TL-T2E15 - Omron Automation and Safety

Slim Rectangular Inductive Prox TL-T

Miniature, Slim-styled Type Proximity

HSpace-saving prox ideal for timing cam

and dog detection

HFour mounting holes provided: two from

the side and two from the rear of the

housing

HGanged mounting possible for multiple

pulse generation

HAlternate frequency models available to

avoid mutual interference

Orderin

Information

Part number

Type Sensing DC 3-wire switching type AC switching type

Distance NPN-NO NPN-NC PNP-NO PNP-NC SCR-NO SCR-NC

Shielded 2 mm (0.08 in) TL-T2E1 TL-T2E2 TL-T2F1 TL-T2F2 TL-T2Y1 TL-T2Y2

Unshielded 5 mm (0.20 in) TL-T5ME1 TL-T5ME2 TL-T5MF1 TL-T5MF2 TL-T5MY1 TL-T5MY2

Note: 1. To avoid mutual interference, this sensor can be ordered with a different oscillating frequency. Add a “5” to the end of the part

number (e.g. TL-N2E15).

2. Add suffix “G” to the model number when placing your order for European models with color-coded cables conforming to

CENELEC standard (EN50044). Refer to the color code table in the “Output Stage Circuit Diagram” for the cable color codes

of the European models.

TL-TTL-T

Specifications

JRATINGS/CHARACTERISTICS

Part number TL-T2E1, TL-T2E2,

TL-T2F1, TL-T2F2

TL-T2Y1, TL-T2Y2 TL-T5ME1, TL-T5ME2,

TL-T5MF1, TL-T5MF2

TL-T5MY1, TL-T5MY2

Supply voltage (operating voltage range) E and F models: 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 20% max.

Y models: 100 to 220 VAC (90 to 250 VAC), 50/60 Hz

Current consumption E and F models: 15 mA max. at 24 VDC

Leakage current Y models: 2.5 mA max. at 200 VAC

Sensing object Magnetic metal (The sensing distance decreases with non-magnetic metal.)

Sensing distance 2mm±10% (0.08 ±10%) 5mm±10% (0.19 ±10%)

Sensing distance (standard object) 0 to 1.6 mm (iron, 12 x 12 x 1 mm)

0 to 0.06 in (iron 0.47, 47 x 0.04 in)

0to4mm(iron,15x15x1mm)

0to0.157in(iron0.59x0.59x0.39in)

Differential travel 10% max. of sensing distance

Response frequency E and F models: 800 Hz,

Y models: 20 Hz

E and F models: 250 Hz,

Y models: 20 Hz

Operating status (with sensing object

approaching)

E1 models: L output signal with load ON

E2 models: H output signal with load OFF

F1 models: H output signal with load ON

Y1 models: Load ON

Y2 models: Load OFF

Control output Type E1: NPN-NO Y1: SCR-NO

E2: NPN-NC Y2: SCR-NC

F1: PNP-NO

F2: PNP-NC

Switching

capacity

E and F models: 100 mA max. at 12 VDC and 200 mA max. at 24 VDC

Y models: 10 to 200 mA

Circuit protection E and F models: Reverse connection protection and surge absorber

Y models: Surge absorber

Indicator Operation indicator (red LED)

Ambient temperature Operating -- 2 5 °Cto70°C(--13°F to 158°F)withnoicing

Ambient humidity Operating 35% to 95%

Temperature influence ±10% max. of sensing distance at 23°C (73.4°F) in the temperature range of

-- 2 5 °Cto70°C(--13°F to 158°F)

Voltage influence E and F models: ±2.5% max. of sensing distance within a range of ±15% of the rated power

supply voltage

Y models: ±2.5% max. of sensing distance within a range of ±10% of the rated power supply

voltage

Residual voltage E and F models: 1.0 V max. with a load current of 100 mA and a cord length of 2 m

Y models: Refer to Residual Load Voltage (Typical) on page 4.

Insulation resistance 50 MΩmin. (at 500 VDC) between case and current carry parts

Dielectric strength DC switching models: 1,000 VAC, 50/60 Hz for 1 min between case and current carry

parts

AC switching models: 2,000 VAC, 50/60 Hz for 1 min between case and current carry

parts

Vibration resistance 10 to 55 Hz, 1.5-mm (0.06 in)double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance 500 m/s2(1640 ft/s2) approx. 50G for 10 times each in X, Y, and Z directions

Enclosure rating IEC IP67

Weight (with 2-m cord) Approx. 70 g (2.47 oz)

Material Case Heat-resistant ABS resin

Sensing

surface

Heat-resistant ABS resin

TL-T TL- T

eration

JOUTPUT CIRCUITS

Main

circuit

Load

Brown

Black

(See Note 1.)

