3 Rev. 201610
MLCC
MLCC
MLCC MLCC
CONTENT (MLCC)
E STANDARD NUMBER ................................................................................................................................................................ 3
STRUCTURE ........................................................................................................................................................................... 4
ORDERING CODE .................................................................................................................................................................. 4
MIDDLE-HIGH VOLTAGE (100V~3KV) ................................................................................................................................. 5
NP0 SERIES .................................................................................................................................................................... 6
X7R SERIES ................................................................................................................................................................... 11
X7S SERIES ................................................................................................................................................................... 16
TEST SPEC. .................................................................................................................................................................... 17
PACKAGE .............................................................................................................................................................................. 21
OTHERS ................................................................................................................................................................................. 25
E Standard Number
E3
1.0
2.2
4.7
E6
1.0
1.5
2.2
3.3
4.7
6.8
E12
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
E24
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
4
Structure
Ordering Code
C 1608 NP0 120 J K T S △_
PRODUCT CODE
C = MLCC
SIZE in mm (EIA CODE, in inch)
0402(01005) 0603(0201) 1005 (0402) 1608 (0603) 2012 (0805)
3216 (1206) 3225(1210) 4520 (1808) 4532 (1812)
T. C.
NP0: 0 ± 30ppm/℃ -55℃ to +125℃
X7R: ±15% -55℃ to +125℃ X6S: ±22% -55℃ to +105℃
X5R: ±15% -55℃ to +85℃ Y5V: +22%/-82% -30℃ to +85℃
CAPACITANCE CODE
Expressed in pico-farads and identified by a three-digit number.
First two digits represent significant figures.
Last digit specifies the number of zeros.
(Use 9 for 1.0 through 9.9pF； Use 8 for 0.20 through 0.99pF)
TOLERANCE CODE
A: ± 0.05pF B: ± 0.1pF C: ± 0.25pF D: ± 0.5pF F: ±1% G: ±2%
J: ±5% K: ±10% M: ±20% Z: +80/-20%
VOLTAGE CODE
B: 4V C: 6.3V D: 10V E: 16V F: 25V N: 35V G: 50V H: 100V
J: 200V K: 250V L: 500V M: 630V P: 1KV Q: 2KV R: 3KV S: 4KV
PACKAGING CODE
T: Paper tape reel Ø180mm (7”) P: Embossed tape reel Ø180mm (7”)
N: Paper tape reel Ø250mm (10”) D: Embossed tape reel Ø250mm (10”)
A: Paper tape reel Ø330mm (13”) E: Embossed tape reel Ø330mm (13”)
W: Special Packing
Application Code
S: Standard Q: High Q/Low ESR F: Microwave A: Automotive infotainment with AEC-Q200
Thickness Code
Code
Thick (mm)
Code
Thick(mm)
Code
Thick (mm)
(blank)
Standard Thick
M
0.70
G
1.25
Z
0.20
D
0.80
H
1.50
A
0.30
E
0.85
L
1.60
Q
0.45
I
0.95
N
2.00
B
0.50
J
1.00
P
2.50
C
0.60
F
1.15
R
3.20
Examples:
Code
Cap (pF)
478
0.47
229
2.2
101
100
102
1000
5 REV. 201610
MLCC
Middle High Voltage
Middle-High Voltage (100V~3kV)
Feature
Application
1. A monolithic structure ensures high reliability and
mechanical strength.
2. Suitable for high speed SMT placement on PCBs.
3. RoHS compliant
4. Halogen Free
1. Input filtering circuit of modem and LAN
Interface.
2. DC-DC Converters
3. Backlighting inverters of LCD screen.
4. Switching circuit.
5. General high voltage circuit.
Standard External Dimensions
For some special parts, please see the “Part Number & Characteristic” for detail specification.
TYPE
Dimension (mm)
(EIA Size)
Kind
L (Length)
W (Width)
T (Max.)
g (Min)
A (Min/Max)
C0603
(0201)
Standard
0.6 ± 0.03
0.30 ± 0.03
0.33
0.15
0.10 / 0.20
C1005
(0402)
Standard
1.0 ± 0.05
0.50 ± 0.05
0.55
0.30
0.15 / 0.35
C1608
(0603)
Standard
1.6 ± 0.10
0.80 ± 0.10
0.90
0.50
0.25 / 0.65
Special (1)
1.6 ± 0.15
0.80 ± 0.15
0.95
0.50
0.25 / 0.65
C2012
(0805)
Standard
2.0 ± 0.15
1.25 ± 0.15
1.45
0.70
0.25 / 0.75
C3216
(1206)
Standard
3.2 ± 0.15
1.60 ± 0.15
1.80
1.50
0.25 / 0.75
C3225
(1210)
Standard
3.2 ± 0.30
2.50 ± 0.20
2.70
1.50
0.25 / 0.75
C4520
(1808)
Standard
4.6 ± 0.30
2.00 ± 0.20
2.20
1.50
0.25 / 0.75
C4532
(1812)
Standard
4.6 ± 0.30
3.20 ± 0.30
3.40
1.50
0.25 / 0.75
S 5
6
Part Number & Characteristic
NP0 Series
C1005NP0 Series (EIA0402)
Value Unit L/W Thick.
C1005NP0208□HTS C1005NP0208□HT 1V, 1MHz 0.20 pF ±0.25pF,±0.1pF,±0.05pF 0.50 ±0.05 ±0.05 0.25% (I)
C1005NP0308□HTS C1005NP0308□HT 1V, 1MHz 0.30 pF ±0.25pF,±0.1pF,±0.05pF 0.50 ±0.05 ±0.05 0.25% (I)
C1005NP0408□HTS C1005NP0408□HT 1V, 1MHz 0.40 pF ±0.25pF,±0.1pF,±0.05pF 0.50 ±0.05 ±0.05 0.25% (I)
C1005NP0508□HTS C1005NP0508□HT 1V, 1MHz 0.50 pF ±0.25pF,±0.1pF,±0.05pF 0.50 ±0.05 ±0.05 0.24% (I)
C1005NP0608□HTS C1005NP0608□HT 1V, 1MHz 0.60 pF ±0.25pF,±0.1pF,±0.05pF 0.50 ±0.05 ±0.05 0.24% (I)
C1005NP0708□HTS C1005NP0708□HT 1V, 1MHz 0.70 pF ±0.25pF,±0.1pF,±0.05pF 0.50 ±0.05 ±0.05 0.24% (I)
C1005NP0808□HTS C1005NP0808□HT 1V, 1MHz 0.80 pF ±0.25pF,±0.1pF,±0.05pF 0.50 ±0.05 ±0.05 0.24% (I)
C1005NP0908□HTS C1005NP0908□HT 1V, 1MHz 0.90 pF ±0.25pF,±0.1pF,±0.05pF 0.50 ±0.05 ±0.05 0.24% (I)
C1005NP0109□HTS C1005NP0109□HT 1V, 1MHz 1.0 pF ±0.25pF,±0.1pF,±0.05pF 0.50 ±0.05 ±0.05 0.24% (I)
C1005NP0129□HTS C1005NP0129□HT 1V, 1MHz 1.2 pF ±0.25pF,±0.1pF 0.50 ±0.05 ±0.05 0.24% (I)
C1005NP0159□HTS C1005NP0159□HT 1V, 1MHz 1.5 pF ±0.25pF,±0.1pF 0.50 ±0.05 ±0.05 0.23% (I)
C1005NP0189□HTS C1005NP0189□HT 1V, 1MHz 1.8 pF ±0.25pF,±0.1pF 0.50 ±0.05 ±0.05 0.23% (I)
C1005NP0229□HTS C1005NP0229□HT 1V, 1MHz 2.2 pF ±0.25pF,±0.1pF 0.50 ±0.05 ±0.05 0.23% (I)
C1005NP0279□HTS C1005NP0279□HT 1V, 1MHz 2.7 pF ±0.25pF,±0.1pF 0.50 ±0.05 ±0.05 0.22% (I)
C1005NP0339□HTS C1005NP0339□HT 1V, 1MHz 3.3 pF ±0.25pF,±0.1pF 0.50 ±0.05 ±0.05 0.21% (I)
C1005NP0399□HTS C1005NP0399□HT 1V, 1MHz 3.9 pF ±0.25pF,±0.1pF 0.50 ±0.05 ±0.05 0.21% (I)
C1005NP0409□HTS C1005NP0409□HT 1V, 1MHz 4.0 pF ±0.25pF,±0.1pF 0.50 ±0.05 ±0.05 0.21% (I)
C1005NP0479□HTS C1005NP0479□HT 1V, 1MHz 4.7 pF ±0.25pF,±0.1pF 0.50 ±0.05 ±0.05 0.20% (I)
C1005NP0509□HTS C1005NP0509□HT 1V, 1MHz 5.0 pF ±0.5pF,±0.25pF,±0.1pF 0.50 ±0.05 ±0.05 0.20% (I)
C1005NP0569□HTS C1005NP0569□HT 1V, 1MHz 5.6 pF ±0.5pF,±0.25pF,±0.1pF 0.50 ±0.05 ±0.05 0.20% (I)
C1005NP0689□HTS C1005NP0689□HT 1V, 1MHz 6.8 pF ±0.5pF,±0.25pF,±0.1pF 0.50 ±0.05 ±0.05 0.19% (I)
C1005NP0809□HTS C1005NP0809□HT 1V, 1MHz 8.0 pF ±0.5pF,±0.25pF,±0.1pF 0.50 ±0.05 ±0.05 0.18% (I)
C1005NP0829□HTS C1005NP0829□HT 1V, 1MHz 8.2 pF ±0.5pF,±0.25pF,±0.1pF 0.50 ±0.05 ±0.05 0.18% (I)
C1005NP0100□HTS C1005NP0100□HT 1V, 1MHz 10 pF ±5%,±2%,±1% 0.50 ±0.05 ±0.05 0.17% (I)
C1005NP0120□HTS C1005NP0120□HT 1V, 1MHz 12 pF ±5%,±2%,±1% 0.50 ±0.05 ±0.05 0.16% (I)
C1005NP0150□HTS C1005NP0150□HT 1V, 1MHz 15 pF ±5%,±2%,±1% 0.50 ±0.05 ±0.05 0.14% (I)
C1005NP0180□HTS C1005NP0180□HT 1V, 1MHz 18 pF ±5%,±2%,±1% 0.50 ±0.05 ±0.05 0.13% (I)
C1005NP0220□HTS C1005NP0220□HT 1V, 1MHz 22 pF ±5%,±2%,±1% 0.50 ±0.05 ±0.05 0.12% (I)
C1005NP0270□HTS C1005NP0270□HT 1V, 1MHz 27 pF ±5%,±2%,±1% 0.50 ±0.05 ±0.05 0.11% (I)
C1005NP0330□HTS C1005NP0330□HT 1V, 1MHz 33 pF ±5%,±2%,±1% 0.50 ±0.05 ±0.05 0.10% (I)
C1005NP0390□HTS C1005NP0390□HT 1V, 1MHz 39 pF ±5%,±2%,±1% 0.50 ±0.05 ±0.05 0.10% (I)
C1005NP0470□HTS C1005NP0470□HT 1V, 1MHz 47 pF ±5%,±2%,±1% 0.50 ±0.05 ±0.05 0.10% (I)
C1005NP0560□HTS C1005NP0560□HT 1V, 1MHz 56 pF ±5%,±2%,±1% 0.50 ±0.05 ±0.05 0.10% (I)
C1005NP0680□HTS C1005NP0680□HT 1V, 1MHz 68 pF ±5%,±2%,±1% 0.50 ±0.05 ±0.05 0.10% (I)
C1005NP0820□HTS C1005NP0820□HT 1V, 1MHz 82 pF ±5%,±2%,±1% 0.50 ±0.05 ±0.05 0.10% (I)
C1005NP0101□HTS C1005NP0101□HT 1V, 1MHz 100 pF ±5%,±2%,±1% 0.50 ±0.05 ±0.05 0.10% (I)
C1005NP0121JHTS C1005NP0121JHT
1V, 1MHz 120 pF ±5% 0.50 ±0.05 ±0.05 0.10% (I)
C1005NP0151JHTS C1005NP0151JHT
1V, 1MHz 150 pF ±5% 0.50 ±0.05 ±0.05 0.10% (I)
C1005NP0181JHTS C1005NP0181JHT
1V, 1MHz 180 pF ±5% 0.50 ±0.05 ±0.05 0.10% (I)
C1005NP0221JHTS C1005NP0221JHT
1V, 1MHz 220 pF ±5% 0.50 ±0.05 ±0.05 0.10% (I)
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
Test
Spec.
100V
Paper, 10Kpcs
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Capacitance
Available Tolerance
C1608NP0 Series (EIA0603)
Value Unit L/W Thick.
C1608NP0109□KTS C1608NP0109□KT 1V, 1MHz 1.0 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.24% (I)
C1608NP0129□KTS C1608NP0129□KT 1V, 1MHz 1.2 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.24% (I)
C1608NP0159□KTS C1608NP0159□KT 1V, 1MHz 1.5 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.23% (I)
C1608NP0189□KTS C1608NP0189□KT 1V, 1MHz 1.8 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.23% (I)
C1608NP0229□KTS C1608NP0229□KT 1V, 1MHz 2.2 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.23% (I)
C1608NP0279□KTS C1608NP0279□KT 1V, 1MHz 2.7 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.22% (I)
C1608NP0339□KTS C1608NP0339□KT 1V, 1MHz 3.3 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.21% (I)
C1608NP0399□KTS C1608NP0399□KT 1V, 1MHz 3.9 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.21% (I)
C1608NP0479□KTS C1608NP0479□KT 1V, 1MHz 4.7 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.20% (I)
C1608NP0569□KTS C1608NP0569□KT 1V, 1MHz 5.6 pF ±0.5pF,±0.25pF 0.80 ±0.10 ±0.10 0.20% (I)
C1608NP0689□KTS C1608NP0689□KT 1V, 1MHz 6.8 pF ±0.5pF,±0.25pF 0.80 ±0.10 ±0.10 0.19% (I)
C1608NP0829□KTS C1608NP0829□KT 1V, 1MHz 8.2 pF ±0.5pF,±0.25pF 0.80 ±0.10 ±0.10 0.18% (I)
C1608NP0100JKTS C1608NP0100JKT 1V, 1MHz 10 pF ±5% 0.80 ±0.10 ±0.10 0.17% (I)
C1608NP0120JKTS C1608NP0120JKT 1V, 1MHz 12 pF ±5% 0.80 ±0.10 ±0.10 0.16% (I)
C1608NP0150JKTS C1608NP0150JKT 1V, 1MHz 15 pF ±5% 0.80 ±0.10 ±0.10 0.14% (I)
C1608NP0180JKTS C1608NP0180JKT 1V, 1MHz 18 pF ±5% 0.80 ±0.10 ±0.10 0.13% (I)
C1608NP0220JKTS C1608NP0220JKT 1V, 1MHz 22 pF ±5% 0.80 ±0.10 ±0.10 0.12% (I)
C1608NP0270JKTS C1608NP0270JKT 1V, 1MHz 27 pF ±5% 0.80 ±0.10 ±0.10 0.11% (I)
C1608NP0330JKTS C1608NP0330JKT 1V, 1MHz 33 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0390JKTS C1608NP0390JKT 1V, 1MHz 39 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0470JKTS C1608NP0470JKT 1V, 1MHz 47 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0560JKTS C1608NP0560JKT 1V, 1MHz 56 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0680JKTS C1608NP0680JKT 1V, 1MHz 68 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0820JKTS C1608NP0820JKT 1V, 1MHz 82 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0101JKTS C1608NP0101JKT 1V, 1MHz 100 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
Test
Spec.
