 V
IOoutput current VO=0 VtoV
CC -±20 mA
ICC supply current - 50 mA
IGND groun d current 50 - mA
Tstg storage temperature 65 +150 °C
Ptot total power dissipation Tamb =40 °C to +125 °C[2] -250mW
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 5 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
9. Recommended operating conditions
10. Static characteristics
Table 7. Recommended operating con ditions
Symbol Parameter Conditions Min Max Unit
VCC supply voltage 0.8 3.6 V
VIinput voltage 0 3.6 V
VOoutput voltage Active mode 0 VCC V
Power-down mode; VCC =0V 0 3.6 V
Tamb ambient temperature 40 +125 °C
Δt/ΔV input transition rise and fall rate VCC = 0.8 V to 3.6 V 0 200 ns/V
Table 8. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
Tamb = 25 °C
VIH HIGH-level input voltage VCC = 0.8 V 0.70 × VCC -- V
VCC = 0.9 V to 1.95 V 0.65 × VCC -- V
VCC = 2.3 V to 2.7 V 1.6 - - V
VCC = 3.0 V to 3.6 V 2.0 - - V
VIL LOW-level input voltage VCC = 0.8 V - - 0.30 × VCC V
VCC = 0.9 V to 1.95 V - - 0.35 × VCC V
VCC = 2.3 V to 2.7 V - - 0.7 V
VCC = 3.0 V to 3.6 V - - 0.9 V
VOH HIGH-level output voltage VI = VIH or VIL
IO = 20 μA; VCC = 0.8 V to 3.6 V VCC 0.1 - - V
IO = 1.1 mA; VCC = 1.1 V 0.75 × VCC -- V
IO = 1.7 mA; VCC = 1.4 V 1.11 - - V
IO = 1.9 mA; VCC = 1.65 V 1.32 - - V
IO = 2.3 mA; VCC = 2.3 V 2.05 - - V
IO = 3.1 mA; VCC = 2.3 V 1.9 - - V
IO = 2.7 mA; VCC = 3.0 V 2.72 - - V
IO = 4.0 mA; VCC = 3.0 V 2.6 - - V
VOL LOW-level output voltage VI = VIH or VIL
IO = 20 μA; VCC = 0.8 V to 3.6 V - - 0.1 V
IO = 1.1 mA; VCC = 1.1 V - - 0.3 × VCC V
IO = 1.7 mA; VCC = 1.4 V - - 0.31 V
IO = 1.9 mA; VCC = 1.65 V - - 0.31 V
IO = 2.3 mA; VCC = 2.3 V - - 0.31 V
IO = 3.1 mA; VCC = 2.3 V - - 0.44 V
IO = 2.7 mA; VCC = 3.0 V - - 0.31 V
IO = 4.0 mA; VCC = 3.0 V - - 0.44 V
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 6 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
IIinput leakage current VI = GND to 3.6 V; VCC = 0 V to 3.6 V - - ±0.1 μA
IOFF power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V - - ±0.2 μA
ΔIOFF additional power-off
leakage current VI or VO = 0 V to 3.6 V;
VCC =0Vto0.2V --±0.2 μA
ICC supply current VI = GND or VCC; IO = 0 A;
VCC = 0.8 V to 3.6 V --0.5μA
ΔICC additional supply current VI = VCC 0.6 V; IO = 0 A;
VCC =3.3V --40μA
CIinput capacitance VCC = 0 V to 3.6 V; VI = GND or VCC -0.8-pF
COoutput capacitance VO = GND; VCC = 0 V - 1.7 - pF
Tamb = 40 °C to +85 °C
VIH HIGH-level input voltage VCC = 0.8 V 0.70 × VCC -- V
VCC = 0.9 V to 1.95 V 0.65 × VCC -- V
VCC = 2.3 V to 2.7 V 1.6 - - V
VCC = 3.0 V to 3.6 V 2.0 - - V
VIL LOW-level input voltage VCC = 0.8 V - - 0.30 × VCC V
VCC = 0.9 V to 1.95 V - - 0.35 × VCC V
VCC = 2.3 V to 2.7 V - - 0.7 V
VCC = 3.0 V to 3.6 V - - 0.9 V
VOH HIGH-level output voltage VI = VIH or VIL
