MCC TM Micro Commercial Components Features * * * * * * * 1N5817G THRU 1N5819G omponents 20736 Marilla Street Chatsworth !"# $ % !"# Metal silicon junction, majority carrier conduction For surface mount application Low power loss, high efficiency High current capability, low forward voltage drop. High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications. High temperature soldering guaranteed: 250C/10 seconds at terminals 1.0 Amp Schottky Barrier Rectifier 20 to 40 Volts DO-41G Maximum Ratings * * * * Case: Molded Glass Body Operating Temperature: -55C to +150C Storage Temperature: -55C to +150C Typical Thermal Resistance; 30C/W Junction To Lead 75C/W Junction To Ambient MCC Part Number 1N5817G 1N5818G 1N5819G Maximum Recurrent Peak Reverse Voltage 20V 30V 40V Maximum RMS Voltage Maximum DC Blocking Voltage 14V 21V 28V 20V 30V 40V D A Cathode Mark B D Electrical Characteristics @ 25C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance *Pulse test: Pulse width 300 Revision: 3 IF(AV) 1.0A TA = 25C* C IFSM 30A 8.3ms, half sine VF 0.5V IFM = 1.0A; TJ = 25C* DIMENSIONS INCHES MM DIM IR CJ 1.0mA 10mA 110pF TJ = 25C TJ = 125C Measured at 1.0MHz, VR=4.0V sec, Duty cycle 1% NOTE MIN MAX MIN MAX A 0.166 0.205 4.10 7.60 B 0.080 0.107 2.00 3.60 Diameter C 0.026 0.034 0.70 0.90 Diameter D 1.000 ----- 25.40 ----- www.mccsemi.com 2002/12/31 MCC 1N5817G thru 1N5819G TM Micro Commercial Components FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT P.C.B.mounted on 0.24 X 0.24"(6.0 X 6.0mm) copper pad areasH RESISTIVE OR INDUCTIVE LOAD At rated TL 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE LEAD TEMPERATURE ( C) NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT MILL (AMPERES) INSTANTANEOUS FORWARD CURRENT( AMPERES) TJ =125C PULSE WIDTH=300 S 1% DUTY CYCLE TJ =25C TJ=75 C TJ=25 C INSTANTANEOUS FORWARD VOLTAGE (VOLTS) TJ=125 C PERCENT OF RATED PEAK REVERSE VOLTAGE% JU NCTION CAPACITANCE(pF) FIG.5-TYPICAL JUNCTION CAPACITANCE TJ=25 C f=1.0MHZ Vsig=50mVp-p REVERSE VOLTAGE. VOLTS Revision: 3 www.mccsemi.com 2002/12/31