EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Chip LED with Bi-Color(Multi-Color) 11-22/Y2G6C-A01/2T Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-Free. The product itself will remain within RoHS compliant version. Descriptions The 11-22 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Revision Type Material Y2 AlGaInP G6 AlGaInP Emitted Color Resin Color Brilliant Yellow Water Clear Brilliant Yellow Green Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A15 Prepared date: 10-Mar-2008 :1 LifecyclePhase: Rev 1 Page: 1 of 12 Prepared by:Qilong Chen Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/Y2G6C-A01/2T Package Outline Dimensions Notes: Tolerances Unless Dimension 0.1mm, Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A15 Prepared date: 10-Mar-2008 :1 LifecyclePhase: Rev 1 Page: 2 of 12 Prepared by:Qilong Chen Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/Y2G6C-A01/2T Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF Power Dissipation Pd Peak Forward Current (Duty 1/10 @1KHz) IFP Electrostatic Discharge(HBM) ESD Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40~ +90 Soldering Temperature Tsol Revision Y2:25 Y2:60 Y2:60 mA G6:60 Y2:2000 V G6:2000 Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. http://www.everlight.com Device No:SZDSE-112-A15 Prepared date: 10-Mar-2008 LifecyclePhase: mW G6:60 Everlight Electronics Co., Ltd. :1 mA G6:25 Rev 1 Page: 3 of 12 Prepared by:Qilong Chen Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/Y2G6C-A01/2T Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Symbol Iv Viewing Angle Peak Wavelength Min. Typ. Max. Y2 112 225 450 G6 57 140 225 ----- 60 ----- deg ----- nm 21/2 p Y2 G6 ----- 591 518 Unit Condition mcd IF=20mA Dominant Wavelength d Spectrum Radiation Bandwidth Forward Voltage Reverse Current Y2 585 ---- 595 G6 567 ---- 573 Y2 G6 ----- 15 ----- 20 VF Y2 1.7 2.0 2.4 G6 1.7 2.0 2.4 ----- ----- IR Y2 G6 10 10 nm nm V A VR=5V Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A15 Prepared date: 10-Mar-2008 :1 LifecyclePhase: Rev 1 Page: 4 of 12 Prepared by:Qilong Chen Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/Y2G6C-A01/2T Bin Range Of Luminous Intensity Y2 Bin Min Max R 112 180 S 180 285 T 285 450 Bin Min Max 1 57 90 2 90 140 3 140 225 Unit Condition mcd IF =20mA Unit Condition mcd IF =20mA G6 Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A15 Prepared date: 10-Mar-2008 :1 LifecyclePhase: Rev 1 Page: 5 of 12 Prepared by:Qilong Chen Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/Y2G6C-A01/2T Typical Electro-Optical Characteristics Curves Y2 Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A15 Prepared date: 10-Mar-2008 :1 LifecyclePhase: Rev 1 Page: 6 of 12 Prepared by:Qilong Chen Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/Y2G6C-A01/2T Typical Electro-Optical Characteristics Curves G6 Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A15 Prepared date: 10-Mar-2008 :1 LifecyclePhase: Rev 1 Page: 7 of 12 Prepared by:Qilong Chen Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/Y2G6C-A01/2T Label explanation CAT: Luminous Intensity Rank xxxxxx xxxxxx HUE: Dom. Wavelength Rank RoHS REF: Forward Voltage Rank xxxxxxxxxxxx xxxx xxxxxxxx Reel Dimensions Note: Tolerances Unless Dimension 0.1mm,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A15 Prepared date: 10-Mar-2008 :1 LifecyclePhase: Rev 1 Page: 8 of 12 Prepared by:Qilong Chen Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/Y2G6C-A01/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: Tolerances Unless Dimension 0.1mm , Unit = mm Moisture Resistant Packaging Label Revision Aluminum moistue-proof bag Desiccant Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A15 Prepared date: 10-Mar-2008 :1 LifecyclePhase: Rev 1 Label Page: 9 of 12 Prepared by:Qilong Chen Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/Y2G6C-A01/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 2 Temperature Cycle 3 Thermal Shock High Temperature Storage Low Temperature Storage 4 5 Revision Test Sample Hours/Cycles Size Ac/Re 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A15 Prepared date: 10-Mar-2008 :1 LifecyclePhase: Rev 1 Page: 10 of 12 Prepared by:Qilong Chen Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/Y2G6C-A01/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A15 Prepared date: 10-Mar-2008 :1 LifecyclePhase: Rev 1 Page: 11 of 12 Prepared by:Qilong Chen Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/Y2G6C-A01/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A15 Prepared date: 10-Mar-2008 :1 LifecyclePhase: Rev 1 Page: 12 of 12 Prepared by:Qilong Chen Release Date:2008-09-20 00:16:09.0 Expired Period: Forever