250V
Paper, 4Kpcs
Capacitance
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
7 REV. 201610
MLCC
Middle High Voltage
Value Unit L/W Thick.
C1608NP0121JKTS C1608NP0121JKT 1V, 1MHz 120 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0151JKTS C1608NP0151JKT 1V, 1MHz 150 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0181JKTS C1608NP0181JKT 1V, 1MHz 180 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0221JKTS C1608NP0221JKT 1V, 1MHz 220 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0271JKTS C1608NP0271JKT 1V, 1MHz 270 pF ±5% 0.80 ±0.15 ±0.15 0.10% (I)
C1608NP0331JKTS C1608NP0331JKT 1V, 1MHz 330 pF ±5% 0.80 ±0.15 ±0.15 0.10% (I)
C1608NP0391JKTS C1608NP0391JKT 1V, 1MHz 390 pF ±5% 0.80 ±0.15 ±0.15 0.10% (I)
C1608NP0471JKTS C1608NP0471JKT 1V, 1MHz 470 pF ±5% 0.80 ±0.15 ±0.15 0.10% (I)
200V C1608NP0221JJTS C1608NP0221JJT 1V, 1MHz 220 pF ±5% 0.80 ±0.10 ±0.10 0.10% Paper, 4Kpcs (I)
C1608NP0308□HTS C1608NP0308□HT 1V, 1MHz 0.30 pF ±0.25pF,±0.1pF,±0.05pF 0.80 ±0.10 ±0.10 0.25% (I)
C1608NP0408□HTS C1608NP0408□HT 1V, 1MHz 0.40 pF ±0.25pF,±0.1pF,±0.05pF 0.80 ±0.10 ±0.10 0.25% (I)
C1608NP0508□HTS C1608NP0508□HT 1V, 1MHz 0.50 pF ±0.25pF,±0.1pF,±0.05pF 0.80 ±0.10 ±0.10 0.24% (I)
C1608NP0608□HTS C1608NP0608□HT 1V, 1MHz 0.60 pF ±0.25pF,±0.1pF,±0.05pF 0.80 ±0.10 ±0.10 0.24% (I)
C1608NP0708□HTS C1608NP0708□HT 1V, 1MHz 0.70 pF ±0.25pF,±0.1pF,±0.05pF 0.80 ±0.10 ±0.10 0.24% (I)
C1608NP0758□HTS C1608NP0758□HT 1V, 1MHz 0.75 pF ±0.25pF,±0.1pF,±0.05pF 0.80 ±0.10 ±0.10 0.24% (I)
C1608NP0808□HTS C1608NP0808□HT 1V, 1MHz 0.80 pF ±0.25pF,±0.1pF,±0.05pF 0.80 ±0.10 ±0.10 0.24% (I)
C1608NP0908□HTS C1608NP0908□HT 1V, 1MHz 0.90 pF ±0.25pF,±0.1pF,±0.05pF 0.80 ±0.10 ±0.10 0.24% (I)
C1608NP0109□HTS C1608NP0109□HT 1V, 1MHz 1.0 pF ±0.25pF,±0.1pF,±0.05pF 0.80 ±0.10 ±0.10 0.24% (I)
C1608NP0129□HTS C1608NP0129□HT 1V, 1MHz 1.2 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.24% (I)
C1608NP0159□HTS C1608NP0159□HT 1V, 1MHz 1.5 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.23% (I)
C1608NP0189□HTS C1608NP0189□HT 1V, 1MHz 1.8 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.23% (I)
C1608NP0209□HTS C1608NP0209□HT 1V, 1MHz 2.0 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.23% (I)
C1608NP0229□HTS C1608NP0229□HT 1V, 1MHz 2.2 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.23% (I)
C1608NP0249□HTS C1608NP0249□HT 1V, 1MHz 2.4 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.22% (I)
C1608NP0279□HTS C1608NP0279□HT 1V, 1MHz 2.7 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.22% (I)
C1608NP0309□HTS C1608NP0309□HT 1V, 1MHz 3.0 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.22% (I)
C1608NP0339□HTS C1608NP0339□HT 1V, 1MHz 3.3 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.21% (I)
C1608NP0399□HTS C1608NP0399□HT 1V, 1MHz 3.9 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.21% (I)
C1608NP0409□HTS C1608NP0409□HT 1V, 1MHz 4.0 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.21% (I)
C1608NP0439□HTS C1608NP0439□HT 1V, 1MHz 4.3 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.21% (I)
C1608NP0479□HTS C1608NP0479□HT 1V, 1MHz 4.7 pF ±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.20% (I)
C1608NP0509□HTS C1608NP0509□HT 1V, 1MHz 5.0 pF ±0.5pF,±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.20% (I)
C1608NP0569□HTS C1608NP0569□HT 1V, 1MHz 5.6 pF ±0.5pF,±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.20% (I)
C1608NP0609□HTS C1608NP0609□HT 1V, 1MHz 6.0 pF ±0.5pF,±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.19% (I)
C1608NP0629□HTS C1608NP0629□HT 1V, 1MHz 6.2 pF ±0.5pF,±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.19% (I)
C1608NP0689□HTS C1608NP0689□HT 1V, 1MHz 6.8 pF ±0.5pF,±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.19% (I)
C1608NP0709□HTS C1608NP0709□HT 1V, 1MHz 7.0 pF ±0.5pF,±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.19% (I)
C1608NP0829□HTS C1608NP0829□HT 1V, 1MHz 8.2 pF ±0.5pF,±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.18% (I)
C1608NP0909□HTS C1608NP0909□HT 1V, 1MHz 9.0 pF ±0.5pF,±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.17% (I)
C1608NP0919□HTS C1608NP0919□HT 1V, 1MHz 9.1 pF ±0.5pF,±0.25pF,±0.1pF 0.80 ±0.10 ±0.10 0.17% (I)
C1608NP0100□HTS C1608NP0100□HT 1V, 1MHz 10 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.17% (I)
C1608NP0110□HTS C1608NP0110□HT 1V, 1MHz 11 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.16% (I)
C1608NP0120□HTS C1608NP0120□HT 1V, 1MHz 12 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.16% (I)
C1608NP0150□HTS C1608NP0150□HT 1V, 1MHz 15 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.14% (I)
C1608NP0180□HTS C1608NP0180□HT 1V, 1MHz 18 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.13% (I)
C1608NP0200□HTS C1608NP0200□HT 1V, 1MHz 20 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.13% (I)
C1608NP0220□HTS C1608NP0220□HT 1V, 1MHz 22 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.12% (I)
C1608NP0240□HTS C1608NP0240□HT 1V, 1MHz 24 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.11% (I)
C1608NP0270□HTS C1608NP0270□HT 1V, 1MHz 27 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.11% (I)
C1608NP0300□HTS C1608NP0300□HT 1V, 1MHz 30 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0330□HTS C1608NP0330□HT 1V, 1MHz 33 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0360□HTS C1608NP0360□HT 1V, 1MHz 36 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0390□HTS C1608NP0390□HT 1V, 1MHz 39 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0430□HTS C1608NP0430□HT 1V, 1MHz 43 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0470□HTS C1608NP0470□HT 1V, 1MHz 47 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0560□HTS C1608NP0560□HT 1V, 1MHz 56 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0620□HTS C1608NP0620□HT 1V, 1MHz 62 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0680□HTS C1608NP0680□HT 1V, 1MHz 68 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0750□HTS C1608NP0750□HT 1V, 1MHz 75 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0820□HTS C1608NP0820□HT 1V, 1MHz 82 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0910□HTS C1608NP0910□HT 1V, 1MHz 91 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0101□HTS C1608NP0101□HT 1V, 1MHz 100 pF ±5%,±2%,±1% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0121JHTS C1608NP0121JHT
1V, 1MHz 120 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0151JHTS C1608NP0151JHT
1V, 1MHz 150 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0181JHTS C1608NP0181JHT
1V, 1MHz 180 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0201JHTS C1608NP0201JHT
1V, 1MHz 200 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0221JHTS C1608NP0221JHT
1V, 1MHz 220 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0271JHTS C1608NP0271JHT
1V, 1MHz 270 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0331JHTS C1608NP0331JHT
1V, 1MHz 330 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0391JHTS C1608NP0391JHT
1V, 1MHz 390 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0471JHTS C1608NP0471JHT
1V, 1MHz 470 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0561JHTS C1608NP0561JHT
1V, 1MHz 560 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0681JHTS C1608NP0681JHT
1V, 1MHz 680 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0821JHTS C1608NP0821JHT
1V, 1MHz 820 pF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
C1608NP0102JHTS C1608NP0102JHT 1V, 1MHz 1.0 nF ±5% 0.80 ±0.10 ±0.10 0.10% (I)
100V
Paper, 4Kpcs
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
Test
Spec.
250V
Paper, 4Kpcs
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Capacitance
Available Tolerance
8
C2012NP0 Series (EIA0805)
Value Unit L/W Thick.
C2012NP0100JPPSG C2012NP0100JPP
1V,1MHz 10 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.17% (I)
C2012NP0120JPPSG C2012NP0120JPP
1V,1MHz 12 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.16% (I)
C2012NP0150JPPSG C2012NP0150JPP
1V,1MHz 15 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.14% (I)
C2012NP0180JPPSG C2012NP0180JPP
1V,1MHz 18 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.13% (I)
C2012NP0220JPPSG C2012NP0220JPP
1V,1MHz 22 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.12% (I)
C2012NP0270JPPSG C2012NP0270JPP
1V,1MHz 27 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.11% (I)
C2012NP0330JPPSG C2012NP0330JPP
1V,1MHz 33 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0390JPPSG C2012NP0390JPP
1V,1MHz 39 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0470JPPSG C2012NP0470JPP
1V,1MHz 47 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0560JPPSG C2012NP0560JPP
1V,1MHz 56 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0680JPPSG C2012NP0680JPP 1V,1MHz 68 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0100JMTSC C2012NP0100JMT
1V,1MHz 10 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.17% (I)
C2012NP0120JMTSC C2012NP0120JMT
1V,1MHz 12 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.16% (I)
C2012NP0150JMTSC C2012NP0150JMT
1V,1MHz 15 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.14% (I)
C2012NP0180JMTSC C2012NP0180JMT
1V,1MHz 18 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.13% (I)
C2012NP0220JMTSC C2012NP0220JMT
1V,1MHz 22 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.12% (I)
C2012NP0270JMTSC C2012NP0270JMT
1V,1MHz 27 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.11% (I)
C2012NP0330JMTSC C2012NP0330JMT
1V,1MHz 33 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0390JMTSC C2012NP0390JMT
1V,1MHz 39 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0470JMTSC C2012NP0470JMT
1V,1MHz 47 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0560JMTSC C2012NP0560JMT
1V,1MHz 56 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0680JMTSC C2012NP0680JMT
1V,1MHz 68 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0101JMTSD C2012NP0101JMT
1V,1MHz 100 pF ±5% 0.80 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0221JMPSG C2012NP0221JMP
1V,1MHz 220 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0471JMPSG C2012NP0471JMP
1V,1MHz 470 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0102JMPSG C2012NP0102JMP 1V,1MHz 1.0 nF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0100JLTSC C2012NP0100JLT
1V,1MHz 10 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.17% (I)
C2012NP0220JLTSC C2012NP0220JLT
1V,1MHz 22 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.12% (I)
C2012NP0470JLTSC C2012NP0470JLT
1V,1MHz 47 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0101JLTSD C2012NP0101JLT
1V,1MHz 100 pF ±5% 0.80 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0221JLPSG C2012NP0221JLP
1V,1MHz 220 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0471JLPSG C2012NP0471JLP
1V,1MHz 470 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0102JLPSG C2012NP0102JLP 1V,1MHz 1.0 nF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0100JKTSC C2012NP0100JKT
1V,1MHz 10 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.17% (I)
C2012NP0120JKTSC C2012NP0120JKT
1V,1MHz 12 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.16% (I)
C2012NP0150JKTSC C2012NP0150JKT
1V,1MHz 15 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.14% (I)
C2012NP0180JKTSC C2012NP0180JKT
1V,1MHz 18 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.13% (I)
C2012NP0220JKTSC C2012NP0220JKT
1V,1MHz 22 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.12% (I)
C2012NP0270JKTSC C2012NP0270JKT
1V,1MHz 27 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.11% (I)
C2012NP0330JKTSC C2012NP0330JKT
1V,1MHz 33 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0390JKTSC C2012NP0390JKT
1V,1MHz 39 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0470JKTSC C2012NP0470JKT
1V,1MHz 47 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0560JKTSC C2012NP0560JKT
1V,1MHz 56 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0680JKTSC C2012NP0680JKT
1V,1MHz 68 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0820JKTSC C2012NP0820JKT
1V,1MHz 82 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0101JKTSD C2012NP0101JKT
1V,1MHz 100 pF ±5% 0.80 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0121JKTSD C2012NP0121JKT
1V,1MHz 120 pF ±5% 0.80 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0151JKPSG C2012NP0151JKP
1V,1MHz 150 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0221JKPSG C2012NP0221JKP
1V,1MHz 220 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0271JKPSG C2012NP0271JKP
1V,1MHz 270 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0331JKPSG C2012NP0331JKP
1V,1MHz 330 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0561JKPSG C2012NP0561JKP 1V,1MHz 560 pF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0100JHTSC C2012NP0100JHT
1V, 1MHz 10 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.17% (I)
C2012NP0120JHTSC C2012NP0120JHT
1V, 1MHz 12 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.16% (I)
C2012NP0150JHTSC C2012NP0150JHT
1V, 1MHz 15 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.14% (I)
C2012NP0180JHTSC C2012NP0180JHT
1V, 1MHz 18 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.13% (I)
C2012NP0200JHTSC C2012NP0200JHT
1V, 1MHz 20 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.13% (I)
C2012NP0220JHTSC C2012NP0220JHT
1V, 1MHz 22 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.12% (I)
C2012NP0240JHTSC C2012NP0240JHT
1V, 1MHz 24 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.11% (I)
C2012NP0270JHTSC C2012NP0270JHT
1V, 1MHz 27 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.11% (I)
C2012NP0300JHTSC C2012NP0300JHT
1V, 1MHz 30 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0330JHTSC C2012NP0330JHT
1V, 1MHz 33 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0360JHTSC C2012NP0360JHT
1V, 1MHz 36 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0390JHTSC C2012NP0390JHT
1V, 1MHz 39 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0430JHTSC C2012NP0430JHT
1V, 1MHz 43 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0470JHTSC C2012NP0470JHT
1V, 1MHz 47 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0560JHTSC C2012NP0560JHT
1V, 1MHz 56 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0620JHTSC C2012NP0620JHT
1V, 1MHz 62 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0680JHTSC C2012NP0680JHT
1V, 1MHz 68 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0750JHTSC C2012NP0750JHT
1V, 1MHz 75 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0820JHTSC C2012NP0820JHT
1V, 1MHz 82 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0101JHTSC C2012NP0101JHT
1V, 1MHz 100 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0121JHTSC C2012NP0121JHT
1V, 1MHz 120 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0151JHTSC C2012NP0151JHT
1V, 1MHz 150 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0181JHTSC C2012NP0181JHT
1V, 1MHz 180 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0201JHTSC C2012NP0201JHT
1V, 1MHz 200 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0221JHTSC C2012NP0221JHT 1V, 1MHz 220 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
100V
Paper, 4Kpcs
250V
Paper, 4Kpcs
Embossed, 3Kpcs
630V
Paper, 4Kpcs
Embossed, 3Kpcs
500V
Paper, 4Kpcs
Embossed, 3Kpcs
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
Test
Spec.
