MINI8510 PROCESSOR CARD - EMBEST

1

Embest Mini8510 Processor Card

Top-View Bottom-View

Features

Mechanical Parameters

z Dimensions: 67 x 37 mm

z Working temperature: 0~70 Celsius

z Humidity Range: 20% ~ 90%

z Power Consumption: 1A @ 3.3V

Processor

z TI DM3730 DaVinci Digital Media Processor (pin-to-pin compatible with TI AM3715)

- Up to 1-GHz ARM® Cortex™-A8 Core, also supports 300, 600, and 800-MHz operation

- Up to 800-MHz TMS320C64x+™ DSP Core, also supports 260, 520 and 660-MHz

operation (DM3730 only)

- NEON™ SIMD Coprocessor

- POWERVR SGX™ Graphics Accelerator

- ARM: 32KB I-Cache; 32KB D-Cache; 256KB L2 Cache

- Onchip 32KB ROM and 64KB Shared SDRAM

Memory

z 256MB DDR SDRAM, 32-bit

z 512MB NAND Flash, 16-bit

Onboard Headers and Signals Routed to Pins

z 12-bit Camera interface (30-pin FPC connector, support CCD or CMOS camera)

z 1-channal 4-wire JTAG interface (10-pin 1.0mm pitch connector)

z 6 LEDs (programmable status LEDs)

z 2-channel SPI

z GPMC bus (16-bit data bus, 10-bit address bus, 4 chip-selection signals and several

control signals)

z 3-channel 5-wire UARTs

z 1-channel ULPI (USB1 HS)

z Audio in/out

2

z 1-channel I2C

z 2-channel McBSP (McBSP1 and McBSP3, McBSP3 is multiplex with UART2)

z 2-channel SD/MMC: MMC1 (8-wire), MMC2 (4-wire)

z 24-bit DSS interface

General Description

Embest Mini8510 processor card is based on TI’s DM3730 DaVinci Digital Media processor

which is powered by 1GHz ARM Cortex-A8 and 800MHz C64x+ DSP core. The Mini8510

hardware is compatible with Embest Mini8100 OMAP3530 processor card which is convenient

for customers who used Mini8100 before to upgrade to Mini8510 so as to migrate from the

OMAP3530 to DM3730 for their embedded designs.

The SBC8100 expansion board for integration of the Embest Mini8100 processor card can be also

used for Mini8510. The processor card is connected with SBC8100 expansion board through two

1.27mm space 2*45-pin dip connectors. We call the upgraded DM3730 system SBC8100 Plus.

Embest offers Linux 2.6.32 and WinCE6.0 BSP for this board. Customers can leverage our

experience to increase your own productivity. The optimal embedded microprocessor solution

provides users with a flexible development environment based on DM3730 and a shortened

development timeframe.

Layout and Functional Block Diagram

DM3730 / AM3715

1GHz ARM Cortex-A8

800MHz TMS320C64x (DM3730 only)

NEON, SGX Graphics Accelerator

I2C

MMC

DSS

SDRC

GPM

C

CCD/CMOS

Interface

USB

Interface

JTAG TV GPIO UART

MCP

Memory

TPS65930

Power

Management

Keyboard

OT

G

A

udio ou

t

A

udio in

CONNECTOR to MAINBOARD

N

and Flash

512MB 16b

i

t

DDR

SDRAM

256MB 32bit

3

Dimensions

Mini8510 Top View

4

Mini8510 Top-View Perspective Drawing

5

Camera interface

Embest Mini8510 processor card uses a 30-pin FPC connector, supporting CCD or CMOS camera.

