VEMD1160X01
www.vishay.com Vishay Semiconductors
Rev. 1.1, 30-Jun-16 1Document Number: 84305
For technical questions, contact: detectortechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Silicon PIN Photodiode
DESCRIPTION
VEMD1160X01 is a high speed and high sensitive PIN
photodiode with a highly linear photoresponse. It is a low
profile surface mount device (SMD) including the chip with a
0.23 mm2 sensitive area and a daylight blocking filter.
FEATURES
• Package type: surface mount
• Package form: 0805 top view
• Dimensions (L x W x H in mm): 2 x 1.25 x 0.85
• Radiant sensitive area (in mm2): 0.23
• Daylight blocking filter
• AEC-Q101 qualified
• High photo sensitivity
• High radiant sensitivity
• Excellent Ira linearity
• Fast response times
• Angle of half sensitivity: ϕ = ± 70°
• Floor life: 72 h, MSL 4, according to J-STD-020
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• High speed photo detector
• Small signal detection
• Proximity sensors
Note
• Test conditions see table “Basic Characteristics”
Note
• MOQ: minimum order quantity
PRODUCT SUMMARY
COMPONENT Ira (μA) ϕ (deg) λ0.1 (nm)
VEMD1160X01 1.8 ± 70 700 to 1070
ORDERING INFORMATION
ORDERING CODE PACKAGING REMARKS PACKAGE FORM
VEMD1160X01 Tape and reel MOQ: 3000 pcs, 3000 pcs/reel 0805 top view
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Reverse voltage VR20 V
Power dissipation Tamb ≤ 25 °C PV215 mW
Junction temperature Tj110 °C
Operating temperature range Tamb -40 to +110 °C
Storage temperature range Tstg -40 to +110 °C
Soldering temperature According to reflow solder profile Fig. 6 Tsd 260 °C
Thermal resistance junction / ambient According to EIA / JESD 51 RthJA 270 K/W
VEMD1160X01
www.vishay.com Vishay Semiconductors
Rev. 1.1, 30-Jun-16 2Document Number: 84305
For technical questions, contact: detectortechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Basic characteristics graphs to be extended to 110 °C ambient temperatures where applicable.
Fig. 1 - Reverse Dark Current vs. Ambient Temperature Fig. 2 - Relative Reverse Light Current vs. Ambient Temperature
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Forward voltage IF = 50 mA VF-0.91.1V
Breakdown voltage IR = 100 μA, E = 0 V(BR) 20 - - V
Reverse dark current VR = 10 V, E = 0 Iro -0.015nA
Diode capacitance VR = 0 V, f = 1 MHz, E = 0 CD-3.8-pF
VR = 3 V, f = 1 MHz, E = 0 CD-1.8-pF
Open circuit voltage Ee = 1 mW/cm2, λ = 950 nm Vo- 350 - mV
Temperature coefficient of VoEe = 1 mW/cm2, λ = 950 nm TKVo --2.6-mV/K
Short circuit current Ee = 1 mW/cm2, λ = 950 nm Ik-1.8-μA
Temperature coefficient of IkEe = 1 mW/cm2, λ = 835 nm TKIk -0.1-%/K
Reverse light current Ee = 1 mW/cm2, λ = 950 nm, VR = 5 V Ira 1.4 1.8 3 μA
Ee = 1 mW/cm2, λ = 890 nm, VR = 5 V Ira -2.6-μA
Angle of half sensitivity ϕ-± 70-deg
Wavelength of peak sensitivity λp- 840 - nm
Range of spectral bandwidth λ0.1 - 700 to 1070 - nm
Rise time VR = 5 V, RL = 50 Ω, λ = 820 nm tr-60-ns
Fall time VR = 5 V, RL = 50 Ω, λ = 820 nm tf-80-ns
0.0001
0.001
0.01
0.1
1
10
100
-40 -20 0 20 40 60 80 100
Iro - Reverse Dark Current (nA)
Tamb - Ambient Temperature (°C)
VR= 10 V
0.6
0.8
1.0
1.2
1.4
-40-200 20406080100