1000V
Emobssed, 3Kpcs
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Capacitance
Available Tolerance
9 REV. 201610
MLCC
Middle High Voltage
Value Unit L/W Thick.
C2012NP0271JHTSC C2012NP0271JHT
1V, 1MHz 270 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0331JHTSC C2012NP0331JHT
1V, 1MHz 330 pF ±5% 0.60 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0391JHTSD C2012NP0391JHT
1V, 1MHz 390 pF ±5% 0.80 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0471JHTSD C2012NP0471JHT
1V, 1MHz 470 pF ±5% 0.80 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0561JHTSD C2012NP0561JHT
1V, 1MHz 560 pF ±5% 0.80 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0681JHTSD C2012NP0681JHT
1V, 1MHz 680 pF ±5% 0.80 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0821JHTSD C2012NP0821JHT
1V, 1MHz 820 pF ±5% 0.80 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0102JHTSD C2012NP0102JHT
1V, 1MHz 1.0 nF ±5% 0.80 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0122JHTSD C2012NP0122JHT
1V, 1kHz 1.2 nF ±5% 0.80 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0152JHTSD C2012NP0152JHT
1V, 1kHz 1.5 nF ±5% 0.80 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0182JHTSD C2012NP0182JHT
1V, 1kHz 1.8 nF ±5% 0.80 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0222JHTSD C2012NP0222JHT
1V, 1kHz 2.2 nF ±5% 0.80 ±0.15/±0.10 ±0.10 0.10% (I)
C2012NP0272JHPSG C2012NP0272JHP
1V, 1kHz 2.7 nF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
C2012NP0332JHPSG C2012NP0332JHP 1V, 1kHz 3.3 nF ±5% 1.25 ±0.15/±0.10 ±0.20 0.10% (I)
Paper, 4Kpcs
100V
DARFON P/N
DARFON P/N 2
Measuring
Condition
Capacitance
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Test
Spec.
Standard
Packing
Embossed, 3Kpcs
RV
C3216NP0 Series (EIA1206)
Value Unit L/W Thick.
C3216NP0339CQTSD C3216NP0339CQT
1V,1MHz 3.3 pF ±0.25pF 0.80 ±0.15 ±0.10 0.21% (I)
C3216NP0100JQTSD C3216NP0100JQT
1V,1MHz 10 pF ±5% 0.80 ±0.15 ±0.10 0.17% (I)
C3216NP0220JQTSD C3216NP0220JQT
1V,1MHz 22 pF ±5% 0.80 ±0.15 ±0.10 0.12% (I)
C3216NP0470JQPSI C3216NP0470JQP
1V,1MHz 47 pF ±5% 0.95 ±0.15 ±0.10 0.10% (I)
C3216NP0101JQPSG C3216NP0101JQP
1V,1MHz 100 pF ±5% 1.25 ±0.15 ±0.10 0.10% (I)
C3216NP0221JQPSL C3216NP0221JQP 1V,1MHz 220 pF ±5% 1.60 ±0.20 ±0.20 0.10% Embossed,2Kpcs (I)
C3216NP0100JPTSD C3216NP0100JPT
1V,1MHz 10 pF ±5% 0.80 ±0.15 ±0.10 0.17% (I)
C3216NP0120JPTSD C3216NP0120JPT
1V,1MHz 12 pF ±5% 0.80 ±0.15 ±0.10 0.16% (I)
C3216NP0150JPTSD C3216NP0150JPT
1V,1MHz 15 pF ±5% 0.80 ±0.15 ±0.10 0.14% (I)
C3216NP0180JPTSD C3216NP0180JPT
1V,1MHz 18 pF ±5% 0.80 ±0.15 ±0.10 0.13% (I)
C3216NP0220JPTSD C3216NP0220JPT
1V,1MHz 22 pF ±5% 0.80 ±0.15 ±0.10 0.12% (I)
C3216NP0270JPTSD C3216NP0270JPT
1V,1MHz 27 pF ±5% 0.80 ±0.15 ±0.10 0.11% (I)
C3216NP0330JPTSD C3216NP0330JPT
1V,1MHz 33 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0390JPTSD C3216NP0390JPT
1V,1MHz 39 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0470JPPSI C3216NP0470JPP
1V,1MHz 47 pF ±5% 0.95 ±0.15 ±0.10 0.10% (I)
C3216NP0560JPPSI C3216NP0560JPP
1V,1MHz 56 pF ±5% 0.95 ±0.15 ±0.10 0.10% (I)
C3216NP0680JPPSI C3216NP0680JPP
1V,1MHz 68 pF ±5% 0.95 ±0.15 ±0.10 0.10% (I)
C3216NP0820JPPSG C3216NP0820JPP
1V,1MHz 82 pF ±5% 1.25 ±0.15 ±0.20 0.10% (I)
C3216NP0101JPPSG C3216NP0101JPP
1V,1MHz 100 pF ±5% 1.25 ±0.15 ±0.20 0.10% (I)
C3216NP0121JPPSG C3216NP0121JPP
1V,1MHz 120 pF ±5% 1.25 ±0.15 ±0.20 0.10% (I)
C3216NP0151JPPSG C3216NP0151JPP
1V,1MHz 150 pF ±5% 1.25 ±0.15 ±0.20 0.10% (I)
C3216NP0181JPPSL C3216NP0181JPP
1V,1MHz 180 pF ±5% 1.60 ±0.15 ±0.20 0.10% (I)
C3216NP0221JPPSL C3216NP0221JPP
1V,1MHz 220 pF ±5% 1.60 ±0.15 ±0.20 0.10% (I)
C3216NP0271JPPSL C3216NP0271JPP
1V,1MHz 270 pF ±5% 1.60 ±0.20 ±0.20 0.10% (I)
C3216NP0331JPPSL C3216NP0331JPP
1V,1MHz 330 pF ±5% 1.60 ±0.20 ±0.20 0.10% (I)
C3216NP0391JPPSL C3216NP0391JPP
1V,1MHz 390 pF ±5% 1.60 ±0.20 ±0.20 0.10% (I)
C3216NP0471JPPSL C3216NP0471JPP
1V,1MHz 470 pF ±5% 1.60 ±0.20 ±0.20 0.10% (I)
C3216NP0561JPPSL C3216NP0561JPP
1V,1MHz 560 pF ±5% 1.60 ±0.20 ±0.20 0.10% (I)
C3216NP0102JPPSL C3216NP0102JPP 1V,1MHz 1.0 nF ±5% 1.60 ±0.20 ±0.20 0.10% (I)
C3216NP0100JMTSD C3216NP0100JMT
1V,1MHz 10 pF ±5% 0.80 ±0.15 ±0.10 0.17% (I)
C3216NP0150JMTSD C3216NP0150JMT
1V,1MHz 15 pF ±5% 0.80 ±0.15 ±0.10 0.14% (I)
C3216NP0220JMTSD C3216NP0220JMT
1V,1MHz 22 pF ±5% 0.80 ±0.15 ±0.10 0.12% (I)
C3216NP0270JMTSD C3216NP0270JMT
1V,1MHz 27 pF ±5% 0.80 ±0.15 ±0.10 0.11% (I)
C3216NP0330JMTSD C3216NP0330JMT
1V,1MHz 33 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0470JMTSD C3216NP0470JMT
1V,1MHz 47 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0560JMTSD C3216NP0560JMT
1V,1MHz 56 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0680JMTSD C3216NP0680JMT
1V,1MHz 68 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0820JMTSD C3216NP0820JMT
1V,1MHz 82 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0101JMTSD C3216NP0101JMT
1V,1MHz 100 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0121JMTSD C3216NP0121JMT
1V,1MHz 120 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0151JMTSD C3216NP0151JMT
1V,1MHz 150 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0181JMTSD C3216NP0181JMT
1V,1MHz 180 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0221JMTSD C3216NP0221JMT
1V,1MHz 220 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0271JMPSI C3216NP0271JMP
1V,1MHz 270 pF ±5% 0.95 ±0.15 ±0.10 0.10% (I)
C3216NP0331JMPSI C3216NP0331JMP
1V,1MHz 330 pF ±5% 0.95 ±0.15 ±0.10 0.10% (I)
C3216NP0391JMPSI C3216NP0391JMP
1V,1MHz 390 pF ±5% 0.95 ±0.15 ±0.10 0.10% (I)
C3216NP0471JMPSI C3216NP0471JMP
1V,1MHz 470 pF ±5% 0.95 ±0.15 ±0.10 0.10% (I)
C3216NP0102JMPSL C3216NP0102JMP
1V,1MHz 1.0 nF ±5% 1.60 ±0.30/±0.20 ±0.20 0.10% (I)
C3216NP0222JMPSL C3216NP0222JMP 1V,1kHz 2.2 nF ±5% 1.60 ±0.30/±0.20 ±0.20 0.10% (I)
C3216NP0100JLTSD C3216NP0100JLT
1V,1MHz 10 pF ±5% 0.80 ±0.15 ±0.10 0.17% (I)
C3216NP0220JLTSD C3216NP0220JLT
1V,1MHz 22 pF ±5% 0.80 ±0.15 ±0.10 0.12% (I)
C3216NP0470JLTSD C3216NP0470JLT
1V,1MHz 47 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0101JLTSD C3216NP0101JLT
1V,1MHz 100 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0221JLTSD C3216NP0221JLT
1V,1MHz 220 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0471JLPSI C3216NP0471JLP
1V,1MHz 470 pF ±5% 0.95 ±0.15 ±0.10 0.10% Embossed,3Kpcs (I)
C3216NP0102JLPSL C3216NP0102JLP 1V,1MHz 1.0 nF ±5% 1.60 ±0.30/±0.20 ±0.20 0.10% (I)
C3216NP0222JLPSL C3216NP0222JLP 1V,1MHz 2.2 nF ±5% 1.60 ±0.30/±0.20 ±0.20 0.10% (I)
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
630V
Paper,4Kpcs
Embossed,3Kpcs
Embossed,2Kpcs
500V
Paper, 4Kpcs
Embossed,2Kpcs
Test
Spec.
2000V
Paper, 4Kpcs
Embossed,3Kpcs
1000V
Paper, 4Kpcs
Embossed,3Kpcs
Embossed,3Kpcs
Embossed,2Kpcs
Capacitance
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
10
Value Unit L/W Thick.