IO = 20 μA; VCC = 0.8 V to 3.6 V VCC 0.1 - - V
IO = 1.1 mA; VCC = 1.1 V 0.7 × VCC -- V
IO = 1.7 mA; VCC = 1.4 V 1.03 - - V
IO = 1.9 mA; VCC = 1.65 V 1.30 - - V
IO = 2.3 mA; VCC = 2.3 V 1.97 - - V
IO = 3.1 mA; VCC = 2.3 V 1.85 - - V
IO = 2.7 mA; VCC = 3.0 V 2.67 - - V
IO = 4.0 mA; VCC = 3.0 V 2.55 - - V
VOL LOW-level output voltage VI = VIH or VIL
IO = 20 μA; VCC = 0.8 V to 3.6 V - - 0.1 V
IO = 1.1 mA; VCC = 1.1 V - - 0.3 × VCC V
IO = 1.7 mA; VCC = 1.4 V - - 0.37 V
IO = 1.9 mA; VCC = 1.65 V - - 0.35 V
IO = 2.3 mA; VCC = 2.3 V - - 0.33 V
IO = 3.1 mA; VCC = 2.3 V - - 0.45 V
IO = 2.7 mA; VCC = 3.0 V - - 0.33 V
IO = 4.0 mA; VCC = 3.0 V - - 0.45 V
IIinput leakage current VI = GND to 3.6 V; VCC = 0 V to 3.6 V - - ±0.5 μA
IOFF power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V - - ±0.5 μA
ΔIOFF additional power-off
leakage current VI or VO = 0 V to 3.6 V;
VCC =0Vto0.2V --±0.6 μA
Table 8. Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 7 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
ICC supply current VI = GND or VCC; IO = 0 A;
VCC = 0.8 V to 3.6 V --0.9μA
ΔICC additional supply current VI = VCC 0.6 V; IO = 0 A;
VCC =3.3V --50μA
Tamb = 40 °C to +125 °C
VIH HIGH-level input voltage VCC = 0.8 V 0.75 × VCC -- V
VCC = 0.9 V to 1.95 V 0.70 × VCC -- V
VCC = 2.3 V to 2.7 V 1.6 - - V
VCC = 3.0 V to 3.6 V 2.0 - - V
VIL LOW-level input voltage VCC = 0.8 V - - 0.25 × VCC V
VCC = 0.9 V to 1.95 V - - 0.30 × VCC V
VCC = 2.3 V to 2.7 V - - 0.7 V
VCC = 3.0 V to 3.6 V - - 0.9 V
VOH HIGH-level output voltage VI = VIH or VIL
IO = 20 μA; VCC = 0.8 V to 3.6 V VCC 0.11 - - V
IO = 1.1 mA; VCC = 1.1 V 0.6 × VCC -- V
IO = 1.7 mA; VCC = 1.4 V 0.93 - - V
IO = 1.9 mA; VCC = 1.65 V 1.17 - - V
IO = 2.3 mA; VCC = 2.3 V 1.77 - - V
IO = 3.1 mA; VCC = 2.3 V 1.67 - - V
IO = 2.7 mA; VCC = 3.0 V 2.40 - - V
IO = 4.0 mA; VCC = 3.0 V 2.30 - - V
VOL LOW-level output voltage VI = VIH or VIL
IO = 20 μA; VCC = 0.8 V to 3.6 V - - 0.11 V
IO = 1.1 mA; VCC = 1.1 V - - 0.33 × VCC V
IO = 1.7 mA; VCC = 1.4 V - - 0.41 V
IO = 1.9 mA; VCC = 1.65 V - - 0.39 V
IO = 2.3 mA; VCC = 2.3 V - - 0.36 V
IO = 3.1 mA; VCC = 2.3 V - - 0.50 V
IO = 2.7 mA; VCC = 3.0 V - - 0.36 V
IO = 4.0 mA; VCC = 3.0 V - - 0.50 V
IIinput leakage current VI = GND to 3.6 V; VCC = 0 V to 3.6 V - - ±0.75 μA
IOFF power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V - - ±0.75 μA
ΔIOFF additional power-off
leakage current VI or VO = 0 V to 3.6 V;
VCC =0Vto0.2V --±0.75 μA
ICC supply current VI = GND or VCC; IO = 0 A;
VCC = 0.8 V to 3.6 V --1.4μA
ΔICC additional supply current VI = VCC 0.6 V; IO = 0 A;
VCC =3.3V --75μA
Table 8. Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 8 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
11. Dynamic characteristics
Table 9. Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 10.
