Bussmann(R) Ferrule Type, Fast-Acting Fuses KTQ For 13/32" x 1-3/8" (10.3mm x 35mm) . ed s u e i n r i t e n S . o c S 3 s i 1 BB ions 0 D 2 t s e , a e h 1 i c t er ly 3 t is ecifi S e e Ju en Sp s Fu ctiv cem for Q ffe pla 10 T K 0 E Re 2 d et # e d he n e S m a t om Da c Re See Dimensional Data 1.375" (0.031) (35mm) .41" (0.004) (10.3mm) KTQ-4 KTQ-1-6/10 KTQ-5 KTQ-2 KTQ-6 KTQ-3 Test Specifications Load Opening Time 135% 1 hr. (max.) 110% Indefinitely Recommended fuseblocks/fuseholders for 13/32" x 1-1/2" fuses See Data Sheets listed below * Open fuseblocks - 1104, 2104 * Finger-safe fuseholders - 1109, 1102, 1103, 1151 * Panel-mount fuseholders - 2114, 2113, 2108, 2112, 2109, 2140 * In-line fuseholders - 2127, 2126 1 1-6/10 2 3 4 5 .1 .01 RMS SYMMETRICAL CURRENT IN AMPERES 100 KTQ-1 10 600 Volts AC 1 1 Electrical Ratings (Catalog Symbol and Amperes) AMPERE RATING 10 100 * Mounts in Buss panel-mount fuseholders HPS-L, BM-series blocks, or 13/32" clips. 100 10 * Slightly more delay than type BBS to override transient currents. (Full Size Curves Available) 1 * For control, gaseous vapor fixture, and HID ballast; electronic circuits. * Melamine cartridge. Time-Current Characteristic Curves-Average Melt TIME IN SECONDS Catalog Symbol:KTQ Ferrule Type, Fast-Acting 1-6A 600Vac Agency Information: UL Recognized, STD 248-14, (Guide # JDYX2, File E19 180) Interrupt Rating: 10,000A RMS Sym. Body Material: Melamine Ferrule Material: Bronze Ferrule Plating: Nickel CE logo denotes compliance with European Union Low Voltage Directive (50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at 636-527-1270 for more information. The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are ly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, wit ucts and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information it should be tested by the user in all possible applications. 10-2-02 SB02295 Form No. KTQ Page 1 of 1 Data Sheet: 2045