T2500D - ON Semiconductor

April, 2006 − Rev. 4 1Publication Order Number:

T2500/D

T2500D

Triacs

Silicon Bidirectional Thyristors

Designed primarily for full-wave ac control applications, such as

light dimmers, motor controls, heating controls and power supplies.

Features

•Blocking Voltage 400 V

•All Diffused and Glass Passivated Junctions for Greater Parameter

Uniformity and Stability

•Small, Rugged, Thermowatt Construction for Low Thermal

Resistance, High Heat Dissipation and Durability

•High Surge Current Capability 60 A Peak at TC = 80°C

•Pb−Free Package is Available*

MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)

Rating Symbol Value Unit

Peak Repetitive Off−State Voltage (Note 1)

(Sine Wave 50 to 60 Hz,

TJ = −40 to +100°C, Gate Open)

VDRM,

VRRM 400 V

On−State RMS Current (TC = +80°C)

(Full Cycle Sine Wave 50 to 60 Hz) IT(RMS) 6.0 A

Peak Non−repetitive Surge Current

(One Full Cycle, 60 Hz, TC = +80°C) ITSM 60 A

Circuit Fusing Considerations (t = 8.3 ms) I2t 15 A2s

Peak Gate Power

(TC = +80°C, Pulse Width = 10 msec) PGM 16 W

Average Gate Power

(TC = +80°C, t = 8.3 ms) PG(AV) 0.2 W

Peak Gate Current (Pulse Width = 10 msec) IGM 4.0 A

Operating Junction Temperature Range TJ−40 to +125 °C

Storage Temperature Range Tstg −40 to +150 °C

THERMAL CHARACTERISTICS

Characteristic Symbol Max Unit

Thermal Resistance, Junction−to−Case RqJC 2.7 °C/W

Maximum Lead Temperature for Soldering

Purposes 1/8″ from Case for 10 Seconds TL260 °C

Stresses exceeding Maximum Ratings may damage the device. Maximum

Ratings are stress ratings only. Functional operation above the Recommended

Operating Conditions is not implied. Extended exposure to stresses above the

Recommended Operating Conditions may affect device reliability.

1. VDRM, VRRM for all types can be applied on a continuous basis. Blocking

voltages shall not be tested with a constant current source such that the

voltage ratings of the devices are exceeded.

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

TRIACS

6 AMPERES RMS

400 VOLTS

Device Package Shipping

ORDERING INFORMATION

T2500D TO220AB 500 Units / Box

TO−220AB

CASE 221A

STYLE 4

PIN ASSIGNMENT

3 Gate

Main Terminal 1

Main Terminal 2

4Main Terminal 2

MT1

MT2

T2500DG TO220AB

(Pb−Free) 500 Units / Box

http://onsemi.com

T2500DG

AYWW

A = Assembly Location

Y = Year

WW = Work Week

G = Pb−Free Package

MARKING

DIAGRAM

T2500D

http://onsemi.com

ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted; Electricals apply in both directions)

Characteristic Symbol Min Typ Max Unit

OFF CHARACTERISTICS

Peak Repetitive Blocking Current TJ = 25°C

(Rated VDRM, VRRM; Gate Open) TJ = 100°CIDRM,

IRRM − − 10

2.0 mA

ON CHARACTERISTICS

Peak On-State Voltage (Note 2)

(ITM = "30 A Peak) VTM − − 2.0 V

Gate Trigger Current (Continuous dc)

(VD = 12 Vdc, RL = 100 W)

MT2(+), G(+)

MT2(+), G(−)

MT2(−), G(−)

MT2(−), G(+)

IGT

−

Gate Trigger Voltage (Continuous dc) (All Four Quadrants)

(VD = 12 Vdc, RL = 100 W)VGT − 1.25 2.5 V

Gate Non−Trigger Voltage

(VD = 12 V, RL = 100 W, TC = 100°C) VGD 0.2 − − V

Holding Current

(Main Terminal Voltage = 12 Vdc, Gate Open, Initiating Current = "200 mA) IH− 15 30 mA

Gate Controlled Turn-On Time

(Rated VDRM, IT = 10 A , IGT = 160 mA, Rise T ime = 0.1 ms) tgt − 1.6 − ms

DYNAMIC CHARACTERISTICS

Critical Rate-of-Rise of Commutation Voltage

(Rated VDRM, IT(RMS) = 6 A, Commutating di/dt = 3.2 A/ms, Gate Unenergized,

TC = 80°C)

dv/dt(c) − 10 − V/ms

Critical Rate-of-Rise of Off-State Voltage

(Rated VDRM, Exponential Voltage Rise, Gate Open, TC = 100°C) dv/dt − 75 − V/ms

2. Pulse Test: Pulse Width ≤ 2.0 ms, Duty Cycle ≤ 2%.

T2500D

http://onsemi.com

+ Current

+ Voltag

VTM

Symbol Parameter

VDRM Peak Repetitive Forward Off State Voltage

IDRM Peak Forward Blocking Current

VRRM Peak Repetitive Reverse Off State Voltage

IRRM Peak Reverse Blocking Current

Voltage Current Characteristic of Triacs

(Bidirectional Device)

IDRM at VDRM

on state

off state

IRRM at VRRM

Quadrant 1

MainTerminal 2 +

Quadrant 3

MainTerminal 2 − VTM

VTM Maximum On State Voltage

IHHolding Current

MT1

(+) IGT

GATE

(+) MT2

REF

MT1

(−) IGT

GATE

(+) MT2

REF

MT1

(+) IGT

GATE

(−) MT2

REF

MT1

(−) IGT

GATE

(−) MT2

REF

−

MT2 NEGATIVE

(Negative Half Cycle)

MT2 POSITIVE

(Positive Half Cycle)

Quadrant III Quadrant IV

Quadrant II Quadrant I

Quadrant Definitions for a Triac

IGT −+ IGT

All polarities are referenced to MT1.

With in−phase signals (using standard AC lines) quadrants I and III are used.

T2500D

http://onsemi.com

PACKAGE DIMENSIONS

CASE 221A−07

ISSUE AA

TO−220

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. DIMENSION Z DEFINES A ZONE WHERE ALL

BODY AND LEAD IRREGULARITIES ARE

ALLOWED.

STYLE 4:

PIN 1. MAIN TERMINAL 1

2. MAIN TERMINAL 2

3. GATE

4. MAIN TERMINAL 2

DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A0.570 0.620 14.48 15.75

B0.380 0.405 9.66 10.28

C0.160 0.190 4.07 4.82

D0.025 0.035 0.64 0.88

F0.142 0.147 3.61 3.73

G0.095 0.105 2.42 2.66

H0.110 0.155 2.80 3.93

J0.014 0.022 0.36 0.55

K0.500 0.562 12.70 14.27

L0.045 0.060 1.15 1.52

N0.190 0.210 4.83 5.33

Q0.100 0.120 2.54 3.04

R0.080 0.110 2.04 2.79

S0.045 0.055 1.15 1.39

T0.235 0.255 5.97 6.47

U0.000 0.050 0.00 1.27

V0.045 −−− 1.15 −−−

Z−−− 0.080 −−− 2.04

123

−T− SEATING

PLANE

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty , representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, af filiates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Japan: ON Semiconductor, Japan Customer Focus Center

2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051

Phone: 81−3−5773−3850

T2500/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 61312, Phoenix, Arizona 85082−1312 USA

Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada

Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: http://onsemi.com

Order Literature: http://www.onsemi.com/litorder

For additional information, please contact your

local Sales Representative.