Symbol Parameter Conditions 25 °C40 °C to +125 °CUnit
Min Typ[1] Max Min Max
(85 °C) Max
(125 °C)
CL = 5 pF
tpd propagation delay A, B or C to Y; see Figure 9 [2]
VCC = 0.8 V - 18.5 - - - - ns
VCC = 1.1 V to 1.3 V 2.2 5.4 10.6 2.2 10.9 11.1 ns
VCC = 1.4 V to 1.6 V 1.9 3.8 6.4 1.8 6.9 7.2 ns
VCC = 1.65 V to 1.95 V 1.5 3.1 5.1 1.4 5.6 5.9 ns
VCC = 2.3 V to 2.7 V 1.3 2.4 3.7 1.2 4.1 4.4 ns
VCC = 3.0 V to 3.6 V 1.2 2.2 3.2 1.1 3.4 3.6 ns
CL = 10 pF
tpd propagation delay A, B or C to Y; see Figure 9 [2]
VCC = 0.8 V - 22.1 - ns
VCC = 1.1 V to 1.3 V 2.6 6.3 12.4 2.5 12.8 13.1 ns
VCC = 1.4 V to 1.6 V 2.3 4.4 7.4 2.1 8.0 8.4 ns
VCC = 1.65 V to 1.95 V 2.0 3.6 5.9 1.8 6.4 6.8 ns
VCC = 2.3 V to 2.7 V 1.7 3.0 4.4 1.6 4.8 5.1 ns
VCC = 3.0 V to 3.6 V 1.6 2.7 3.9 1.4 4.2 4.4 ns
CL = 15 pF
tpd propagation delay A, B or C to Y; see Figure 9 [2]
VCC = 0.8 V - 25.6 - - - - ns
VCC = 1.1 V to 1.3 V 3.0 7.1 14.1 2.8 14.6 14.9 ns
VCC = 1.4 V to 1.6 V 2.6 5.0 8.4 2.4 9.1 9.5 ns
VCC = 1.65 V to 1.95 V 2.2 4.1 6.7 2.1 7.4 7.8 ns
VCC = 2.3 V to 2.7 V 2.0 3.4 5.0 1.9 5.5 5.9 ns
VCC = 3.0 V to 3.6 V 1.9 3.2 4.5 1.7 4.8 5.0 ns
CL = 30 pF
tpd propagation delay A, B or C to Y; see Figure 9 [2]
VCC = 0.8 V - 34.1 - - - - ns
VCC = 1.1 V to 1.3 V 3.9 9.3 18.9 3.7 19.7 20.1 ns
VCC = 1.4 V to 1.6 V 3.4 6.5 11.0 3.2 12.1 12.7 ns
VCC = 1.65 V to 1.95 V 3.0 5.4 8.9 2.9 9.7 10.3 ns
VCC = 2.3 V to 2.7 V 2.8 4.5 6.5 2.6 7.1 7.5 ns
VCC = 3.0 V to 3.6 V 2.6 4.3 5.8 2.4 6.4 6.7 ns
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 9 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
[1] All typical values are measured at nominal VCC.
[2] tpd is the same as tPLH and tPHL.
[3] All specified values are the average typical values over all stated loads.
[4] CPD is used to determine the dynamic power dissipation (PD in μW).
PD=C
PD ×VCC2×fi×N+Σ(CL×VCC2×fo) where:
fi= input frequency in MHz;
fo= output frequency in MHz;
CL= output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
Σ(CL×VCC2×fo) = sum of the outputs.
12. Waveforms
CL = 5 pF, 10 pF, 15 pF and 30 pF
CPD power dissipation
capacitance fi = 1 MHz; VI= GND to VCC [3][4]
VCC = 0.8 V - 2.6 - - - - pF
VCC = 1.1 V to 1.3 V - 2.7 - - - - pF
VCC = 1.4 V to 1.6 V - 2.8 - - - - pF
VCC = 1.65 V to 1.95 V - 3.0 - - - - pF
VCC = 2.3 V to 2.7 V - 3.5 - - - - pF
VCC = 3.0 V to 3.6 V - 4.0 - - - - pF
Table 9. Dynamic characteristics …continued
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 10.
Symbol Parameter Conditions 25 °C40 °C to +125 °CUnit
Min Typ[1] Max Min Max
(85 °C) Max
(125 °C)
Measurement points are given in Table 10.
VOL and VOH are typical output voltage levels that occur with the output load.
Fig 9. Input A, B and C to output Y propagation delay times
Y output
A, B, C input
Y output
GND
VI
VOH
VOH
VOL
VOL
VMVM
VMVM
VMVM
tPLH
tPLH
tPHL
tPHL
001aab593
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 10 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
[1] For measuring enable and disable times RL = 5 kΩ, for measuring propagation delays, setup and hold times and pulse width RL = 1 MΩ.