C3216NP0121JKTSD C3216NP0121JKT
1V,1MHz 120 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0151JKTSD C3216NP0151JKT
1V,1MHz 150 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0181JKTSD C3216NP0181JKT
1V,1MHz 180 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0221JKTSD C3216NP0221JKT
1V,1MHz 220 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0271JKPSI C3216NP0271JKP
1V,1MHz 270 pF ±5% 0.95 ±0.15 ±0.10 0.10% (I)
C3216NP0331JKPSI C3216NP0331JKP
1V,1MHz 330 pF ±5% 0.95 ±0.15 ±0.10 0.10% (I)
C3216NP0391JKPSI C3216NP0391JKP
1V,1MHz 390 pF ±5% 0.95 ±0.15 ±0.10 0.10% (I)
C3216NP0471JKPSI C3216NP0471JKP 1V,1MHz 470 pF ±5% 0.95 ±0.15 ±0.10 0.10% (I)
200V C3216NP0102JJPSI C3216NP0102JJP 1V, 1MHz 1.0 nF ±5% 0.95 ±0.15 ±0.10 0.10% Embossed,3Kpcs (I)
C3216NP0100JHTSD C3216NP0100JHT
1V, 1MHz 10 pF ±5% 0.80 ±0.15 ±0.10 0.17% (I)
C3216NP0120JHTSD C3216NP0120JHT
1V, 1MHz 12 pF ±5% 0.80 ±0.15 ±0.10 0.16% (I)
C3216NP0150JHTSD C3216NP0150JHT
1V, 1MHz 15 pF ±5% 0.80 ±0.15 ±0.10 0.14% (I)
C3216NP0180JHTSD C3216NP0180JHT
1V, 1MHz 18 pF ±5% 0.80 ±0.15 ±0.10 0.13% (I)
C3216NP0220JHTSD C3216NP0220JHT
1V, 1MHz 22 pF ±5% 0.80 ±0.15 ±0.10 0.12% (I)
C3216NP0270JHTSD C3216NP0270JHT
1V, 1MHz 27 pF ±5% 0.80 ±0.15 ±0.10 0.11% (I)
C3216NP0330JHTSD C3216NP0330JHT
1V, 1MHz 33 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0390JHTSD C3216NP0390JHT
1V, 1MHz 39 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0470JHTSD C3216NP0470JHT
1V, 1MHz 47 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0560JHTSD C3216NP0560JHT
1V, 1MHz 56 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0680JHTSD C3216NP0680JHT
1V, 1MHz 68 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0820JHTSD C3216NP0820JHT
1V, 1MHz 82 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0101JHTSD C3216NP0101JHT
1V, 1MHz 100 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0121JHTSD C3216NP0121JHT
1V, 1MHz 120 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0151JHTSD C3216NP0151JHT
1V, 1MHz 150 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0181JHTSD C3216NP0181JHT
1V, 1MHz 180 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0221JHTSD C3216NP0221JHT
1V, 1MHz 220 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0271JHTSD C3216NP0271JHT
1V, 1MHz 270 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0331JHTSD C3216NP0331JHT
1V, 1MHz 330 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0391JHTSD C3216NP0391JHT
1V, 1MHz 390 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0471JHTSD C3216NP0471JHT
1V, 1MHz 470 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0561JHTSD C3216NP0561JHT
1V, 1MHz 560 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0681JHTSD C3216NP0681JHT
1V, 1MHz 680 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0821JHTSD C3216NP0821JHT
1V, 1MHz 820 pF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0102JHTSD C3216NP0102JHT
1V, 1MHz 1.0 nF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0122JHTSD C3216NP0122JHT
1V, 1kHz 1.2 nF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0152JHTSD C3216NP0152JHT
1V, 1kHz 1.5 nF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0182JHTSD C3216NP0182JHT
1V, 1kHz 1.8 nF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0222JHTSD C3216NP0222JHT
1V, 1kHz 2.2 nF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0272JHTSD C3216NP0272JHT
1V, 1kHz 2.7 nF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0332JHTSD C3216NP0332JHT
1V, 1kHz 3.3 nF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0392JHTSD C3216NP0392JHT
1V, 1kHz 3.9 nF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0472JHTSD C3216NP0472JHT
1V, 1kHz 4.7 nF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0562JHTSD C3216NP0562JHT
1V, 1kHz 5.6 nF ±5% 0.80 ±0.15 ±0.10 0.10% (I)
C3216NP0682JHPSI C3216NP0682JHP
1V, 1kHz 6.8 nF ±5% 0.95 ±0.15 ±0.10 0.10% (I)
C3216NP0822JHPSG C3216NP0822JHP
1V, 1kHz 8.2 nF ±5% 1.25 ±0.15 ±0.20 0.10% (I)
C3216NP0103JHPSG C3216NP0103JHP
1V, 1kHz 10 nF ±5% 1.25 ±0.15 ±0.20 0.10% (I)
C3216NP0333JHTSD C3216NP0333JHT
1V, 1kHz 33 nF ±5% 0.80 ±0.15 ±0.15 0.10% Paper,4Kpcs (I)
C3216NP0473JHPSF C3216NP0473JHP 1V, 1kHz 47 nF ±5% 1.15 ±0.15 ±0.15 0.10% Embossed,3Kpcs (I)
Embossed,3Kpcs
Capacitance
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
250V
Paper,4Kpcs
Embossed,3Kpcs
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Test
Spec.
100V
Paper,4Kpcs
C3225NP0Series (EIA1210)
Value Unit L/W Thick.
1000V C3225NP0331JPPSL C3225NP0331JPP 1V,1MHz 330 pF ±5% 1.60 ±0.40/±0.30 ±0.20 0.10% Embossed, 2Kpcs (I)
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Test
Spec.
Capacitance
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
C4520NP0Series (EIA1808)
Value Unit L/W Thick.
C4520NP0509DRPSG C4520NP0509DRP
1V,1MHz 5.0 pF ±0.5pF 1.25 +0.5-0.3/±0.3 ±0.20 0.20% (I)
C4520NP0100JRPSG C4520NP0100JRP
1V,1MHz 10 pF ±5% 1.25 +0.5-0.3/±0.3 ±0.20 0.17% (I)
C4520NP0470JRPSG C4520NP0470JRP
1V,1MHz 47 pF ±5% 1.25 +0.5-0.3/±0.3 ±0.20 0.10% (I)
C4520NP0560□RPSG C4520NP0560□RP 1V,1MHz 56 pF ±5%,±2% 1.25 +0.5-0.3/±0.3 ±0.20 0.10% (I)
C4520NP0101JRPSG C4520NP0101JRP
1V,1MHz 100 pF ±5% 1.25 +0.5-0.3/±0.3 ±0.20 0.10% Embossed, 3Kpcs (I)
C4520NP0101JRPSN C4520NP0101JRP 1V,1MHz 100 pF ±5% 2.00 +0.5-0.3/±0.3 ±0.20 0.10% Embossed, 1Kpcs (I)
C4520NP0180JQPSG C4520NP0180JQP
1V,1MHz 18 pF ±5% 1.25 +0.5-0.3/±0.3 ±0.20 0.13% (I)
C4520NP0101JQPSG C4520NP0101JQP 1V,1MHz 100 pF ±5% 1.25 +0.5-0.3/±0.3 ±0.20 0.10% (I)
C4520NP0330JPPSG C4520NP0330JPP
1V,1MHz 33 pF ±5% 1.25 +0.5-0.3/±0.3 ±0.20 0.10% Embossed, 2Kpcs (I)
C4520NP0681JPPSN C4520NP0681JPP 1V,1MHz 680 pF ±5% 2.00 +0.5-0.3/±0.3 ±0.20 0.10% Embossed, 1Kpcs (I)
Tolerance(mm)
DF
(max.)
Standard
Packing
Test
Spec.
3000V
Embossed, 2Kpcs
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Capacitance
Available Tolerance
Thick.
(mm)
2000V
Embossed, 2Kpcs
1000V
C4532NP0Series (EIA1812)
Value Unit L/W Thick.
2000V C4532NP0102KQPSN C4520NP0102KQP 1V , 1kHz 1.0 nF ±10% 2.00 +0.5-0.3/±0.30 ±0.20 0.10% Embossed, 1Kpcs (I)
Tolerance(mm)
DF
(max.)
Standard
Packing
Test
Spec.
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Capacitance
Available Tolerance
Thick.
(mm)
□ Tolerance Code: A=±0.05 pF, B=±0.1pF, C=±0.25pF ,D=±0.5pF, G=±2%, J=±5%; Special tolerance on the request.
11 REV. 201610
MLCC
Middle High Voltage
X7R Series
C1005X7R Series (EIA0402)
Value Unit L/W Thick.
C1005X7R101KHTS C1005X7R101KHT 1V , 1kHz 100 pF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R121KHTS C1005X7R121KHT 1V , 1kHz 120 pF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R151KHTS C1005X7R151KHT 1V , 1kHz 150 pF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R181KHTS C1005X7R181KHT 1V , 1kHz 180 pF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R221KHTS C1005X7R221KHT 1V , 1kHz 220 pF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R271KHTS C1005X7R271KHT 1V , 1kHz 270 pF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R331KHTS C1005X7R331KHT 1V , 1kHz 330 pF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R391KHTS C1005X7R391KHT 1V , 1kHz 390 pF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R471KHTS C1005X7R471KHT 1V , 1kHz 470 pF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R561KHTS C1005X7R561KHT 1V , 1kHz 560 pF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R681KHTS C1005X7R681KHT 1V , 1kHz 680 pF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R821KHTS C1005X7R821KHT 1V , 1kHz 820 pF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R102KHTS C1005X7R102KHT 1V , 1kHz 1.0 nF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R122KHTS C1005X7R122KHT 1V , 1kHz 1.2 nF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R152KHTS C1005X7R152KHT 1V , 1kHz 1.5 nF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R182KHTS C1005X7R182KHT 1V , 1kHz 1.8 nF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R222KHTS C1005X7R222KHT 1V , 1kHz 2.2 nF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R272KHTS C1005X7R272KHT 1V , 1kHz 2.7 nF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R332KHTS C1005X7R332KHT 1V , 1kHz 3.3 nF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R392KHTS C1005X7R392KHT 1V , 1kHz 3.9 nF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R472KHTS C1005X7R472KHT 1V , 1kHz 4.7 nF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R562KHTS C1005X7R562KHT 1V , 1kHz 5.6 nF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
C1005X7R682KHTS C1005X7R682KHT 1V , 1kHz 6.8 nF ±10% 0.50 ±0.05 ±0.05 3.0% (I)
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Capacitance
100V
Paper, 10Kpcs
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
Test
Spec.
C1608X7R Series (EIA0603)
Value Unit L/W Thick.
C1608X7R101KKTS C1608X7R101KKT
1V, 1kHz 100 pF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R121KKTS C1608X7R121KKT
1V, 1kHz 120 pF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R151KKTS C1608X7R151KKT
1V, 1kHz 150 pF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R181KKTS C1608X7R181KKT
1V, 1kHz 180 pF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R221KKTS C1608X7R221KKT
1V, 1kHz 220 pF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R271KKTS C1608X7R271KKT
1V, 1kHz 270 pF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R331KKTS C1608X7R331KKT
1V, 1kHz 330 pF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R391KKTS C1608X7R391KKT
1V, 1kHz 390 pF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R471KKTS C1608X7R471KKT
1V, 1kHz 470 pF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R561KKTS C1608X7R561KKT
1V, 1kHz 560 pF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R681KKTS C1608X7R681KKT
1V, 1kHz 680 pF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R821KKTS C1608X7R821KKT
1V, 1kHz 820 pF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R102KKTS C1608X7R102KKT
1V, 1kHz 1.0 nF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R122KKTS C1608X7R122KKT
1V, 1kHz 1.2 nF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R152KKTS C1608X7R152KKT
1V, 1kHz 1.5 nF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R182KKTS C1608X7R182KKT
1V, 1kHz 1.8 nF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R222KKTS C1608X7R222KKT
1V, 1kHz 2.2 nF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R272KKTS C1608X7R272KKT
1V, 1kHz 2.7 nF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R332KKTS C1608X7R332KKT
1V, 1kHz 3.3 nF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R392KKTS C1608X7R392KKT
1V, 1kHz 3.9 nF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R472KKTS C1608X7R472KKT
1V, 1kHz 4.7 nF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R562KKTS C1608X7R562KKT
1V, 1kHz 5.6 nF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R682KKTS C1608X7R682KKT
1V, 1kHz 6.8 nF ±10% 0.80 ±0.10 ±0.10 2.5% (I)
C1608X7R103KKTS C1608X7R103KKT 1V, 1kHz 10 nF ±10% 0.80 ±0.15 ±0.15 2.5% (I)
200V C1608X7R331KJTS C1608X7R331KJT 1V, 1kHz 330 pF ±10% 0.80 ±0.10 ±0.10 2.5% Paper, 4Kpcs (I)
C1608X7R101KHTS C1608X7R101KHT 1V , 1kHz 100 pF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R121KHTS C1608X7R121KHT 1V , 1kHz 120 pF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R151KHTS C1608X7R151KHT 1V , 1kHz 150 pF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R181KHTS C1608X7R181KHT 1V , 1kHz 180 pF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R221KHTS C1608X7R221KHT 1V , 1kHz 220 pF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R271KHTS C1608X7R271KHT 1V , 1kHz 270 pF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R331KHTS C1608X7R331KHT 1V , 1kHz 330 pF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R391KHTS C1608X7R391KHT 1V , 1kHz 390 pF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R471KHTS C1608X7R471KHT 1V , 1kHz 470 pF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R561KHTS C1608X7R561KHT 1V , 1kHz 560 pF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R681KHTS C1608X7R681KHT 1V , 1kHz 680 pF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R821KHTS C1608X7R821KHT 1V , 1kHz 820 pF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R102KHTS C1608X7R102KHT 1V , 1kHz 1.0 nF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R122KHTS C1608X7R122KHT 1V , 1kHz 1.2 nF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R152KHTS C1608X7R152KHT 1V , 1kHz 1.5 nF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R182KHTS C1608X7R182KHT 1V , 1kHz 1.8 nF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
Paper, 4Kpcs
100V
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
Test
Spec.
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Capacitance
250V
Paper, 4Kpcs
12
Value Unit L/W Thick.
C1608X7R222KHTS C1608X7R222KHT 1V , 1kHz 2.2 nF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R272KHTS C1608X7R272KHT 1V , 1kHz 2.7 nF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R332KHTS C1608X7R332KHT 1V , 1kHz 3.3 nF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R392KHTS C1608X7R392KHT 1V , 1kHz 3.9 nF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R472KHTS C1608X7R472KHT 1V , 1kHz 4.7 nF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R562KHTS C1608X7R562KHT 1V , 1kHz 5.6 nF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R682KHTS C1608X7R682KHT 1V , 1kHz 6.8 nF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R822KHTS C1608X7R822KHT 1V , 1kHz 8.2 nF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R103KHTS C1608X7R103KHT 1V , 1kHz 10 nF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R223KHTS C1608X7R223KHT 1V , 1kHz 22 nF ±10% 0.80 ±0.10 ±0.10 3.0% (I)
C1608X7R473KHTS C1608X7R473KHT 1V , 1kHz 47 nF ±10% 0.80 ±0.15 ±0.15 3.0% (I)
C1608X7R104KHTS C1608X7R104KHT 1V , 1kHz 100 nF ±10% 0.80 ±0.15 ±0.15 10.0% (I)
DARFON P/N
DARFON P/N 2
Measuring
Condition
Capacitance
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Test
Spec.
RV
Standard
Packing
100V
Paper, 4Kpcs
C2012X7R Series (EIA0805)
Value Unit L/W Thick.
