1000 Base-T Applications Gang 1X4, Through Hole, Tab Down Zigzag Output Pins Pattern E & E Magnetic Products Limited Magnetic Integrated Connector Modules Compliant with IEEE802.3 standard including 350H OCL with 8mA DC Bias 1500Vrms isolation voltage per IEEE802.3 Enhanced performance on EMI suppression with metal shield Support 4 pairs fo Category 5 UTP cable with 1000Base-T full duplex applications Gang 1x4 design for Hub and Switch Applications Operating temperature 0oC to +70oC UL 1863 listed RoHS compliant versions are available GENERAL ELECTRICAL SPECIFICATION Insertion Loss (dB Max) Return Loss (dB Min) 1 @ 25C CMRR (dB Min) Crosstalk (dB Min) 1 0.1-100MHz 100-125MHz 0.5-40MHz 40-100MHz 0.1-100MHz 0.1-100MHz 1.0 1.2 18.0 12-20Log(F/80) 32.0 33-20Log(F/50) Hipot (Vrms) 1500 PART NUMBER TABLE 4 RoHS Part Number Turn Ratio ( 3%) (Chip : Cable) Configuration 3 LED (Left / Right) Mechanical Package Schematic MJ-14D2GYA0-G101 MJR14D2GYA0-G101 1CT:1CT TC G/Y MJ14D-03B G101 MJ-14D2GYA0-G114 MJR14D2GYA0-G114 1CT:1CT TC G/Y MJ14D-03B G114 MJ-14D2GYA1-G101 MJR14D2GYA1-G101 1CT:1CT TC G/Y MJ14D-03A G101 MJ-14D2GYA1-G114 MJR14D2GYA1-G114 1CT:1CT TC G/Y MJ14D-03A G114 MJ-14D2NNA0-G101 MJR14D2NNA0-G101 1CT:1CT TC -- MJ14D-03C G101 MJ-14D2NNA0-G114 MJR14D2NNA0-G114 1CT:1CT TC -- MJ14D-03C G114 Part Number 2 Notes: 1. "F" represents the test frequency specified in MHz. 2. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited. 3. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; 4. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow ; "--" = None. For different LED color requirements, please contact E&E Magnetic Products Limited. 5. Panel tabs are optional. 6. All parts shown in this datasheet have gold plating thickness of 10 micro-inch (min.) over contact area. Advance options including 30 micro-inch (min.) and 50 micro-inch (min.) are also available. MATERIALS Housing Contact Pins PCB Pins Consist of thermoset & thermoplastic materials, all of them are UL 94-V0 rated. 6 Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-202, method 208. 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 1 Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ104(05) Revised in 06/07 1000 Base-T Applications Gang 1X4, Through Hole, Tab Down Zigzag Output Pins Pattern E & E Magnetic Products Limited MECHANICAL DIMENSIONS MJ14D-03A (E&E PART NUMBER) C (DATE) RU R US NOTE 5 2.340 59.44 MAX. J1 0.855 MAX. 21.72 J8 0.555 14.10 MAX. REFERENCE OR GAUGE PLANE 0.125 3.18 0.425 10.80 PORT 1 PORT 4 LED (LEFT) LED (RIGHT) 2.100 53.34 0.550 13.97 0.450 11.43 0.100 2.54 0.050 1.27 0.100 2.54 0.050 1.27 Chip side 56X DIA. 0.042 1.07 0.250 6.35 1 3 2 0.062 2X DIA. 1.57 0.126 2X DIA. 3.20 5 4 7 6 0.120 3.05 9 8 10 PORT 1 12 11 0.113 2.87 PORT 2 PORT 3 PORT 4 0.193 4.90 14 13 0.029 0.74 Cable side 0.100 2.54 0.100 2.54 0.408 10.36 0.550 13.97 2.320 58.93 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm 0.010 . Unless otherwise specified, all tolerances are 0.25 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 2 Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ104(05) Revised in 06/07 1000 Base-T Applications Gang 1X4, Through Hole, Tab Down Zigzag Output Pins Pattern E & E Magnetic Products Limited MECHANICAL DIMENSIONS MJ14D-03B (E&E PART NUMBER) C (DATE) RU R US NOTE 