Table 10. Measurement points
Supply voltage Output Input
VCC VMVMVItr = tf
0.8 V to 3.6 V 0.5 × VCC 0.5 × VCC VCC 3.0 ns
Test data is given in Table 11.
Definitions for test circuit:
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.
VEXT = External voltage for measuring switching times.
Fig 10. Test circuit for measuring switching times
Table 11. Test data
Supply voltage Load VEXT
VCC CLRL[1] tPLH, tPHL tPZH, tPHZ tPZL, tPLZ
0.8 V to 3.6 V 5 pF, 10 pF, 15 pF and 30 pF 5 kΩ or 1 MΩopen GND 2 × VCC
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 11 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
13. Package outline
Fig 11. Package outline SOT363 (SC-88)
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
SOT363 SC-88
wBM
bp
D
e1
e
pin 1
index A
A1
Lp
Q
detail X
HE
E
vMA
AB
y
0 1 2 mm
scale
c
X
132
456
Plastic surface-mounted package; 6 leads SOT363
UNIT A1
max bpcDEe1HELpQywv
mm 0.1 0.30
0.20 2.2
1.8
0.25
0.10 1.35
1.15 0.65
e
1.3 2.2
2.0 0.2 0.10.2
DIMENSIONS (mm are the original dimensions)
0.45
0.15 0.25
0.15
A
1.1
0.8
04-11-08
06-03-16
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 12 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
Fig 12. Package outline SOT886 (XSON6)
References
Outline
version European
projection Issue date
IEC JEDEC JEITA
SOT886 MO-252
sot886_po
04-07-22
12-01-05
Unit
mm max
nom
min
0.5 0.04 1.50
1.45
1.40
1.05
1.00
0.95
0.35
0.30
0.27
0.40
0.35
0.32
0.6
A(1)
Dimensions (mm are the original dimensions)
Notes
1. Including plating thickness.
2. Can be visible in some manufacturing processes.
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm SOT886
A1b
0.25
0.20
0.17
DEee
1
0.5
LL
1
terminal 1
index area
D
E
e1
e
A1
b
L
L1
e1
0 1 2 mm
scale
1
6
2
5
3
4
6x
(2)
4x
(2)
A
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 13 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
Fig 13. Package outline SOT891 (XSON6)
terminal 1
index area
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
SOT891
SOT891
05-04-06
07-05-15
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1 x 0.5 mm
D
E
e1
e
A1
b
L
L1
e1
0 1 2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
mm 0.20
0.12 1.05
0.95 0.35
0.27
A1
max b E
1.05
0.95
Dee
1L
0.40
0.32
L1
0.350.55
A
max
0.5 0.04
1
6
2
5
3
4
A
6×
(1)
4×
(1)
Note
1. Can be visible in some manufacturing processes.
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 14 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
Fig 14. Package outline SOT1115 (XSON6)
References
Outline
version European
projection Issue date
IEC JEDEC JEITA
SOT1115
sot1115_po
10-04-02
10-04-07
Unit
mm max
nom
min
0.35 0.04 0.95
0.90
0.85
1.05
1.00
0.95 0.55 0.3 0.40
0.35
0.32
A(1)
Dimensions
Note
1. Including plating thickness.
2. Visible depending upon used manufacturing technology.
XSON6: extremely thin small outline package; no leads;
6 terminals; body 0.9 x 1.0 x 0.35 mm SOT1115
A1b
0.20
0.15
0.12
DEee
1L
0.35
0.30
0.27
L1
0 0.5 1 mm
scale
terminal 1
index area
D
E
(4×)(2)
e1e1
e
L
L1
b
321
6 5 4
(6×)(2) A1A
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 15 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
Fig 15. Package outline SOT1202 (XSON6)
References
Outline
version European
projection Issue date
IEC JEDEC JEITA
SOT1202
sot1202_po
10-04-02
10-04-06
Unit
mm max
nom
min
0.35 0.04 1.05
1.00
0.95
1.05
1.00
0.95 0.55 0.35 0.40
0.35
0.32
A(1)
Dimensions
Note
1. Including plating thickness.
2. Visible depending upon used manufacturing technology.
XSON6: extremely thin small outline package; no leads;
6 terminals; body 1.0 x 1.0 x 0.35 mm SOT1202
A1b
0.20
0.15
0.12
DEee
1L
0.35
0.30
0.27
L1
0 0.5 1 mm
scale
terminal 1
index area
D
E
(4×)(2)
e1e1
e
L
b
123
L1
6 5 4
(6×)(2)
A
A1
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 16 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
14. Abbreviations
15. Revision history
Table 12. Abbreviations
Acronym Description
CDM Charged Device Mo del
DUT Device Under Test
ESD ElectroStatic Discharge
HBM Human Body Model
MM Machine Model
Table 13. Revision history
Document ID Release date Data sheet status Change notice Supersedes
74AUP1G3208 v.5 20120622 Product data sheet - 74AUP1G3208 v.4
Modifications: Package outline drawing of SOT886 (Figure 12) modified.