C2012X7R101KMTSD C2012X7R101KMT
1V, 1kHz 100 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R181KMTSD C2012X7R181KMT
1V, 1kHz 180 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R221KMTSD C2012X7R221KMT
1V, 1kHz 220 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R271KMTSD C2012X7R271KMT
1V, 1kHz 270 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R331KMTSD C2012X7R331KMT
1V, 1kHz 330 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R391KMTSD C2012X7R391KMT
1V, 1kHz 390 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R471KMTSD C2012X7R471KMT
1V, 1kHz 470 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R561KMTSD C2012X7R561KMT
1V, 1kHz 560 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R681KMTSD C2012X7R681KMT
1V, 1kHz 680 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R821KMTSD C2012X7R821KMT
1V, 1kHz 820 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R102KMTSD C2012X7R102KMT
1V, 1kHz 1.0 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R122KMTSD C2012X7R122KMT
1V, 1kHz 1.2 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R152KMTSD C2012X7R152KMT
1V, 1kHz 1.5 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R182KMTSD C2012X7R182KMT
1V, 1kHz 1.8 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R222KMTSD C2012X7R222KMT
1V, 1kHz 2.2 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R272KMTSD C2012X7R272KMT
1V, 1kHz 2.7 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R332KMTSD C2012X7R332KMT
1V, 1kHz 3.3 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R472KMPSG C2012X7R472KMP
1V, 1kHz 4.7 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C2012X7R103KMPSG C2012X7R103KMP
1V, 1kHz 10 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C2012X7R223KMPSG C2012X7R223KMP 1V, 1kHz 22 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C2012X7R101KLTSD C2012X7R101KLT
1V, 1kHz 100 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R181KLTSD C2012X7R181KLT
1V, 1kHz 180 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R221KLTSD C2012X7R221KLT
1V, 1kHz 220 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R271KLTSD C2012X7R271KLT
1V, 1kHz 270 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R331KLTSD C2012X7R331KLT
1V, 1kHz 330 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R471KLTSD C2012X7R471KLT
1V, 1kHz 470 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R561KLTSD C2012X7R561KLT
1V, 1kHz 560 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R681KLTSD C2012X7R681KLT
1V, 1kHz 680 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R102KLTSD C2012X7R102KLT
1V, 1kHz 1.0 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R222KLTSD C2012X7R222KLT
1V, 1kHz 2.2 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R272KLTSD C2012X7R272KLT
1V, 1kHz 2.7 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R472KLPSG C2012X7R472KLP
1V, 1kHz 4.7 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C2012X7R103KLPSG C2012X7R103KLP
1V, 1kHz 10 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C2012X7R223KLPSG C2012X7R223KLP 1V, 1kHz 22 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C2012X7R181KKTSD C2012X7R181KKT
1V, 1kHz 180 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R221KKTSD C2012X7R221KKT
1V, 1kHz 220 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R331KKTSD C2012X7R331KKT
1V, 1kHz 330 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R471KKTSD C2012X7R471KKT
1V, 1kHz 470 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R561KKTSD C2012X7R561KKT
1V, 1kHz 560 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R681KKTSD C2012X7R681KKT
1V, 1kHz 680 pF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R102KKTSD C2012X7R102KKT
1V, 1kHz 1.0 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R152KKTSD C2012X7R152KKT
1V, 1kHz 1.5 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R222KKTSD C2012X7R222KKT
1V, 1kHz 2.2 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R332KKTSD C2012X7R332KKT
1V, 1kHz 3.3 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R392KKTSD C2012X7R392KKT
1V, 1kHz 3.9 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R472KKTSD C2012X7R472KKT
1V, 1kHz 4.7 nF ±10% 0.80 ±0.15 ±0.10 2.5% (I)
C2012X7R562KKPSG C2012X7R562KKP
1V, 1kHz 5.6 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C2012X7R682KKPSG C2012X7R682KKP
1V, 1kHz 6.8 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C2012X7R822KKPSG C2012X7R822KKP
1V, 1kHz 8.2 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C2012X7R103KKPSG C2012X7R103KKP
1V, 1kHz 10 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C2012X7R123KKPSG C2012X7R123KKP 1V, 1kHz 12 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Test
Spec.
630V
Paper, 4Kpcs
Embossed, 3Kpcs
500V
Paper, 4Kpcs
Embossed, 3Kpcs
Capacitance
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
250V
Paper, 4Kpcs
Embossed, 3Kpcs
13 REV. 201610
MLCC
Middle High Voltage
Value Unit L/W Thick.
C2012X7R151KHTSD C2012X7R151KHT 1V , 1kHz 150 pF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R181KHTSD C2012X7R181KHT 1V , 1kHz 180 pF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R221KHTSD C2012X7R221KHT 1V , 1kHz 220 pF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R271KHTSD C2012X7R271KHT 1V , 1kHz 270 pF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R331KHTSD C2012X7R331KHT 1V , 1kHz 330 pF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R391KHTSD C2012X7R391KHT 1V , 1kHz 390 pF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R471KHTSD C2012X7R471KHT 1V , 1kHz 470 pF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R561KHTSD C2012X7R561KHT 1V , 1kHz 560 pF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R681KHTSD C2012X7R681KHT 1V , 1kHz 680 pF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R821KHTSD C2012X7R821KHT 1V , 1kHz 820 pF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R102KHTSD C2012X7R102KHT 1V , 1kHz 1.0 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R122KHTSD C2012X7R122KHT 1V , 1kHz 1.2 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R152KHTSD C2012X7R152KHT 1V , 1kHz 1.5 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R182KHTSD C2012X7R182KHT 1V , 1kHz 1.8 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R222KHTSD C2012X7R222KHT 1V , 1kHz 2.2 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R272KHTSD C2012X7R272KHT 1V , 1kHz 2.7 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R332KHTSD C2012X7R332KHT 1V , 1kHz 3.3 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R392KHTSD C2012X7R392KHT 1V , 1kHz 3.9 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R472KHTSD C2012X7R472KHT 1V , 1kHz 4.7 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R562KHTSD C2012X7R562KHT 1V , 1kHz 5.6 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R682KHTSD C2012X7R682KHT 1V , 1kHz 6.8 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R822KHTSD C2012X7R822KHT 1V , 1kHz 8.2 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R103KHTSD C2012X7R103KHT 1V , 1kHz 10 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R123KHTSD C2012X7R123KHT 1V , 1kHz 12 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R153KHTSD C2012X7R153KHT 1V , 1kHz 15 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R183KHTSD C2012X7R183KHT 1V , 1kHz 18 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R223KHTSD C2012X7R223KHT 1V , 1kHz 22 nF ±10% 0.80 ±0.15 ±0.10 3.0% (I)
C2012X7R333KHPSG C2012X7R333KHP 1V , 1kHz 33 nF ±10% 1.25 ±0.15/±0.10 ±0.10 2.5% (I)
C2012X7R473KHPSG C2012X7R473KHP 1V , 1kHz 47 nF ±10% 1.25 ±0.15/±0.10 ±0.10 2.5% (I)
C2012X7R563KHPSG C2012X7R563KHP 1V , 1kHz 56 nF ±10% 1.25 ±0.15/±0.10 ±0.10 2.5% (I)
C2012X7R683KHPSG C2012X7R683KHP 1V , 1kHz 68 nF ±10% 1.25 ±0.15/±0.10 ±0.10 2.5% (I)
C2012X7R823KHPSG C2012X7R823KHP 1V , 1kHz 82 nF ±10% 1.25 ±0.15/±0.10 ±0.10 2.5% (I)
C2012X7R104KHPSG C2012X7R104KHP 1V , 1kHz 100 nF ±10% 1.25 ±0.20 ±0.20 5.0% (I)
C2012X7R224KHPSJ C2012X7R224KHP 1V , 1kHz 220 nF ±10% 1.00 ±0.20 ±0.10 2.5% (II)
C2012X7R224KHPSG C2012X7R224KHP 1V , 1kHz 220 nF ±10% 1.25 ±0.20 ±0.20 5.0% (I)
C2012X7R474KHPSG C2012X7R474KHP 1V , 1kHz 470 nF ±10% 1.25 ±0.20 ±0.20 5.0% (II)
Test
Spec.
RV
Standard
Packing
DARFON P/N
DARFON P/N 2
100V
Paper, 4Kpcs
Embossed, 3Kpcs
Measuring
Condition
Capacitance
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
C3216X7R Series (EIA1206)
Value Unit L/W Thick.
C3216X7R101KQPSG C3216X7R101KQP
1V, 1kHz 100 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R151KQPSG C3216X7R151KQP
1V, 1kHz 150 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R181KQPSG C3216X7R181KQP
1V, 1kHz 180 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R221KQPSG C3216X7R221KQP
1V, 1kHz 220 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R271KQPSG C3216X7R271KQP
1V, 1kHz 270 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R331KQPSG C3216X7R331KQP
1V, 1kHz 330 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R471KQPSG C3216X7R471KQP
1V, 1kHz 470 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R561KQPSG C3216X7R561KQP
1V, 1kHz 560 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R681KQPSG C3216X7R681KQP
1V, 1kHz 680 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R821KQPSG C3216X7R821KQP
1V, 1kHz 820 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R821KQPSL C3216X7R821KQP
1V, 1kHz 820 pF ±10% 1.60 ±0.30 ±0.20 2.5% Embossed, 2Kpcs (I)
C3216X7R102KQPSG C3216X7R102KQP
1V, 1kHz 1.0 nF ±10% 1.25 ±0.30 ±0.20 2.5% Embossed, 3Kpcs (I)
C3216X7R102KQPSL C3216X7R102KQP
1V, 1kHz 1.0 nF ±10% 1.60 ±0.30 ±0.20 2.5% (I)
C3216X7R122KQPSL C3216X7R122KQP
1V, 1kHz 1.2 nF ±10% 1.60 ±0.30 ±0.20 2.5% (I)
C3216X7R152KQPSL C3216X7R152KQP
1V, 1kHz 1.5 nF ±10% 1.60 ±0.30 ±0.20 2.5% (I)
C3216X7R182KQPSL C3216X7R182KQP
1V, 1kHz 1.8 nF ±10% 1.60 ±0.30 ±0.20 2.5% (I)
C3216X7R222KQPSL C3216X7R222KQP
1V, 1kHz 2.2 nF ±10% 1.60 ±0.30 ±0.20 2.5% (I)
C3216X7R222KQPSG C3216X7R222KQP
1V, 1kHz 2.2 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R332KQPSG C3216X7R332KQP
1V, 1kHz 3.3 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R472□QPSL C3216X7R472□QP 1V, 1kHz 4.7 nF ±10% , ±20% 1.60 ±0.30 ±0.20 2.5% Embossed, 2Kpcs (I)
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Test
Spec.
2000V
Embossed, 3Kpcs
Embossed, 2Kpcs
Capacitance
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
Embossed, 3Kpcs
□ Tolerance Code: J=±5%, K=±10%, M=±20%; Special tolerance on the request.
14
Value Unit L/W Thick.
C3216X7R101KPPSG C3216X7R101KPP
1V, 1kHz 100 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R151KPPSG C3216X7R151KPP
1V, 1kHz 150 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R181KPPSG C3216X7R181KPP
1V, 1kHz 180 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R221KPPSG C3216X7R221KPP
1V, 1kHz 220 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R271KPPSG C3216X7R271KPP
1V, 1kHz 270 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R331KPPSG C3216X7R331KPP
1V, 1kHz 330 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R391KPPSG C3216X7R391KPP
1V, 1kHz 390 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R471KPPSG C3216X7R471KPP
1V, 1kHz 470 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R561KPPSG C3216X7R561KPP
1V, 1kHz 560 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R681KPPSG C3216X7R681KPP
1V, 1kHz 680 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R821KPPSG C3216X7R821KPP
1V, 1kHz 820 pF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R102KPPSG C3216X7R102KPP
1V, 1kHz 1.0 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R122KPPSG C3216X7R122KPP
1V, 1kHz 1.2 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R152KPPSG C3216X7R152KPP
1V, 1kHz 1.5 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R182KPPSG C3216X7R182KPP
1V, 1kHz 1.8 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R222KPPSG C3216X7R222KPP
1V, 1kHz 2.2 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R272KPPSG C3216X7R272KPP
1V, 1kHz 2.7 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R332KPPSG C3216X7R332KPP
1V, 1kHz 3.3 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R392KPPSG C3216X7R392KPP
1V, 1kHz 3.9 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R472KPPSG C3216X7R472KPP
1V, 1kHz 4.7 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R562KPPSG C3216X7R562KPP
1V, 1kHz 5.6 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R682KPPSG C3216X7R682KPP
1V, 1kHz 6.8 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R822KPPSG C3216X7R822KPP
1V, 1kHz 8.2 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R103KPPSG C3216X7R103KPP 1V, 1kHz 10 nF ±10% 1.25 ±0.30 ±0.20 2.5% (I)
C3216X7R101KMPSG C3216X7R101KMP
1V, 1kHz 100 pF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R181KMPSG C3216X7R181KMP
1V, 1kHz 180 pF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R221KMPSG C3216X7R221KMP
1V, 1kHz 220 pF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R271KMPSG C3216X7R271KMP
1V, 1kHz 270 pF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R331KMPSG C3216X7R331KMP
1V, 1kHz 330 pF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R391KMPSG C3216X7R391KMP
1V, 1kHz 390 pF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R471KMPSG C3216X7R471KMP
1V, 1kHz 470 pF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R561KMPSG C3216X7R561KMP
1V, 1kHz 560 pF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R681KMPSG C3216X7R681KMP
1V, 1kHz 680 pF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R821KMPSG C3216X7R821KMP
1V, 1kHz 820 pF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R102KMPSG C3216X7R102KMP
1V, 1kHz 1.0 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R122KMPSG C3216X7R122KMP
1V, 1kHz 1.2 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R152KMPSG C3216X7R152KMP
1V, 1kHz 1.5 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R182KMPSG C3216X7R182KMP
1V, 1kHz 1.8 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R222KMPSG C3216X7R222KMP
1V, 1kHz 2.2 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R272KMPSG C3216X7R272KMP
1V, 1kHz 2.7 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R332KMPSG C3216X7R332KMP
1V, 1kHz 3.3 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R392KMPSG C3216X7R392KMP
1V, 1kHz 3.9 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R472KMPSG C3216X7R472KMP
1V, 1kHz 4.7 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R562KMPSG C3216X7R562KMP
1V, 1kHz 5.6 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R682KMPSG C3216X7R682KMP
1V, 1kHz 6.8 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R822KMPSG C3216X7R822KMP
1V, 1kHz 8.2 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R103KMPSG C3216X7R103KMP
1V, 1kHz 10 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R123KMPSG C3216X7R123KMP
1V, 1kHz 12 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R153KMPSG C3216X7R153KMP
1V, 1kHz 15 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R183KMPSG C3216X7R183KMP
1V, 1kHz 18 nF ±10% 1.25 ±0.15 ±0.20 2.5% (II)
C3216X7R223KMPSL C3216X7R223KMP
1V, 1kHz 22 nF ±10% 1.60 ±0.30/±0.20 ±0.20 2.5% (II)
C3216X7R273KMPSL C3216X7R273KMP
1V, 1kHz 27 nF ±10% 1.60 ±0.30/±0.20 ±0.20 2.5% (II)
C3216X7R333KMPSL C3216X7R333KMP
1V, 1kHz 33 nF ±10% 1.60 ±0.30/±0.20 ±0.20 2.5% (II)
C3216X7R473KMPSL C3216X7R473KMP 1V, 1kHz 47 nF ±10% 1.60 ±0.30/±0.20 ±0.20 2.5% (II)
C3216X7R101KLPSG C3216X7R101KLP
1V, 1kHz 100 pF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R181KLPSG C3216X7R181KLP
1V, 1kHz 180 pF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R221KLPSG C3216X7R221KLP
1V, 1kHz 220 pF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R471KLPSG C3216X7R471KLP
1V, 1kHz 470 pF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R102KLPSG C3216X7R102KLP
1V, 1kHz 1.0 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R222KLPSG C3216X7R222KLP
1V, 1kHz 2.2 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R272KLPSG C3216X7R272KLP
1V, 1kHz 2.7 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R332KLPSG C3216X7R332KLP
1V, 1kHz 3.3 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R392KLPSG C3216X7R392KLP
1V, 1kHz 3.9 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R472KLPSG C3216X7R472KLP
1V, 1kHz 4.7 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R682KLPSG C3216X7R682KLP
1V, 1kHz 6.8 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R103KLPSG C3216X7R103KLP
1V, 1kHz 10 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R223KLPSL C3216X7R223KLP
1V, 1kHz 22 nF ±10% 1.60 ±0.30/±0.20 ±0.20 2.5% (I)
C3216X7R473KLPSL C3216X7R473KLP 1V, 1kHz 47 nF ±10% 1.60 ±0.30/±0.20 ±0.20 2.5% (I)
C3216X7R181KKPSG C3216X7R181KKP
1V, 1kHz 180 pF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R221KKPSG C3216X7R221KKP
1V, 1kHz 220 pF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R471KKPSG C3216X7R471KKP
1V, 1kHz 470 pF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R561KKPSG C3216X7R561KKP
1V, 1kHz 560 pF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R102KKPSG C3216X7R102KKP
1V, 1kHz 1.0 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R222KKPSG C3216X7R222KKP
1V, 1kHz 2.2 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R472KKPSG C3216X7R472KKP
1V, 1kHz 4.7 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R472KKTSE C3216X7R472KKT
1V, 1kHz 4.7 nF ±10% 0.85 ±0.15 ±0.15 2.5% Paper, 4Kpcs (I)
C3216X7R103KKPSG C3216X7R103KKP
1V, 1kHz 10 nF ±10% 1.25 ±0.15 ±0.20 2.5% Embossed, 3Kpcs (I)
C3216X7R103KKTSE C3216X7R103KKT
1V, 1kHz 10 nF ±10% 0.85 ±0.15 ±0.15 2.5% Paper, 4Kpcs (I)
C3216X7R153KKPSG C3216X7R153KKP
1V, 1kHz 15 nF ±10% 1.25 ±0.15 ±0.20 2.5% Embossed, 3Kpcs (I)
C3216X7R223KKPSG C3216X7R223KKP
1V, 1kHz 22 nF ±10% 1.25 ±0.15 ±0.20 2.5% Embossed, 3Kpcs (I)
C3216X7R473KKPSL C3216X7R473KKP
1V, 1kHz 47 nF ±10% 1.60 ±0.20 ±0.20 2.5% (I)
C3216X7R104KKPSL C3216X7R104KKP 1V, 1kHz 100 nF ±10% 1.60 ±0.20 ±0.20 2.5% (I)
Test
Spec.