Blue

Main

circuit

Load

Brown

Blue

Note: 1. 200 mA max. (load current)

2. When a transistor is connected

Note: 1. 200 mA max. (load current)

2. When a transistor is connected

NPN (DC 3-wire)

E Models F Models

PNP (DC 3-wire)

Black

(See Note 1.)

Output

(See

Note 2.)

Output

(See

Note 2.)

Main

circuit

Brown

Blue

Y Models

Load

(AC 2 -wire)

JTIMING CHARTS

E Models F Models

Yes

Operates

Releases

OFF

Target object

Operation indicator

Output voltage (between black

and blue leads)

Load (between brown and

black leads)

Yes

Operates

Releases

OFF

Target object

Operation indicator

Load (between blue and

black leads)

NPN (DC 3-wire) PNP (DC 3-wire)

Y Models

Target

object

Operation

indicator

Load

Yes

Operates

Releases

OFF

(DC 2 -wire)

TL-TTL-T

ineerin

Data

TL-T5M

TL-T5M standard object:

Ironwith15x15xt1in

size)

TL-T2 standar d object:

Ironwith12x12xt1in

size)

Sensing head

Sensing distance X (mm)

Steel

Stainless steel

(SUS304)

Brass

Aluminum

Side length of sensing object: d (mm)

Steel

Stainless steel (SUS304)

Brass

Aluminum

Side length of sensing object: d (mm)

JOPERATING RANGE

(TYPICAL)

JSENSING OBJECT SIZE AND MATERIAL VS. SENSING

DISTANCE (TYPICAL)

Sensing distance X (mm)

TL-T2

(at constant 200 VAC)

Load voltage V (V)

Load current

(

)

Load voltage V (V)

Load current

(

)

power

supply

volta

(

)

JLEAKAGE CURRENT

(TYPICAL)

JRESIDUAL LOAD VOLTAGE (TYPICAL)

Leakage current (mA)

100 VAC

200 VAC

TL-TjY(at constant 100 VAC)

TL-T TL- T

Dimensions

Unit: mm (inch)

Sensing

surface

Indicator

Two, 3.1 dia. (0.122)

Tw o , M3 ,

depth 6

DC switching model: Three, 0.2-mm (0.007 in) conductors

AC switching model: Two, 0.3-mm (0.012 in) conductors

Oil- and vibration-resistant, vinyl-insulated round cord,

4 external dia.; standard length: 2 m (6.56 ft)

6 (0.24)

(1.57)

(1.02)

5 (0.19)

9 (0.35)

(0.47)

17¦0.2

(0.787¦0.008)

16¦0.2

(0.0.63¦0.008)

32¦0.2

(1.259¦0.008)

Precautions

JCONNECTION TO THE LOAD

Be sure to connect the Proximity Sensor to the power source

through a load. Direct connection of the Sensor may damage the

Sensor.

Load

90 to 250 VAC

JMOUNTING

At the time of rear mounting, be sure that the tightening torque

does not exceed 6 kgf Scm (0.59 N Sm) 5.22 in Slbf.

Mounting screws, each tight-

ened to torque 6 kgf Scm

(0.59 N Sm) max.

At the time of side mounting, be sure that the tightening torque

does not exceed 8 kgf Scm (0.78 N Sm) 2.02 in Slbf.

Mounting screws, each tight-

ened to torque 8 kgf Scm

(0.78 N Sm) max.

TL-TTL-T

JEFFECT OF SURROUNDING METALS

If the TL-T5M is embedded in metal, keep at least the following

distances between the TL-T and the metal.

If the TL-T2 is embedded in

metal, the TL-T2 will not be

influenced by metal.

15 mm (0.59)

25 mm (0.98)

12 mm

(0.47)

15 mm 15 mm

15 mm (0.59)

JMUTUAL INTERFERENCE

When two or more TL-T sensors are mounted face-to-face or side-

by-side, separate them as shown below. The table below indicates

the minimum distances A and B.

Distance A B

TL-T5jj 120 mm (4.72 in) 80 mm (3.15 in)

TL-T5jj560 mm (2.36 in) 40 mm (1.57 in)

TL-T2jj 40 mm (1.57 in) 12 mm (0.47 in)

TL-T2jj510 mm (0.39 in) 0mm

Note: Figures in parentheses will apply if the Sensors in use are

different from each other in response frequency.

Cat. No. CEDSAX4 11/01 Specifications subject to change without notice. Printed in U.S.A

OMRON ELECTRONICS LLC

One East Commerce Drive

Schaumburg, IL 60173

NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.

1-800-55-OMRON

OMRON CANADA, INC.

885 Milner Avenue

Scarborough, Ontario M1B 5V8

416-286-6465

OMRON ON--LINE

Global -- http://www.omron.com

USA -- http://www.omron.com/oei

Canada -- http://www.omron.com/oci