VRRM IF(AV)M IFSM V(T0) rT VDC-link = = = = = = 6000 1100 18x103 1.5 0.6 3800 V A A V m V Fast Recovery Diode 5SDF 10H6004 Doc. No. 5SYA1109-03 Jan. 10 * Patented free-floating silicon technology * Low on-state and switching losses * Optimized for use as freewheeling diode in highvoltage GTO converters * Industry standard housing * Cosmic radiation withstand rating Blocking Maximum rated values 1) Parameter Symbol Conditions Value Unit Repetitive peak reverse voltage Permanent DC voltage for 100 FIT failure rate VRRM f = 50 Hz, tp = 10ms, Tvj = 125C 6000 V VDC-link Ambient cosmic radiation at sea level in open air. (100% Duty) 3800 V max Unit Characteristic values Parameter Symbol Conditions Repetitive peak reverse current IRRM min typ VR = VRRM, Tvj = 125C 50 mA Mechanical data Maximum rated values 1) Parameter Symbol Conditions Mounting force Fm Acceleration a Acceleration a min 36 typ 40 max Unit 44 kN Device unclamped 50 m/s 2 Device clamped 200 m/s 2 Characteristic values Parameter Symbol Conditions Weight m min typ Housing thickness H 26.2 Surface creepage distance DS 30 mm Air strike distance Da 20 mm Note 1 Maximum rated values indicate limits beyond which damage to the device may occur ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. max Unit 0.83 kg 26.6 mm 5SDF 10H6004 On-state Maximum rated values 1) Parameter Symbol Conditions Max. average on-state current IF(AV)M Max. RMS on-state current IF(RMS) Max. peak non-repetitive surge current IFSM Limiting load integral I2t Max. peak non-repetitive surge current IFSM Limiting load integral I2t min typ Half sine wave, TC = 85 C max Unit 1100 A 1700 A 3 A 6 A2s 3 A 968x10 3 A2s max Unit 3 V 1.5 V 0.6 m max Unit 150 V 18x10 tp = 10 ms, Tvj = 125C, VR = 0 V 1.62x10 tp = 1 ms, Tvj = 125C, VR = 0 V 44x10 Characteristic values Parameter Symbol Conditions On-state voltage VF IF = 2500 A, Tvj = 125C Threshold voltage V(T0) Slope resistance rT Tvj = 125C IF = 200...6000 A min typ Turn-on Characteristic values Parameter Symbol Conditions Peak forward recovery voltage VFRM min typ dIF/dt = 500 A/s, Tvj = 125C Turn-off Characteristic values Parameter Symbol Conditions max Unit Reverse recovery current IRM di/dt = 300 A/s, IFQ = 1000 A, min typ 1000 A Reverse recovery charge Qrr Tj = 125C, VRM = 2900 V, 6000 C Turn-off energy Err CS = 3 F (GTO snubber circuit) 5 J ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. Doc. No. 5SYA1109-03 Jan. 10 page 2 of 6 5SDF 10H6004 Thermal Maximum rated values 1) Parameter Symbol Conditions min max Unit Operating junction temperature range Tvj -40 125 C -40 125 C Storage temperature range Tstg typ Characteristic values Parameter Symbol Conditions max Unit Double-side cooled Fm = 36...44 kN 12 K/kW Rth(j-c)A Anode-side cooled Fm = 36...44 kN 24 K/kW Rth(j-c)C Cathode-side cooled Fm = 36...44 kN 24 K/kW Double-side cooled Fm = 36...44 kN 3 K/kW Single-side cooled Fm = 36...44 kN 6 K/kW Thermal resistance junction Rth(j-c) to case Thermal resistance case to Rth(c-h) heatsink Rth(c-h) min typ Analytical function for transient thermal impedance: n Zth(j-c) (t) = R th i (1 - e-t/ i ) i =1 i 1 2 3 4 Rth i(K/kW) 7.440 2.000 1.840 0.710 i(s) 0.4700 0.0910 0.0100 0.0047 Fig. 1 Transient thermal impedance junction-to-case ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. Doc. No. 5SYA1109-03 Jan. 10 page 3 of 6 5SDF 10H6004 Fig. 2 Max. on-state voltage characteristics Fig. 3 Surge on-state current vs. pulse length. Halfsine wave Fig. 4 Forward recovery vs. turn on di/dt (max. values) ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. Doc. No. 5SYA1109-03 Jan. 10 page 4 of 6 5SDF 10H6004 VF(t), IF (t) dIF/dt -dIF/dt VFR IF (t) IF (t) QRR VF (t) VF (t) tfr t IR (t) tfr (typ) 10 s IRM VR (t) VRM Fig. 5 General current and voltage waveforms Li IF VDC-link DS RS DUT LLoad CS Fig. 6 Test circuit. ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. Doc. No. 5SYA1109-03 Jan. 10 page 5 of 6 5SDF 10H6004 Fig. 7 Outline drawing, all dimensions are in millimeters and represent nominal values unless stated otherwise Related documents: Doc. Nr Titel 5SYA 2036 Recommendations regarding mechanical clamping of Press Pack High Power Semiconductors 5SZK 9104 Specification of environmental class for pressure contact diodes, PCTs and GTO, STORAGE available on request, please contact factory 5SZK 9105 Specification of environmental class for pressure contact diodes, PCTs and GTO, TRANSPORTATION available on request, please contact factory Please refer to http://www.abb.com/semiconductors for current version of documents. ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. ABB Switzerland Ltd Semiconductors Fabrikstrasse 3 CH-5600 Lenzburg, Switzerland Telephone Fax Email Internet +41 (0)58 586 1419 +41 (0)58 586 1306 abbsem@ch.abb.com www.abb.com/semiconductors Doc. No. 5SYA1109-03 Jan. 10