1000V
Embossed, 3Kpcs
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Capacitance
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
630V
Embossed, 3Kpcs
Embossed, 2Kpcs
500V
Embossed, 3Kpcs
Embossed, 2Kpcs
250V
Embossed, 3Kpcs
Embossed, 2Kpcs
15 REV. 201610
MLCC
Middle High Voltage
Value Unit L/W Thick.
C3216X7R102KJTSE C3216X7R102KJT
1V, 1kHz 1.0 nF ±10% 0.85 ±0.15 ±0.15 2.5% Paper, 4Kpcs (I)
C3216X7R102KJPSG C3216X7R102KJP
1V, 1kHz 1.0 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R332KJPSG C3216X7R332KJP
1V, 1kHz 3.3 nF ±10% 1.25 ±0.15 ±0.20 2.5% (I)
C3216X7R473KJPSL C3216X7R473KJP 1V, 1kHz 47 nF ±10% 1.60 ±0.20 ±0.20 2.5% Embossed, 2Kpcs (I)
C3216X7R102KHPSG C3216X7R102KHP 1V, 1kHz 1 nF ±10% 1.25 ±0.15 ±0.20 2.5%
Embossed, 3Kpcs (I)
C3216X7R103KHTSD C3216X7R103KHT 1V , 1kHz 10 nF ±10% 0.80 ±0.15 ±0.10 3.5% (I)
C3216X7R123KHTSD C3216X7R123KHT 1V , 1kHz 12 nF ±10% 0.80 ±0.15 ±0.10 3.5% (I)
C3216X7R153KHTSD C3216X7R153KHT 1V , 1kHz 15 nF ±10% 0.80 ±0.15 ±0.10 3.5% (I)
C3216X7R183KHTSD C3216X7R183KHT 1V , 1kHz 18 nF ±10% 0.80 ±0.15 ±0.10 3.5% (I)
C3216X7R223KHTSD C3216X7R223KHT 1V , 1kHz 22 nF ±10% 0.80 ±0.15 ±0.10 3.5% (I)
C3216X7R273KHTSD C3216X7R273KHT 1V , 1kHz 27 nF ±10% 0.80 ±0.15 ±0.10 3.5% (I)
C3216X7R333KHTSD C3216X7R333KHT 1V , 1kHz 33 nF ±10% 0.80 ±0.15 ±0.10 3.5% (I)
C3216X7R393KHTSD C3216X7R393KHT 1V , 1kHz 39 nF ±10% 0.80 ±0.15 ±0.10 3.5% (I)
C3216X7R473KHTSD C3216X7R473KHT 1V , 1kHz 47 nF ±10% 0.80 ±0.15 ±0.10 3.5% (I)
C3216X7R563KHTSD C3216X7R563KHT 1V , 1kHz 56 nF ±10% 0.80 ±0.15 ±0.10 3.5% (I)
C3216X7R683KHTSD C3216X7R683KHT 1V , 1kHz 68 nF ±10% 0.80 ±0.15 ±0.10 3.5% (I)
C3216X7R823KHTSD C3216X7R823KHT 1V , 1kHz 82 nF ±10% 0.80 ±0.15 ±0.10 3.5% (I)
C3216X7R823KHPSG C3216X7R823KHP 1V , 1kHz 82 nF ±10% 1.25 ±0.15 ±0.10 3.5%
Embossed, 3Kpcs (I)
C3216X7R104KHTSD C3216X7R104KHT 1V , 1kHz 100 nF ±10% 0.80 ±0.15 ±0.10 3.5%
Paper, 4Kpcs (I)
C3216X7R104KHPSG C3216X7R104KHP 1V , 1kHz 100 nF ±10% 1.25 ±0.15 ±0.10 3.5%
Embossed, 3Kpcs (I)
C3216X7R154KHPSL C3216X7R154KHP 1V , 1kHz 150 nF ±10% 1.60 ±0.20 ±0.20 2.5% (I)
C3216X7R224KHPSL C3216X7R224KHP 1V , 1kHz 220 nF ±10% 1.60 ±0.20 ±0.20 2.5% (I)
C3216X7R474KHPSL C3216X7R474KHP 1V , 1kHz 470 nF ±10% 1.60 ±0.20 ±0.20 3.0% (I)
C3216X7R105KHPSL C3216X7R105KHP 1V , 1kHz 1.0 uF ±10% 1.60 ±0.30 ±0.30 10.0% (I)
C3216X7R225KHPSL C3216X7R225KHP 1V , 1kHz 2.2 uF ±10% 1.60 ±0.30 ±0.30 10.0% (II)
Test
Spec.
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Capacitance
200V
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
Embossed, 3Kpcs
100V
Paper, 4Kpcs
Embossed, 2Kpcs
C3225X7R Series (EIA1210)
Value Unit L/W Thick.
C3225X7R102KQPSG C3225X7R102KQP 1V, 1kHz 1.0 nF ±10% 1.25 ±0.40/±0.30 ±0.20 2.50% Embossed, 3Kpcs (I)
C3225X7R222KQPSN C3225X7R222KQP 1V, 1kHz 2.2 nF ±10% 2.00 ±0.40/±0.30 ±0.20 2.50% Embossed, 2Kpcs (I)
C3225X7R472□QPSP C3225X7R472□QP 1V, 1kHz 4.7 nF ±10% , ±20% 2.50 ±0.40/±0.30 ±0.30 2.50% Embossed, 1Kpcs (I)
1000V C3225X7R103KPPSL C3225X7R103KPP 1V, 1kHz 10 nF ±10% 1.60 ±0.40/±0.30 ±0.20 2.50% Embossed, 1Kpcs (I)
C3225X7R102KMPSG C3225X7R102KMP
1V, 1kHz 1.0 nF ±10% 1.25 ±0.30/±0.20 ±0.20 2.50% (I)
C3225X7R222KMPSG C3225X7R222KMP
1V, 1kHz 2.2 nF ±10% 1.25 ±0.30/±0.20 ±0.20 2.50% (I)
C3225X7R472KMPSG C3225X7R472KMP
1V, 1kHz 4.7 nF ±10% 1.25 ±0.30/±0.20 ±0.20 2.50% (I)
C3225X7R103KMPSG C3225X7R103KMP
1V, 1kHz 10 nF ±10% 1.25 ±0.30/±0.20 ±0.20 2.50% (I)
C3225X7R223KMPSG C3225X7R223KMP
1V, 1kHz 22 nF ±10% 1.25 ±0.30/±0.20 ±0.20 2.50% (I)
C3225X7R473KMPSL C3225X7R473KMP
1V, 1kHz 47 nF ±10% 1.60 ±0.40/±0.30 ±0.20 2.50% (I)
C3225X7R683KMPSL C3225X7R683KMP 1V, 1kHz 68 nF ±10% 1.60 ±0.40/±0.30 ±0.20 2.50% (I)
C3225X7R103KLPSG C3225X7R103KLP
1V, 1kHz 10 nF ±10% 1.25 ±0.30/±0.20 ±0.20 2.50% Embossed, 3Kpcs (I)
C3225X7R223KLPSG C3225X7R223KLP
1V, 1kHz 22 nF ±10% 1.25 ±0.30/±0.20 ±0.20 2.50% Embossed, 3Kpcs (I)
C3225X7R104KLPSN C3225X7R104KLP 1V, 1kHz 100 nF ±10% 2.00 ±0.40/±0.30 ±0.20 2.50% Embossed, 2Kpcs (I)
C3225X7R224KKPSP C3225X7R224KKP
1V, 1kHz 220 nF ±10% 2.50 ±0.40/±0.30 ±0.30 2.50% (I)
C3225X7R274KKPSP C3225X7R274KKP
1V, 1kHz 270 nF ±10% 2.50 ±0.40/±0.30 ±0.30 2.50% (I)
C3225X7R474KKPSP C3225X7R474KKP 1V, 1kHz 470 nF ±10% 2.50 ±0.40/±0.30 ±0.30 2.50% (I)
C3225X7R104KHPSI C3225X7R104KHP
1V , 1kHz 100 nF ±10% 0.95 ±0.30/±0.20 ±0.10 2.50% Embossed, 3Kpcs (I)
C3225X7R474KHPSI C3225X7R474KHP
1V , 1kHz 470 nF ±10% 0.95 ±0.30/±0.20 +0.15/-0.10 2.50% Embossed, 3Kpcs (II)
C3225X7R474KHPSP C3225X7R474KHP
1V , 1kHz 470 nF ±10% 2.50 ±0.30/±0.20 ±0.30 3.00% (I)
C3225X7R564KHPSP C3225X7R564KHP
1V , 1kHz 560 nF ±10% 2.50 ±0.30/±0.20 ±0.30 3.00% (I)
C3225X7R824KHWSN C3225X7R824KHW
1V , 1kHz 820 nF ±10% 2.00 ±0.40/±0.30 ±0.20 3.00% (I)
C3225X7R105KHPSN C3225X7R105KHP 1V , 1kHz 1.0 uF ±10% 2.00 ±0.30/±0.20 ±0.20 10.0% (I)
C3225X7R225KHPSN C3225X7R225KHP 1V , 1kHz 2.2 uF ±10% 2.00 ±0.30/±0.20 ±0.20 10.0% (I)
C3225X7R225KHPSP C3225X7R225KHP 1V , 1kHz 2.2 uF ±10% 2.50 ±0.30/±0.20 ±0.20 5.0% Embossed, 1Kpcs (I)
Test
Spec.
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Capacitance
2000V
630V
Embossed, 3Kpcs
Embossed, 2Kpcs
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
500V
250V
Embossed, 1Kpcs
100V
Embossed, 1Kpcs
Embossed, 2Kpcs
C4520X7R Series (EIA1808)
Value Unit L/W Thick.
C4520X7R102KRPSG C4520X7R102KRP
1V, 1kHz 1.0 nF ±10% 1.25 ±0.30/±0.20 ±0.20 2.50% Embossed, 3Kpcs (I)
C4520X7R102KRPSN C4520X7R102KRP 1V, 1kHz 1.0 nF ±10% 2.00 ±0.40/±0.30 ±0.20 2.50% Embossed, 1Kpcs (I)
C4520X7R102KQPSG C4520X7R102KQP
1V, 1kHz 1.0 nF ±10% 1.25 ±0.40/±0.30 ±0.20 2.50% Embossed, 2Kpcs (I)
C4520X7R102KQPSN C4520X7R102KQP
1V, 1kHz 1.0 nF ±10% 2.00 ±0.40/±0.30 ±0.20 2.50% Embossed, 1Kpcs (I)
C4520X7R152KQPSN C4520X7R152KQP
1V, 1kHz 1.5 nF ±10% 2.00 ±0.40/±0.30 ±0.20 2.50% Embossed, 1Kpcs (I)
C4520X7R222KQPSL C4520X7R222KQP 1V, 1kHz 2.2 nF ±10% 1.60 ±0.30/±0.20 ±0.20 2.50% Embossed, 2Kpcs (I)
DF
(max.)
Standard
Packing
RV
DARFON P/N
DARFON P/N
Measuring
Condition
Test
Spec.
3000V
2000V
Capacitance
Available Tolerance
Thick.
(mm)
Tolerance(mm)
C4532X7R Series (EIA1812)
Value Unit L/W Thick.