Ira rel - Relative Reverse Light Current
Tamb - Ambient Temperature (°C)
835 nm
VR= 10 V
940 nm
865 nm
VEMD1160X01
www.vishay.com Vishay Semiconductors
Rev. 1.1, 30-Jun-16 3Document Number: 84305
For technical questions, contact: detectortechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Reverse Light Current vs. Irradiance
Fig. 4 - Reverse Light Current vs. Reverse Voltage
Fig. 5 - Diode Capacitance vs. Reverse Voltage
Fig. 6 - Relative Spectral Sensitivity vs. Wavelength
Fig. 7 - Relative Radiant Sensitivity vs. Angular Displacement
0.01
0.1
1
10
100
0.01 0.1 1 10
Ira - Reverse Light Current (μA)
Ee- Irradiance (mW/cm2)
VR= 5 V, λ= 950 nm
0.01
0.1
1
10
0.1 1 10 100
Ira - Reverse Light Current (μA)
VR- Reverse Voltage (V)
0.01 mW/cm2
0.02 mW/cm2
0.05 mW/cm2
0.1 mW/cm2
0.2 mW/cm2
2.0 mW/cm2
5.0 mW/cm2
0.5 mW/cm2
1.0 mW/cm2
10 mW/cm2
λ = 950 nm
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0.001 0.01 0.1 1 10 100
CD- Capacitance (pF)
VR- Reverse Voltage (V)
f = 1 MHz, E = 0
0
0.2
0.4
0.6
0.8
1.0
400 500 600 700 800 900 1000 1100
S(λ)rel - Relative Spectral Sensitivity
λ- Wavelength (nm)
Srel - Relative Radiant Sensitivity
0.6
80°
0°
0.7
0.4 0.2 0
30°
70°
60°
50°
40°
10° 20°
1.0
0.9
0.8
ϕ- Angular Displacement
VEMD1160X01
www.vishay.com Vishay Semiconductors
Rev. 1.1, 30-Jun-16 4Document Number: 84305
For technical questions, contact: detectortechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
REFLOW SOLDER PROFILE
Fig. 8 - Lead (Pb)-free Reflow Solder Profile
According to J-STD-020
DRYPACK
Devices are packed in moisture barrier bags (MBB) to
prevent the products from moisture absorption during
transportation and storage. Each bag contains a desiccant.
FLOOR LIFE
Floor life (time between soldering and removing from MBB)
must not exceed the time indicated on MBB label:
Floor life: 72 h
Conditions: Tamb < 30 °C, RH < 60 %
Moisture sensitivity level 4, according to J-STD-020.
DRYING
In case of moisture absorption devices should be baked
before soldering. Conditions see J-STD-020 or label.
Devices taped on reel dry using recommended conditions
192 h at 40 °C (+ 5 °C), RH < 5 %.
PACKAGE DIMENSIONS in millimeters
0
50
100
150
200
250
300
0 50 100 150 200 250 300
Time (s)
Temperature (°C)
240 °C 245 °C
max. 260 °C
max. 120 s max. 100 s
217 °C
max. 30 s
max. ramp up 3 °C/s
max. ramp down 6 °C/s
19841
255 °C
20018
VEMD1160X01
www.vishay.com Vishay Semiconductors
Rev. 1.1, 30-Jun-16 5Document Number: 84305
For technical questions, contact: detectortechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BLISTER TAPE DIMENSIONS in millimeters
VEMD1160X01
www.vishay.com Vishay Semiconductors
Rev. 1.1, 30-Jun-16 6Document Number: 84305
For technical questions, contact: detectortechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
REEL DIMENSIONS in millimeters
of the wheel is supplier specic.
Form of the leave open
Issue: 2; 26.04.10
Drawing-No.: 9.800-5096.01-4
specications
according to DIN
technical drawings
Ø 177.8 max.
Ø 55 min.
8.4 +2.5
8.4 +0.15
14.4 max.
Ø 13 + 0.5
- 0.2
1.5 min.
Ø 20.2 min.
Z
Z 2:1
20875
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2021 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