5 2.340 59.44 MAX. J1 0.855 MAX. 21.72 J8 0.555 14.10 MAX. REFERENCE OR GAUGE PLANE 0.125 3.18 0.425 10.80 PORT 1 PORT 4 LED (LEFT) LED (RIGHT) 2.100 53.34 0.550 13.97 0.450 11.43 0.100 2.54 0.050 1.27 Chip side 56X DIA. 0.042 1.07 0.100 2.54 0.050 1.27 0.250 6.35 1 3 2 0.062 2X DIA. 1.57 0.126 2X DIA. 3.20 5 4 7 6 0.120 3.05 9 8 0.090 2.29 10 PORT 1 PORT 2 PORT 3 PORT 4 0.160 4.06 11 12 13 14 0.030 0.76 0.100 2.54 Cable side 0.410 10.41 0.510 12.95 0.550 13.97 2.320 58.93 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm 0.010 . Unless otherwise specified, all tolerances are 0.25 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 3 Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ104(05) Revised in 06/07 1000 Base-T Applications Gang 1X4, Through Hole, Tab Down Zigzag Output Pins Pattern E & E Magnetic Products Limited MECHANICAL DIMENSIONS MJ14D-03C (E&E PART NUMBER) C (DATE) RU R US NOTE 5 2.340 59.44 MAX. J1 0.855 MAX. 21.72 J8 0.555 14.10 MAX. REFERENCE OR GAUGE PLANE 0.125 3.18 0.425 10.80 PORT 1 PORT 4 2.100 53.34 0.550 13.97 0.450 11.43 0.100 2.54 0.050 1.27 Chip side 56X DIA. 0.042 1.07 0.100 2.54 0.050 1.27 0.250 6.35 1 3 2 0.062 2X DIA. 1.57 0.126 2X DIA. 3.20 Cable side 5 4 7 6 PORT 1 0.120 3.05 9 8 10 PORT 2 PORT 3 PORT 4 2.320 58.93 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm 0.010 . Unless otherwise specified, all tolerances are 0.25 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 4 Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ104(05) Revised in 06/07 1000 Base-T Applications Gang 1X4, Through Hole, Tab Down Zigzag Output Pins Pattern E & E Magnetic Products Limited SCHEMATICS Shield G101 1000pF/2000V Primary Secondary 1CT:1CT 10 J8 75 0.1uF MDI_3- 9 J7 MDI_3+ 8 1CT:1CT 0.1uF MDI_1- 7 J6 75 J5 MDI_2- 6 1CT:1CT MDI_2+ 5 0.1uF J4 75 MDI_1+ 4 J3 MDI_0- 3 1CT:1CT MDI_0+ 2 J2 75 0.1uF J1 1 RJ-45 Chip Side RJ-45 Cable Side G114 Shield Primary Secondary 1000pF/2000V MDI_3- 10 1CT:1CT MDI_3+ 9 J8 75 J7 MDI_2- 8 1CT:1CT MDI_2+ 7 J6 75 J5 6 5 J4 1CT:1CT MDI_1- 4 75 J3 MDI_1+ 3 J2 1CT:1CT MDI_0- 2 75 J1 MDI_0+ 1 RJ-45 Cable Side RJ-45 Chip Side LED SPECIFICATION @25C, FORWARD CURRENT = 20mA Standard Color Typical Wavelength (nm) Green Yellow Forward Voltage (volt) Typical Maximum 565 2.2 2.5 590 2.1 2.5 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 5 Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ104(05) Revised in 06/07 1000 Base-T Applications Gang 1X4, Through Hole, Tab Down Zigzag Output Pins Pattern E & E Magnetic Products Limited LEDS COLOR AND POLARITY MJ14D-03A LED (LEFT) COLOR 14 LED (RIGHT) LED (RIGHT) POLARITY PIN 11 PIN 12 COLOR POLARITY PIN 14 PIN 13 13 12 GREEN LED (LEFT) YELLOW 11 LEDS COLOR AND POLARITY MJ14D-03B LED (LEFT) 14 COLOR LED (RIGHT) LED (RIGHT) POLARITY PIN 11 PIN 12 COLOR POLARITY PIN 13 PIN 14 13 12 GREEN YELLOW LED (LEFT) 11 FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER 2/F Block A, Merit Industrial Centre, 94 Tokwawan Road, Kowloon, Hong Kong Tel: (852) 2765 3888 Fax: (852) 2954 3304 Email: eempl@eleceltek.com Website: http://www.eleceltek.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 2006, E & E Magnetic Products Limited. 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 6 Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ104(05) Revised in 06/07