Detailed pin explanation is as following:

Pin Signal Description

1 GND GND

2 D0 Digital image data bit 0

3 D1 Digital image data bit 1

4 D2 Digital image data bit 2

5 D3 Digital image data bit 3

6 D4 Digital image data bit 4

7 D5 Digital image data bit 5

8 D6 Digital image data bit 6

9 D7 Digital image data bit 7

10 D8 Digital image data bit 8

11 D9 Digital image data bit 9

12 D10 Digital image data bit 10

13 D11 Digital image data bit 11

14 GND GND

15 PCLK Pixel clock

16 GND GND

17 HS Horizontal synchronization

18 VDD50 5V

19 VS Vertical synchronization

20 VDD33 3.3V

21 XCLKA Clock output a

22 XCLKB Clock output b

23 GND GND

24 FLD Field identification

25 WEN Write Enable

26 STROBE Flash strobe control signal

27 SDA IIC master serial clock

28 SCL IIC serial bidirectional data

29 GND GND

30 VDD18 1.8V

6

JTAG interface

Embest Mini8510 processor card has a 10-pin 1.0mm pitch JTAG connector on board. Detailed

pin explanation is as following:

Pin Signal Description

1 VDD18 1.8V output

2 TMS Test mode select

3 TD1 Test data input

4 NTRST Test system reset

5 TD0 Test data output

6 RTCK Receive test clock

7 TCK Test clock

8 EMU0 Test emulation 0

9 EMU1 Test Emulation 1

10 GND GND

Two 2*45-pin Expansion Connectors

Embest Mini8510 processor card is connected to carrierboard via two 1.27mm space 2*45-pin dip

connectors.

Detailed pin explanation for CON1 is as following:

