-49-
H HiTRON
UNIVERSAL INPUT HARMONIC CORRECTION AC-DC
OPEN FRAME SINGLE & MULTIPLE OUTPUT 100 WATTS
INTERNAL SWITCHING POWER SUPPLIES HVP101 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES
PCB VERSION FORMAT
MEET IEC1000-3-2 HARMONIC CORRECTION
MEET UNIVERSAL SAFETY STANDARDS
EMI MEET CISPR PUB. 22 & FCC CLASS B
CE MARKING COMPLIANCE
GENERAL SPECIFICATION
Efficiency: Typ. 75-80%.
Switching Frequency: PFC ckt. 75K Hz.
PWM ckt. 170-180K Hz.
Circuit Topology: Fixed frequency forward circuit.
Transient Response: Output voltage returns in
less than 0.3mS following
a 25% load change.
Safety Standard: IEC950/UL1950 Class I.
Operating Temperature: 0 to +50°C under forced air
flow for full load.
Storage Temperature: -20 to +85°C.
Temperature Coefficient: 0.04% /°C.
Cooling: At least 30 cfm direct forward air flow is
required to achieve full rating power.
Construction: PCB format.
Power Density: 5.6 Watts / Cubic Inch.
In application
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: Typ. 90-264Vac with PFC.
Input Connector: V-M connector & GND tag.
Input Frequency: 47-63Hz.
Inrush Current: Typ. 29A@230Vac.
Input Current: Typ. 1.3A @115Vac, 0.65A @230Vac.
Dielectric Withstand: Meet IEC950.
EMI: Meet CISPR EN55022 B & FCC Class B.
Hold-up Time: Typ. 18-25mS @ 115Vac & 230Vac.
Power Factor & Harmonic Correction:
Meet IEC1000-3-2, PF typ. 0.97-0.99 @ full load.
Power OK: Installed in VO1 & VO2.
Over Temperature Protection (OTP): By NTC at quad
output only.
Earth Leakage: Less than 0.75mA @230Vac.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Connector: V-M connector.
Output Wattage: Typ. 100 Watts.
Line Regulation: Typ. 0.1%.
Load Regulation: Main VO1 typ. ±1-2%.
Aux. VO2 typ. ±1-2% (Magnetic Amp.).
Aux. VO3 typ. ±1-2% (Magnetic Amp.).
Aux. VO4 typ. ±2-3% (P.R.).
Noise & Ripple: Typ. 1% peak to peak.
OVP: Built-in at main VO1 & Aux.VO2 & VO3 (latch).
Remote Sensing: Available at VO1 & VO2.
Adjustability: Available at VO1,VO2 & VO3.
Over Current Protection: Built-in at all output.
Overload Protection (OLP): Fully protected against
output overload and short circuit at any output.
Consult the factory for OLP setting.
-50-
OUTPUT VOLTAGE / CURRENT RATINGS CHART
MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 368.0g(12.97 Oz.)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENTS
AC INPUT SINGLE OUTPUT DUAL OUTPUT QUAD OUTPUT
ASSIGNMENT L N GND VO1 DC
COM +VO1# P.OK VO1 VO2 DC
COM +VO1 # +VO2 # P.OK VO1 DC
COM VO2 VO3 VO4 VO1+ # VO2+ # VO1,2- # P. O K
CONNECTOR
& PIN # P1-3 P1-1 Tab P2-6,7,8,
9,10,11
P2-1,2,
3,4,5 P2-13 P2-14
P2-9,
10,11
P2-6,
7,8
P2-1,2,
3,4 P2-13 P2-12 P2-14
P2-1,2,
3,4
P2-5,6
7,8 P2-9,10 P2-11 P2-12 P3-3 P3-4 P3-1 P3-2
Mating connector: Molex 5195 or 5239 series.
DUAL OUTPUT (Under forced air flow)
MAIN VO1 ★@# AUX. VO2 ▲#
MODEL NO. Typ. Volt. Typ. Volt.
HVP101-D050E 12.0A +5.0V 6.0A +5.0V
HVP101-D050I 12.0A +5.0V 4.0A +12.0V
HVP101-D050K 12.0A +5.0V 3.0A +15.0V
HVP101-D050D 12.0A +5.0V 8.0A +3.3V
HVP101-D033I 15.0A +3.3V 4.0A +12.0V
HVP101-D033K 15.0A +3.3V 3.0A +15.0V
SINGLE OUTPUT (Under forced air flow)
MAIN VO1 ★@#
MODEL NO. Typ. Volt. Peak
HVP101-S033200 20.0A 3.3V 25.0A
HVP101-S050160 16.0A 5.0V 20.0A
HVP101-S120085 8.5A 12.0V 9.0A
HVP101-S150068 6.8A 15.0V 7.0A
HVP101-S240042 4.2A 24.0V 6.0A
HVP101-S280036 3.6A 28.0V 5.0A
HVP101-S360028 2.8A 36.0V 4.0A
HVP101-S480021 2.1A 48.0V 3.0A
QUAD OUTPUT (Under forced air flow)
MAIN VO1 ★@# AUX. VO2 ★@▲# AUX. VO3 ★@▲ AUX. VO4 ●
MODEL NO. Typ. Volt Typ. Volt Typ. Volt Typ. Volt
HVP101-Q050DII 12.0A +5.0V 6.0A + 3.3V 1.5A +12V 0.5A -12V
HVP101-Q050DIE 12.0A +5.0V 7.0A + 3.3V 1.5A +12V 0.5A - 5V
HVP101-Q050MII 10.0A +5.0V 1.5A +24.0V 1.5A +12V 0.2A -12V
HVP101-Q050KIE 10.0A +5.0V 2.5A +15.0V 1.5A +12V 0.4A - 5V
HVP101-Q050KII 8.0A +5.0V 2.5A +15.0V 2.0A +12V 0.2A -12V
Symbol: "★" OVP built-in. "@" Adjustable. "#" Remote sense. "●" Installed with Post Regulator. "▲" Installed with magnetic amplifier.
Remark: Peak output, less than 60 Sec. with 10% duty cycle.