3000V
C4532X7R102□RPSN C4532X7R102□RP 1V, 1kHz 1.0 nF ±10%, ±20% 2.00 +0.5-0.3/±0.3 ±0.20 2.50% Embossed, 1kpcs (I)
C4532X7R102KQPSG C4532X7R102KQP
1V, 1kHz 1.0 nF ±10% 1.25 ±0.40/±0.30 ±0.10 2.50% (I)
C4532X7R222KQPSG C4532X7R222KQP
1V, 1kHz 2.2 nF ±10% 1.25 ±0.40/±0.30 ±0.10 2.50% (I)
C4532X7R222KQPSL C4532X7R222KQP
1V, 1kHz 2.2 nF ±10% 1.60 ±0.30 ±0.20 2.50% (II)
C4532X7R103KQPSN C4532X7R103KQP
1V, 1kHz 10 nF ±10% 2.00 ±0.40/±0.20 ±0.20 2.50% Embossed, 1kpcs (I)
630V C4532X7R154KMPSP C4532X7R154KMP
1V, 1kHz 150 nF ±10% 2.50 +0.5-0.3/±0.4 ±0.30 2.50% Embossed, 0.5kpcs (II)
250V C4532X7R474KKPSN C4532X7R474KKP 1V, 1kHz 470 nF ±10% 2.00 +0.5-0.3/±0.3 ±0.20 2.50% Embossed, 1kpcs (I)
200V C4532X7R105KJPSP C4532X7R105KJP 1V, 1kHz 1.0 uF ±10% 2.50 +0.5-0.3/±0.4 ±0.30 2.50% Embossed, 0.5kpcs (I)
2000V
Embossed, 1kpcs
Available Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
Test
Spec.
RV
DARFON P/N
DARFON P/N
Measuring
Condition
Capacitance
□ Tolerance Code: K=±10%, M=±20%; Special tolerance on the request.
16
X7S Series
C2012X7S Series (EIA0805)
Value Unit L/W Thick.
100V C2012X7S105□HPSG C2012X7S105□HP 1V , 1kHz 1 uF ±10%, ±20% 1.25 ± 0.20 ±0.20 10.0% Embossed, 3Kpcs (II)
Test
Spec.
RV
DARFON P/N
DARFON P/N 2
Measuring
Condition
Capacitance
Available
Tolerance
Thick.
(mm)
Tolerance(mm)
DF
(max.)
Standard
Packing
□ Tolerance Code: K=±10%, M=±20%; Special tolerance on the request.
17 REV. 201610
MLCC
Middle High Voltage
Test Spec.
Middle-High Voltage (I)
Item
Specification
Test Method
Temp. compensation type
High dielectric constant type
1
Operation Temperature Range
NP0: -55 to 125 ℃
X7R/X7S: -55 to 125 ℃
---
2
Rated Voltage
Shown in the table of “Part Number & Characteristic”
The rated voltage is defined as the maximum voltage, which
may be applied continuously to the capacitor.
3
Appearance
No defects or abnormalities.
Visual inspection
4
Dimensions
Within the specified dimension.
Using calipers
5
Dielectric Strength
No defects or abnormalities.
No failure shall be observed when 250% of the rated voltage
(150% for 500V, 120% for above 1KV) is applied between the
terminations for 1 to 5 seconds. The charge and discharge
current is less than 50mA.
6
Insulation Resistance ( I.R.)
Rated Voltage
<200V
To apply rated
voltage.
I.R. ≧10GΩ or
RiCR≧100Ω-F
(whichever is smaller)
The insulation resistance shall be measured with a DC voltage
not exceeding the rated voltage at 25℃ and 75%RH max, and
within 1 minute of charging.
Rated Voltage
<500V
To apply rated
voltage.
I.R. ≧10GΩ or
RiCR≧100Ω-F
(whichever is smaller)
Rated Voltage
≧500V
To apply 500V.
7
Capacitance
Within the specified tolerance
* X7R/X7S at 1000 hours
The capacitance / D.F. shall be measured at 25℃ at the
frequency and voltage shown in the table of “Part Number &
Characteristic”.
8
Q/Dissipation Factor ( D.F.)
NP0:
If C≦30pF, DF≦1/(400+20C),
C in pF
If C >30pF, DF≦0.1%.
Shown in the table of “Part
Number & Characteristic”
9
Capacitance Temperature
Characteristics
Capacitance change
NP0 within 0±30ppm/℃ under
operating temperature range.
Capacitance change
X7R within ±15%
X7S within ±22%
1.Temperature compensation type:
The capacitance value at 25℃ and 85℃ shall be
measured and calculated from the formula given below.
T.C.=(C85-C25)/C25*ΔT*106(PPM/℃)
2.High dielectric constant type:
The ranges of capacitance change compared with the 25℃
value over the temperature ranges shall be within the
specified ranges.
10
Termination Strength
No removal of the terminations or marking defect.
Apply a parallel force of 5N to a PCB mounted sample for
10±1sec.
11
Deflection (Bending Strength)
No cracking or marking defects shall occur at 1mm deflection.
Capacitance change:
NP0: within ±5% or ± 0.5pF. (whichever is larger)
X7R, X5R, X7S within ±12.5%
Solder the capacitor to the test jig (glass epoxy boards) shown
in Fig.a using a SAC305(Sn96.5Ag3.0Cu0.5) solder (then let sit
for 24±2 hours for X7R).
Then apply a force in the direction shown in Fig.b. The
soldering shall be done with the reflow method and shall be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
(Unit in mm)
Size
a
b
C
0603
0.3
0.9
0.3
1005
0.4
1.5
0.5
1608
1.0
3.0
1.2
2012
1.2
4.0
1.65
3216
2.2
5.0
2.0
4520
3.5
7.0
2.5
4532
3.5
7.0
3.7
12
Solderability of Termination
90% of the terminations are to be soldered evenly and
continuously.
Immerse the test capacitor into a methanol solution containing
rosin for 3 to 5 seconds, preheat it 150 to 180℃ for 2 to 3
minutes and immerse it into SAC305(Sn96.5Ag3.0Cu0.5)
solder of 245 ± 5℃ for 3±1seconds.
13
Resistance to
Soldering Heat
Appearance
No marking defects
*Preheat the capacitor at 120 to 150℃ for 1 minute.
Immerse the capacitor in a SAC305(Sn96.5Ag3.0Cu0.5)
solder solution at 270±5℃ for 10±1 seconds. Let sit at room
temperature for 24±2 hours, then measure.
* Preheat 150 to 200℃ for size≧3216.
*High dielectric constant type:
Initial measurement : perform a heat treatment at 150+0/-10℃
for one hour and then let sit for 24±2 hours at room
temperature. Perform the initial measurement.
Cap. Change
NP0 within ±2.5% or 0.25pF
( whichever is larger )
X7R/X7S within ±7.5%
Q/D.F.
If C≦30pF, DF≦1/(400+20C)
If C >30pF, DF≦0.1%
To satisfy the specified initial
spec.
I.R.
I.R.≧10,000MΩ or RiCR≧
500Ω-F.
(whichever is smaller)
I.R.≧10,000MΩor RiCR≧
500Ω-F.
(whichever is smaller)
b
a
c
T:1.6mm(0.8 mm for 0603 & 1005 size)
40
100
4.5
Fig. a.
20
50
R230
45
45
Pressurizing speed:1.0m/sec.
Capacitance Meter
Pressurize
Flexure: 1mm
Fig.b.
18
Item
Specification
Test Method
Temp. compensation
type
High dielectric constant
type
14
Temperature cycle
(Thermal shock)
Appearance
No marking defects
Solder the capacitor to supporting jig (Glass epoxy board) and
perform the five cycles according to the four heat treatments
listed in the following table. Let sit for 24±2hrs at room
temperature, then measure.
Step 1: Minimum operating temperature
30±3min
Step 2: Room temperature
2~3 min
Step 3: Maximum operating temperature
30±3min
Step 4: Room temperature
2~3min
*High dielectric constant type:
Initial measurement: perform a heat treatment at 150±10℃ for
one hour and then let sit for 24±2 hours at room temp. Perform
the initial measurement.
Cap. Change
NP0 within ±2.5% or 0.25pF
( whichever is larger )
X7R/X7S within ±7.5%
Q/D.F.
If C≦30pF, DF≦1/(400+20C)
If C >30pF, DF≦0.1%
To satisfy the specified
initial spec.
I.R.
I.R.≧10,000MΩor RiCR≧500Ω-F.
(whichever is smaller)
I.R.≧10,000MΩor RiCR
≧500Ω-F.
(whichever is smaller)
15
Humidity load
Appearance
No marking defects
Apply the rated voltage (Max. 500V) at 40±2℃ and 90 to 95%
humidity for 500±12 hours. The charge / discharge current is
less than 50mA.
[Temperature compensation type]
Remove and let sit for 24±2 hours at room temperature, then
measure.
[High dielectric constant type]
*Initial measurement
Perform a heat treatment at 150+0/-10°C for one hour and then
let sit for 24±2 hours at room temperature.
Perform the initial measurement.
*Measurement after test
Perform a heat treatment and then let sit for 24±2 hours at
room temperature, then measure.
Cap. Change
NP0 within ±7.5% or 0.75pF
( whichever is larger )
X7R/X7S within ±12.5%
Q/D.F.
If C＞30pF, DF≦0.5%
If C≦30pF, DF≦1/(100+10xC/3)
C in pF
X7R/X7S 200% max of
initial spec.
I.R.
I.R.≧500MΩ or
RiCR≧25Ω-F.
(whichever is smaller)
I.R.≧500MΩ or
RiCR≧25Ω-F.
(whichever is smaller)
16
High temperature
load life test
Appearance
No marking defects
Apply 200%(150% for≧500V; 120% for≧1000V) of the rated
voltage for 1000±12 hours at the maximum operating
temperature ± 3℃. The charge / discharge current is less than
50mA.
[Temperature compensation type]
Remove and let sit for 24±2 hours at room temperature, then
measure.
[High dielectric constant type]
*Initial measurement
Perform a heat treatment at 150+0/-10°C for one hour and then
let sit for 24±2 hours at room temperature.
Perform the initial measurement.
*Measurement after test
Perform a heat treatment and then let sit for 24±2 hours at
room temperature, then measure.
Cap. Change
NP0 within ±7.5% or 0.75pF
( whichever is larger )
X7R/X7S within ±12.5%
Q/D.F.
If C＞30pF, DF≦0.3%
If 10pF<C≦30pF,
DF≦1/(275+5xC/2)
If C≦10pF, DF≦1/(200+10C),
C in pF
X7R/X7S 200% max of
initial spec.
I.R.
More than 1GΩ or
RiCr≧50Ω-F (whichever is less.)
More than 1GΩ or
RiCr≧50Ω-F (whichever is
less.)
19 REV. 201610
MLCC
Middle High Voltage
Middle-High Voltage (II)
Item
Specification
Test Method
Temp. compensation type
High dielectric constant type
1
Operation Temperature Range
NP0: -55 to 125 ℃
X7R/X7S: -55 to 125 ℃
---
2
Rated Voltage
Shown in the table of “Part Number & Characteristic”
The rated voltage is defined as the maximum voltage, which
may be applied continuously to the capacitor.
3
Appearance
No defects or abnormalities.
Visual inspection
4
Dimensions
Within the specified dimension.
Using calipers
5
Dielectric Strength
No defects or abnormalities.
No failure shall be observed when 250% of the rated voltage
(150% for 500V, 120% for above 1KV) is applied between the
terminations for 1 to 5 seconds. The charge and discharge
current is less than 50mA.
6
Insulation Resistance ( I.R.)
C≦0.047uF : More than 10000 MΩ
C> 0.047uF : More than 500Ω-F
C: Nominal Capacitance
The insulation resistance shall be measured with a DC voltage
not exceeding the rated voltage at 25℃ and 75%RH max, and
within 1 minute of charging.
7
Capacitance
Within the specified tolerance
* X7R/X7S at 1000 hours
The capacitance / D.F. shall be measured at 25℃ at the
frequency and voltage shown in the table of “Part Number &
Characteristic”.
8
Q/Dissipation Factor ( D.F.)
NP0:
If C≦30pF, DF≦1/(400+20C),
C in pF
If C >30pF, DF≦0.1%.
Shown in the table of “Part
Number & Characteristic”
9
Capacitance Temperature
Characteristics
Capacitance change
NP0 within 0±30ppm/℃ under
operating temperature range.
Capacitance change
X7R within ±15%
X7S within ±22%
1.Temperature compensation type:
The capacitance value at 25℃ and 85℃ shall be
measured and calculated from the formula given below.
T.C.=(C85-C25)/C25*ΔT*106(PPM/℃)
2.High dielectric constant type:
The ranges of capacitance change compared with the 25℃
value over the temperature ranges shall be within the
specified ranges.
10
Termination Strength
No removal of the terminations or marking defect.
Apply a parallel force of 5N to a PCB mounted sample for
10±1sec.
11
Deflection (Bending Strength)
No cracking or marking defects shall occur at 1mm deflection.
Capacitance change:
NP0: within ±5% or ± 0.5pF. (whichever is larger)
X7R, X5R, X7S :within ±12.5%
Solder the capacitor to the test jig (glass epoxy boards) shown
in Fig.a using a SAC305(Sn96.5Ag3.0Cu0.5) solder (then let sit
for 24±2 hours for X7R).
Then apply a force in the direction shown in Fig.b. The
soldering shall be done with the reflow method and shall be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
(Unit in mm)
Size
a
b
C
0603
0.3
0.9
0.3
1005
0.4
1.5
0.5
1608
1.0
3.0
1.2
2012
1.2
4.0
1.65
3216
2.2
5.0
2.0
4520
3.5
7.0
2.5
4532
3.5
7.0
3.7
12
Solderability of Termination
90% of the terminations are to be soldered evenly and
continuously.
Immerse the test capacitor into a methanol solution containing
rosin for 3 to 5 seconds, preheat it 150 to 180℃ for 2 to 3
minutes and immerse it into SAC305(Sn96.5Ag3.0Cu0.5)
solder of 245 ± 5℃ for 3±1seconds.
13
Resistance to
Soldering Heat
Appearance
No marking defects
*Preheat the capacitor at 120 to 150℃ for 1 minute.
Immerse the capacitor in a SAC305(Sn96.5Ag3.0Cu0.5)
solder solution at 270±5℃ for 10±1 seconds. Let sit at room
temperature for 24±2 hours, then measure.
* Preheat 150 to 200℃ for size≧3216.
*High dielectric constant type:
Initial measurement : perform a heat treatment at 150+0/-10℃
for one hour and then let sit for 24±2 hours at room
temperature. Perform the initial measurement.
Cap. Change
NP0 within ±2.5% or 0.25pF
( whichever is larger )
X7R/X7S within ±7.5%
Q/D.F.
If C≦30pF, DF≦1/(400+20C)
If C >30pF, DF≦0.1%
To satisfy the specified initial
spec.
I.R.
I.R.≧10,000MΩ or RiCR≧
500Ω-F.
(whichever is smaller)
I.R.≧10,000MΩor RiCR≧
500Ω-F.
(whichever is smaller)
b
a
c
T:1.6mm(0.8 mm for 0603 & 1005 size)
40
100
4.5
Fig. a.