Pin Signal Description

1 G_NWE GPMC Write Enable

2 G_NOE GPMC Read Enable

3 G_NCS7GPT8G_DIR GPMC Chip Select bit 7PWM or event for GP timer

8GPMC IO direction control for use with external

transceivers

4 G_NCS4GPT9DMAREQ1 GPMC Chip Select bit 7PWM or event for GP timer

9External DMA request 1

5 G_NCS6GPT11DMAREQ3 GPMC Chip Select bit 7PWM or event for GP timer 11

External DMA request 3

6 G_NCS3DMAREQ0 GPMC Chip Select bit 7External DMA request 0

7 GND GND

8 G_WAIT0 External indication of wait

9 G_NBE0 / G_CLE Lower Byte Enable. Also used for Command Latch Enable

10 G_NATV_ALE Address Valid or Address Latch Enable

11 G_NBE1 Upper Byte Enable

12 HDQ_SIO Bidirectional HDQ 1-Wire control and data

13 MMC1_D0 MMC/SD Card Data bit 0

14 MMC1_D1 MMC/SD Card Data bit 1

15 MMC1_D2 MMC/SD Card Data bit 2

16 MMC1_D6/IO128 MMC/SD Card Data bit 6

17 MMC1_D5/IO127 MMC/SD Card Data bit 5

18 MMC1_D4/IO126 MMC/SD Card Data bit 4

19 MMC1_D7/IO129 MMC/SD Card Data bit 7

7

20 MMC1_D3 MMC/SD Card Data bit 3

21 GND GND

22 MMC1_CLK MMC/SD Output Clock

23 MMC1_CMD MMC/SD command signal

24 VMMC1 Power supply for SD/MMC1 (3.0 / 1.8V)

25 UART3_RX_IRRX UART3 Receive data, IR and Remote RX

26 UART3_CTS_RCTX UART3 Clear To Send, Remote TX

27 UART3_TX_IRTX UART3 Transmit data, IR TX

28 UART3_RTS_SD UART3 Request To Send, IR enable

29 DSS_ACBIAS AC bias control (STN) or pixel data enable (TFT) output

30 DSS_VSYNC LCD Vertical Synchronization

31 GND GND

32 DSS_HSYNC LCD Horizontal Synchronization

33 DSS_CLK LCD Pixel Clock

34 DSS_D6 LCD Pixel Data bit 6

35 DSS_D8 LCD Pixel Data bit 8

36 DSS_D7 LCD Pixel Data bit 7

37 DSS_D9 LCD Pixel Data bit 9

38 DSS_D20 LCD Pixel Data bit 20

39 DSS_D17 LCD Pixel Data bit 17

40 DSS_D16 LCD Pixel Data bit 16

41 DSS_D18 LCD Pixel Data bit 18

42 DSS_D10 LCD Pixel Data bit 10

43 DSS_D5 LCD Pixel Data bit 5

44 DSS_D4 LCD Pixel Data bit 4

45 GND GND

46 DSS_D2 LCD Pixel Data bit 2

47 DSS_D3 LCD Pixel Data bit 3

48 DSS_D0 LCD Pixel Data bit 0

49 DSS_D15 LCD Pixel Data bit 15

50 DSS_D11 LCD Pixel Data bit 11

51 DSS_D23 LCD Pixel Data bit 23

52 DSS_D22 LCD Pixel Data bit 22

53 DSS_D14 LCD Pixel Data bit 14

54 DSS_D19 LCD Pixel Data bit 19

55 DSS_D13 LCD Pixel Data bit 13

56 DSS_D21 LCD Pixel Data bit 21

57 DSS_D1 LCD Pixel Data bit 1

58 DSS_D12 LCD Pixel Data bit 12

59 GND GND

60 MCBSP1_FSR/IO157 Receive frame synchronization

61 MCBSP1_CLKR/IO156 Receive Clock

62 MCBSP1_FSX/IO161 Transmit frame synchronization

63 MCBSP1_CLKS/IO160 External clock input

64 MCBSP1_CLKX/IO162 Transmit clock

65 MCBSP1_DR/IO159 Received serial data

66 MCBSP1_DX/IO158 Transmitted serial data

67 GND GND

8

68 TV_OUTC TV analog output S-VIDEO: TV_OUT2

69 TV_OUTY TV analog output Composite: TV_OUT1

70 VDD33 Power supply for camera (3.3V 500mA )

71 IIC3_SCL I2C Master Serial clock. Output is open drain

72 IIC3_SDA I2C Serial Bidirectional Data. Output is open drain

73 IO25 General-purpose IO 183

74 IO27 General-purpose IO 183

75 BOOTJUMP Boot configuration mode bit 5.

76 GND GND

77 VBUS VBUS power rail (5V 10mA)

78 USB_DN USB Data N

79 USB_ID USB ID

80 USB_DP USB Data P

81 PWM0 Pulse width driver 0

82 KR0 Keypad row 0

83 KR1 Keypad row 1

84 KR2 Keypad row 2

85 KR3 Keypad row 3

86 KR4 Keypad row 4

87 VDD18 Power supply from TPS65930 (VIO 1.8V)

88 GND GND

89 VDD18 Power supply from TPS65930 (VIO 1.8V)

90 BKBAT Backup battery

Detailed pin explanation for CON2 is as following:

