EMI Suppression Capacitors X2 / 275 Vac B 81 133 X2 capacitors with small dimensions Rated ac voltage 275 V, 50/60 Hz Construction Dielectric: polyester (MKT) Internal series connection Plastic case (UL 94 V-0) Epoxy resin sealing, flame-retardant Features Self-healing properties Terminals Parallel wire leads, tinned Two standard lead lengths available: 6 mm und 26 mm Other lead lengths available upon request. Lead spacing 0,4 27,5 mm 37,5 mm Lead dia. d (mm) 0,8 1,0 Lead length l1 (mm) 6-1 26 2 6-1 26 2 Manufacturer's logo, lot number, date code, rated capacitance (coded), capacitance tolerance (code letter), rated ac voltage, type number, interference suppression sub-class (X2), style (MKT), self-healing (SH), climatic category, awarded marks of conformity. Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to page 279. Marks of conformity Marks of conformity 210 Standards Certificate EN 132400 / IEC 384-14, 2nd edition UL 1283 (250 V) UL 1414 CSA C22.2 No. 0; 1 (250 V) CSA C22.2 No. 0; 8 (250 V) 9516010-01 E157153 E97863/95NK32316 LR 59709 LR 59709 Siemens Matsushita Components /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B81133 Marking /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B81133 B 81 133 275 Vac X2 Ordering codes and packing units Lead CR spacing 0,4 mm 15 22,5 27,5 37,5 22 nF 33 nF 47 nF 68 nF 0,10 F 0,15 F 0,10 F 0,15 F 0,22 F 0,33 F 0,47 F 0,33 F 0,47 F 0,68 F 1,0 F 1,5 F 2,2 F Maximum dimensions bxhxl (mm) 5,0 x 10,5 x 18,0 5,0 x 10,5 x 18,0 6,0 x 11,0 x 18,0 7,0 x 12,5 x 18,0 8,5 x 14,5 x 18,0 8,5 x 14,5 x 18,0 6,0 x 15,0 x 26,5 7,0 x 16,0 x 26,5 8,5 x 16,5 x 26,5 10,5 x 16,5 x 26,5 11,0 x 20,5 x 26,5 11,0 x 21,0 x 31,5 11,0 x 21,0 x 31,5 12,5 x 21,5 x 31,5 14,0 x 24,5 x 31,5 18,0 x 27,5 x 31,5 18,0 x 32,5 x 41,5 Ordering code1) Packing units (pcs) Ammo Reel Untaped pack Lead length B81133-C1223-M*** B81133-C1333-M*** B81133-C1473-M*** B81133-C1683-M*** B81133-D1104-M*** B81133-D1154-M*** B81133-C1104-M*** B81133-C1154-M*** B81133-C1224-M*** B81133-D1334-M*** B81133-D1474-M*** B81133-C1334-M*** B81133-C1474-M*** B81133-C1684-M*** B81133-C1105-M*** B81133-C1155-M*** B81133-C1225-M*** 1170 1170 960 830 680 680 680 580 480 390 370 - - - - - - 1300 1300 1100 900 700 700 700 600 500 400 350 350 350 300 - - - 6 mm 1000 1000 1000 1000 500 500 720 630 510 540 510 320 320 280 260 200 90 26 mm 1000 1000 1000 800 500 500 500 500 450 350 300 200 200 200 150 100 60 Capacitance tolerance: 20 % = M (closer tolerances upon request) 1) Replace the *** by the code number for the required lead length or packing. 000 = lead length 6 mm (untaped) 026 = lead length 26 mm (untaped) 289 = taped, Ammo pack 189 = taped, reel Siemens Matsushita Components 211 X2 B 81 133 275 Vac Technical data 40/100/21 - 40 C + 100 C 21 days/40 C/93 % relative humidity Capacitance change |C/C| Dissipation factor change tan Insulation resistance Ris or time constant = CR Ris 275 V (50/60 Hz) 5% 5 10-3 (at 1 kHz) 50 % of minimum as-delivered values Permissible continuous ac voltage Permissible continuous dc voltage 630 V DC test voltage 1800 V, 2 s Dissipation factor tan (in 10-3) CR 0,1 F 0,1 F < CR 1 F at 20 C 8 at 1 kHz 8 (upper limit values) 10 kHz 15 15 100 kHz 30 - Insulation resistance Ris or time constant = CR Ris at 20 C, rel. humidity 65 % (minimum as-delivered values) Impedance Z versus frequency f (typical values) 212 CR 0,33 F 30 000 M CR > 1 F 10 - - CR > 0,33 F 10 000 s Siemens Matsushita Components /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B81133 Climatic category in accordance with IEC 68-1 Lower category temperature Tmin Upper category temperature Tmax Damp heat test Limit values after damp heat test B 81 133 275 Vac X2 Pulse handling capability Maximum permissible voltage change per unit of time for non-sinusoidal voltages (pulse, sawtooth). VR 275 Vac Max. rate of voltage rise Vpp/ (for Vpp = V R) Lead spacing 15 mm 22,5 mm 27,5 mm 60 30 20 37,5 mm 8 For Vpp < V R, the permissible voltage rise rate Vpp/ may be multiplied by the factor VR/Vpp. Also refer to the calculation example on page 250. VR 37,5 mm 55 000 /u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B81133 275 Vac Pulse characteristic k0 in V2/s (for Vpp V R) Lead spacing 15 mm 22,5 mm 27,5 mm 45 000 20 000 12 000 Siemens Matsushita Components 213