74AUP1G3208 v.4 20111123 Product data sheet - 74AUP1G3208 v.3
Modifications: Legal pages updated.
74AUP1G3208 v.3 20101011 P roduct data sheet - 74AUP1G3208 v.2
74AUP1G3208 v.2 20090703 Product data sheet - 74AUP1G3208 v.1
74AUP1G3208 v.1 20061129 Product data sheet - -
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 17 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
16. Legal information
16.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of de vice(s) descr ibed in th is docume nt may have cha nged since this docume nt was publis hed and ma y dif fer in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
16.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liab ility for the consequences of
use of such information.
Short data sheet — A short dat a sheet is an extract from a full data sheet
with the same product type number(s) and tit le. A short data sh eet is intended
for quick reference only and shou ld not be rel ied u pon to cont ain det ailed and
full information. For detailed and full informatio n see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall pre vail.
Product specificat ionThe information and data provided in a Product
data sheet shall define the specification of the product as agr eed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to off er functions and qualities beyond those described in the
Product data sheet.
16.3 Disclaimers
Limited warr a nty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Se miconductors takes no
responsibility for the content in this document if provided by an inf ormation
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequ ential damages (including - wit hout limitatio n - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liabili ty towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all informa tion supplied prior
to the publication hereof .
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors pro duct can reasonably be expected
to result in perso nal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconducto rs products in such equipment or
applications and ther efore such inclu sion and/or use is at the cu stomer’s own
risk.
Applications — Applications that are described herein for any of these
products are for il lustrative purposes only. NXP Semiconductors makes no
representation or warranty tha t such application s will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and ope ration of their applications
and products using NXP Semiconductors product s, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suit able and fit for the custome r’s applications and
products planned, as well as fo r the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with t heir
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessa ry
testing for th e customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by cust omer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanent ly and irreversibly affect
the quality and reliability of the device.
Te rms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individua l agreement. In case an individual
agreement is concluded only the ter ms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by cust omer.
No offer to sell or license — Not hing in this document may be interpret ed or
construed as an of fer t o sell product s that is open for accept ance or t he grant,
conveyance or implication of any license under any copyri ghts, paten ts or
other industrial or intellectual property right s.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the obj ective specification for product development.
Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.
Product [short] dat a sheet Production This document contains the product specification.
74AUP1G3208 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 22 June 2012 18 of 19
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for aut omo tive use. It i s neit her qua lif ied nor test ed
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applicati ons.
In the event that customer uses the product for design-in and use in
automotive applications to automot ive specifications and standard s, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever cust omer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims result ing from customer design an d
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
16.4 Trademarks
Notice: All refe renced brands, produc t names, service names and trademarks
are the property of their respect i ve ow ners.
17. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
NXP Semiconductors 74AUP1G3208
Low-power 3-input OR-AND gate
© NXP B.V. 2012. All rights reserved.
For more information, please visit: http://www.nxp.co m
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 22 June 2012
Document identifier: 74AUP1G3208
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
18. Contents
1 General description. . . . . . . . . . . . . . . . . . . . . . 1
2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
6 Pinning information. . . . . . . . . . . . . . . . . . . . . . 3
6.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
6.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3
7 Functional description . . . . . . . . . . . . . . . . . . . 3
7.1 Logic configurations . . . . . . . . . . . . . . . . . . . . . 4
8 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4
9 Recommended operating conditions. . . . . . . . 5
10 Static characteristics. . . . . . . . . . . . . . . . . . . . . 5
11 Dynamic characteristics . . . . . . . . . . . . . . . . . . 8
12 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
13 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 11
14 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . 16
15 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 16
16 Legal information. . . . . . . . . . . . . . . . . . . . . . . 17
16.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 17
16.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
16.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
16.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
17 Contact information. . . . . . . . . . . . . . . . . . . . . 18
18 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19