Pin Signal Description

1 GND GND

2 G_D14 GPMC data bit 14

3 G_D13 GPMC data bit 13

4 G_D10 GPMC data bit 10

5 G_D8 GPMC data bit 8

6 G_D9 GPMC data bit 9

7 G_D5 GPMC data bit 5

8 G_D7 GPMC data bit 7

9 G_D3 GPMC data bit 3

10 G_D6 GPMC data bit 6

11 G_D12 GPMC data bit 12

12 G_D2 GPMC data bit 2

13 G_D11 GPMC data bit 11

14 G_D1 GPMC data bit 1

15 G_D4 GPMC data bit 4

16 G_D0 GPMC data bit 0

17 G_A2 GPMC address bit 2

18 G_A3 GPMC address bit 3

19 G_A1 GPMC address bit 1

20 G_A6 GPMC address bit 6

21 G_A4 GPMC address bit 4

9

22 G_A7 GPMC address bit 7

23 G_A5 GPMC address bit 5

24 G_A8 GPMC address bit 8

25 G_A9 GPMC address bit 9

26 G_D15 GPMC data bit 15

27 G_A10 GPMC address bit 10

28 GND GND

29 SPI2_CS1 GPT8 SPI Enable 1PWM or event for GP timer 8

30 SPI2_CS10 GPT11 SPI Enable 0PWM or event for GP timer 11

31 SPI2_SIMO GPT9 Slave data in, master data out PWM or event for GP timer 9

32 SPI2_CLK SPI Clock

33 SPI2_SOMI GPT10 Slave data out, master data inPWM or event for GP timer 10

34 SPI1_CS3 SPI Enable 3

35 SPI1_CS0 SPI Enable 0

36 SPI1_SIMO Slave data in, master data out

37 SPI1_SOMI Slave data out, master data in

38 SPI1_CLK SPI Clock

39 GND GND

40 GPIO0 GPIO0 /card detection 1

41 MMC2_D2 SPI3_CS1 MMC/SD Card Data bit 2SPI Enable 1

42 MMC2_D3SPI3_CS0 MMC/SD Card Data bit 3SPI Enable 0

43 MMC2_D0SPI3_SOMI MMC/SD Card Data bit 0Slave data out, master data in

44 MMC2_D1 MMC/SD Card Data bit 1

45 MMC2_CMDSPI3_SIMO MMC/SD command signalSlave data in, master data out

46 MMC2_CLKSPI3_CLK MMC/SD Output ClockSPI Clock

47 BSP3_DRUART2_RTS Received serial dataUART2 Request To Send

48 BSP3_CLKUART2_TX Combined serial clockUART2 Transmit data

49 BSP3_FSXUART2_RX Combined frame synchronizationUART2 Receive data

50 BSP3_DXUART2_CTS Transmitted serial dataUART2 Clear To Send

51 GND GND

52 UART1_CTS UART1 Clear To Send

53 UART1_TX UART1 Transmit data

54 UART1_RX UART1 Receive data

55 UART1_RTS UART1 Request To Send

56 USB1HS_STP Dedicated for external transceiver Stop signal

57 USB1HS_D3 Dedicated for external transceiver Bidirectional data bus

58 USB1HS_D5 Dedicated for external transceiver Bidirectional data bus

59 USB1HS_6 Dedicated for external transceiver Bidirectional data bus

60 USB1HS_D7 Dedicated for external transceiver B idirectional data bus

61 USB1HS_D1 Dedicated for external transceiver B idirectional data bus

62 USB1HS_D2 Dedicated for external transceiver B idirectional data bus

63 USB1HS_D4 Dedicated for external transceiver B idirectional data bus

64 USB1HS_D0 Dedicated for external transceiver B idirectional data bus

65 USB1HS_NXT Dedicated for external transceiver Next signal from PHY

66 USB1HS_CLK Dedicated for external transceiver 60-MHz clock

67 GND GND

68 USB1HS_DIR Dedicated for external transceiver data form PHY

69 SYS_CLKOUT1 Configurable output clock1

10

70 LEDA LED leg A

71 LEDB LED leg B

72 ADCIN0 ADC input0 (Battery type)

73 NRESPWRON Power On Reset

74 NRESWARM Warm Boot Reset (open drain output)

75 SYSEN System enable output

76 GND GND

77 REGEN Enable signal for external LDO

78 ADCIN1 ADC input1 (General-purpose ADC input)

79 KC0 Keypad column 0

80 KC1 Keypad column 0

81 KC2 Keypad column 0

82 KC3 Keypad column 0

83 AUDIO_IN Analog microphone bias 1

84 AUDIO_OR Predriver output right P for external class-D amplifier

85 AUXR Auxiliary audio input right

86 AUDIO_OL Predriver output left P for external class-D amplifier

87 GND GND

88 VBAT Power supply (3V - 4.2V 1.5A)

89 ON/OFF Input; detect a control command to start or stop the systerm

90 VBAT Power supply (3V - 4.2V 1.5A)

Order Information

Order No. T400304

Item Embest Mini8510 Processor Card

Options Embest SBC8100 Plus Single Board Computer

Price Please contact Embest

Embest Info&Tech Co., LTD.

Room 509, Luohu Science&Technology Building,

#85 Taining Rd., Shenzhen, Guangdong, China 518020

Tel: +86-755-25635656/25636285

Fax: +86-755-25616057

Email: market@embedinfo.com

http://www.embedinfo.com/english

http://www.armkits.com