20
50
R230
45
45
Pressurizing speed:1.0m/sec.
Capacitance Meter
Pressurize
Flexure: 1mm
Fig.b.
20
Item
Specification
Test Method
Temp. compensation
type
High dielectric constant
type
14
Temperature cycle
(Thermal shock)
Appearance
No marking defects
Solder the capacitor to supporting jig (Glass epoxy board) and
perform the five cycles according to the four heat treatments
listed in the following table. Let sit for 24±2hrs at room
temperature, then measure.
Step 1: Minimum operating temperature
30±3min
Step 2: Room temperature
2~3 min
Step 3: Maximum operating temperature
30±3min
Step 4: Room temperature
2~3min
*High dielectric constant type:
Initial measurement: perform a heat treatment at 150±10℃ for
one hour and then let sit for 24±2 hours at room temp. Perform
the initial measurement.
Cap. Change
NP0 within ±2.5% or 0.25pF
( whichever is larger )
X7R/X7S within ±7.5%
Q/D.F.
If C≦30pF, DF≦1/(400+20C)
If C >30pF, DF≦0.1%
To satisfy the specified
initial spec.
I.R.
I.R.≧10,000MΩor RiCR≧500Ω-F.
(whichever is smaller)
I.R.≧10,000MΩor RiCR
≧500Ω-F.
(whichever is smaller)
15
Humidity load
Appearance
No marking defects
Apply the rated voltage (Max. 500V) at 40±2℃ and 90 to 95%
humidity for 500±12 hours. The charge / discharge current is
less than 50mA.
[Temperature compensation type]
Remove and let sit for 24±2 hours at room temperature, then
measure.
[High dielectric constant type]
*Initial measurement
Perform a heat treatment at 150+0/-10°C for one hour and then
let sit for 24±2 hours at room temperature.
Perform the initial measurement.
*Measurement after test
Perform a9 heat treatment and then let sit for 24±2 hours at
room temperature, then measure.
Cap. Change
NP0 within ±7.5% or 0.75pF
( whichever is larger )
X7R/X7S within ±12.5%
Q/D.F.
If C＞30pF, DF≦0.5%
If C≦30pF, DF≦1/(100+10xC/3)
C in pF
X7R/X7S 200% max of
initial spec.
I.R.
I.R.≧500MΩ or
RiCR≧25Ω-F.
(whichever is smaller)
I.R.≧500MΩ or
RiCR≧25Ω-F.
(whichever is smaller)
16
High temperature
load life test
Appearance
No marking defects
Apply 150%(120% for≧250V; 100% for≧1000V) of the rated
voltage for 1000±12 hours at the maximum operating
temperature ± 3℃. The charge / discharge current is less than
50mA.
[Temperature compensation type]
Remove and let sit for 24±2 hours at room temperature, then
measure.
[High dielectric constant type]
*Initial measurement
Perform a heat treatment at 150+0/-10°C for one hour and then
let sit for 24±2 hours at room temperature.
Perform the initial measurement.
*Measurement after test
Perform a heat treatment and then let sit for 24±2 hours at
room temperature, then measure.
Cap. Change
NP0 within ±7.5% or 0.75pF
( whichever is larger )
X7R/X7S within ±12.5%
Q/D.F.
If C＞30pF, DF≦0.3%
If 10pF<C≦30pF,
DF≦1/(275+5xC/2)
If C≦10pF, DF≦1/(200+10C),
C in pF
X7R/X7S 200% max of
initial spec.
I.R.
More than 1GΩ or
RiCr≧50Ω-F (whichever is less.)
More than 1GΩ or
RiCr≧50Ω-F (whichever is
less.)
21 REV. 201610
MLCC
Package
Tape and reel packaging
Tape and reel packaging is currently the most promising system for high-speed production. A typical 180mm (7
inch) diameter reel contains 1,500 to 15,000 capacitors, 250mm (10 inch) contains 10,000 capacitors, and 330mm
(13 inch) contains 10,000 to 50,000 capacitors. Three standard sizes are available in taped and reeled package
either with paper carrier tapes or embossed tapes.
【Paper tape specifications】
2mm and 4mm pitch tape
SYMBOL
PRODUCT SIZE CODE
UNIT
C0603(0201)
C1005(0402)
C1608 (0603)
C2012 (0805)
C3216 (1206)
SIZE
TOL.
SIZE
TOL.
SIZE
TOL.
SIZE
TOL.
SIZE
TOL.
A
0.38
± 0.04
0.65
± 0.10
1.0
±0.2
1.5
±0.2
1.9
±0.2
mm
B
0.68
± 0.04
1.15
± 0.10
1.8
±0.2
2.3
±0.2
3.6
±0.2
mm
F
3.5
± 0.05
3.5
± 0.05
3.5
±0.05
3.5
±0.05
3.5
±0.05
mm
P
2
± 0.10
2
± 0.10
4
±0.1
4
±0.1
4
±0.1
mm
W
8
± 0.20
8
± 0.20
8
±0.2
8
±0.2
8
±0.2
mm
B
A
P
4.0±0.1
2.0±0.05
1.75±0.1
1.5
+ 0.1
-0.0
W
Direction of feed
1.1 max
F
Cardboard
22
【Embossed tape specifications】
For W= 8mm: T1=2.5mm max.
For W= 12mm: T1= 4.5mm
DIMENSION
(mm)
PRODUCT SIZE CODE
4 mm tape
8 mm tape
1608
(0603)
2012
(0805)
3216
(1206)
3225
(1210)
4520
(1808)
4532
(1812)
P1
4±0.1
4±0.1
4±0.1
4±0.1
8±0.1
8±0.1
PO
4±0.1
4±0.1
4±0.1
4±0.1
4±0.1
4±0.1
P2
2±0.05
2±0.05
2±0.05
2±0.05
2±0.05
2±0.05
A
1.2±0.2
1.45±0.2
1.9±0.2
2.8±0.2
2.3±0.2
3.6±0.2
B
2.0±0.2
2.3±0.2
3.5±0.2
3.6±0.2
4.9±0.2
4.9±0.2
W
8±0.3
8±0.2
8±0.2
8±0.2
12±0.2
12±0.2
E
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
F
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
5.5±0.05
5.5±0.05
D
1.5
(+0.1/-0.0)
1.5
(+0.1/-0.0)
1.5
(+0.1/-0.0)
1.5
(+0.1/-0.0)
1.5
(+0.1/-0.0)
1.5
(+0.1/-0.0)
T1
1.4 max.
2.5 max.
2.5 max.
2.5 max.
4.5 max.
4.5 max.
T2
0.25±0.1
0.305±0.1
0.30±0.1
0.30±0.1
0.30±0.1
0.30±0.1
1mm and 4mm and 8mm pitch tape
B
A
P1
P0
P2
E
W
Direction of feed
F
D
T1
T2
23 REV. 201610
MLCC
【Reel specifications】
TAPE WIDTH
(mm)
G
(mm)
T max.
(mm)
D
(mm)
4
5.0 ± 1.5
8.0
180
8
10.0 ± 1.5
14.5
180
8
10.0 ± 1.5
14.5
250
8
10.0 ± 1.5
14.5
330
12
14.0 ± 1.5
18.5
180
2.0+/-0.5
f13.0+/-0.5 f21.0+/-0.8
50 min.
G
T
D
24
【Thickness and Packing Amount】
Thickness
Amount per reel
180 mm (7”)
330 mm (13”)
Code
Spec.(mm)
Size (EIA)
Paper
Embossed
Paper
Embossed
Z
0.20
0402 (01005)
20K
40K#1
A
0.30
0603 (0201)
15K
50K
1005 (0402)
15K
50K
B
0.50
1005 (0402)
10K
50K
Q
0.45
1005 (0402)
10K
50K
1608 (0603)
4K
15K
C
0.60
2012 (0805)
4K
15K
3216 (1206)
4K
15K
D
0.80
1608 (0603)
4K
4K
15K
E
0.85
2012 (0805)
4K
15K
3216 (1206)
4K
15K
3225 (1210)
3K
10K
4532 (1812)
1K
I
0.95
2012 (0805)
3K
3216 (1206)
3K
F
1.15
3216 (1206)
3K
10K
4520 (1808)
3K
G
1.25
2012 (0805)
2K/3K
10K
3216 (1206)
3K
10K
3225 (1210)
3K
4520 (1808)
2K/3K
4532 (1812)
1K
3225 (1210)
3K
L
1.60
3216 (1206)
2K
3225 (1210)
2K
4520 (1808)
2K
4532 (1812)
1K
N
2.00
3216 (1206)
2K/3K
3225 (1210)
2K
4520 (1808)
1K
4532 (1812)
1K
P
2.50
3225 (1210)
500pcs/1K
#1: 4mm width 1mm pitch Embossed Taping
【Packing Rule】
EIA SIZE
Tape
Reel Size
Reels/Box
Boxes/ Carton
01005
Emboss
7”
8
12
01005
Paper
7”
5
12
0201
Paper
7"
5
12
0402
Paper
7"
5
12
0603
Paper/Emboss
7"
5
12
0805
Paper/Emboss
7"
5
12
1206
Paper/Emboss
7"
5
12
1210
Emboss
7"
5
12
1808
Emboss
7"
5
12
1812
Emboss
7"
5
12
25 REV. 201610
MLCC
Others
【Storage】
1. The chip capacitors shall be packaged in carrier tapes or bulk cases.
2. Keep storage place temperatures from +5℃ to +35℃, humidity from 45 to 70% RH.
3. The storage atmosphere must be free of gas containing sulfur and chlorine. Also, avoid
exposing the product to saline moisture. If the product is exposed to such atmospheres, the
terminations will oxidize and solderability will be affected.
4. The solderability is assured for 12 months from our final inspection date if the above
storage condition is followed.
【Circuit Design】
1. Once application and assembly environments have been checked, the capacitor may be
used in conformance with the rating and performance, which are provided in both the
catalog and the specifications. Exceeding the specifications listed may result in inferior
performance. It may also cause a short, open, smoking, or flaming to occur, etc.
2. Please use the capacitors in conformance with the operating temperature provided in both
the catalog and the specifications. Be especially cautious not to exceed the maximum
temperature. In the situation the maximum temperature set forth in both the catalog and
specifications is exceeded, the capacitor’s insulation resistance may deteriorate, power
may suddenly surge and short-circuit may occur. The loss of capacitance will occur, and
may self-heat due to equivalent series resistance when alternating electric current is
passed through. As this effect becomes critical in high frequency circuits, please exercise
with caution. When using the capacitor in a (self-heating) circuit, please make sure the
surface of the capacitor remains under the maximum temperature for usage. Also, please
make certain temperature rise remain below 20℃.
3. Please keep voltage under the rated voltage, which is applied to the capacitor. Also, please
make certain the peak voltage remains below the rated voltage when AC voltage is
super-imposed to the DC voltage. In the situation where AC or pulse voltage is employed,
ensure average peak voltage does not exceed the rated voltage. Exceeding the rated
voltage provided in both catalog and specifications may lead to defective withstanding
voltage or, in worse case situations, may cause the capacitor to burn out.
4. It’s is a common phenomenon of high-dielectric products to have a deteriorated amount of
static electricity due to the application of DC voltage.
26
【Handling】
Chip capacitors should be handled with care to avoid contamination or damage. The use of vacuum pick-up or
plastic tweezers is recommended for manual placement. Tape and reeled packages are suitable for automatic
pick and placement machine.
【Flux】
1. An excessive amount of flux or too rapid temperature rise can causes solvent burst, solder
can generate a large quantity of gas. The gas can spreads small solder particles to cause
solder balling effect or bridging problem.
2. Flux containing too high of a percentage of halide may cause corrosion of termination
unless sufficient cleaning is applied.
3. Use rosin-type flux. Highly acidic flux (halide content less than 0.2wt%) is not
recommended.
4. The water soluble flux causes deteriorated insulation resistance between outer
terminations unless sufficiently cleaned.
【Component Spacing】
For wave soldering components, the spacing must be sufficient far apart to prevent bridging or shadowing. This is
not so important for reflow process but enough space for rework should be considered. The suggested spacing
for reflow soldering and wave soldering is 0.5mm and 1.0mm, respectively.
【Solder Fillet】
Too much solder amount may increase solder stress and cause crack risk. Insufficient solder amount may reduce
adhesive Strength and cause parts falling off PCB. When soldering, confirm that the solder is placed over 0.2mm
of the surface of the terminations.
Max. buildup
Min. buildup
Resist
Adhesive
0.20mm Min.
PCB
Land
Joint
27 REV. 201610
MLCC
【Recommended Land Pattern Dimensions】
When mounting the capacitor to substrate, it’s important to consider that the amount of solder (size of fillet) used
has a direct effect upon the capacitor once it’s mounted.
1. The greater the amount of solder, the greater the stress to the elements, as this may cause
the substrate to break or crack.
2. In the situation where two or more devices are mounted onto a common land, separate the
device into exclusive pads by using soldering resist.
3. Land width equal to or less than component. It is permissible to reduce land width to 80% of
component width.
Size mm (EIA)
L x W (mm)
(Dimension
tolerance)
a (mm)
b (mm)
c (mm)
0402 (01005)
0.4*0.2
0.16 to 0.20
0.12 to 0.18
0.20 to 0.23
0603 (0201)
0.6*0.3
0.15 to 0.35
0.2 to 0.3
0.25 to 0.3
1005 (0402)
1.0*0.5
(within±0.10)
0.3 to 0.5
0.35 to 0.45
0.4 to 0.5
1.0*0.5
(±0.15 or ±0.20)
0.4 to 0.6
0.4 to 0.5
0.5 to 0.6
1608 (0603)
1.6*0.8
(within±0.10)
0.7 to 1.0
0.6 to 0.8
0.7 to 0.8
1.6*0.8
(±0.15 or ±0.20)
0.8 to 1.1
0.7 to 0.9
0.8 to 0.9
2012 (0805)
2.0*1.25
1.0 to 1.3
0.7 to 0.9
1.0 to 1.2
3216 (1206)
3.2*1.6
2.1 to 2.5
1.0 to 1.2
1.3 to 1.6
3225 (1210)
3.2*2.5
2.1 to 2.5
1.0 to 1.2
2.0 to 2.5
4520 (1808)
4.5*2.0
3.2 to 3.8
1.2 to 1.4
1.7 to 2.0
4532 (1812)
4.5*3.2
3.2 to 3.8
1.2 to 1.4
2.7 to 3.2
c
a
b
Soldering resist
SMD capacitor
Land Patern
28
【Resin Mold】
If a large amount of resin is used for molding the chip, cracks may occur due to contraction
stress during curing. To avoid such cracks, use a low shrinkage resin. The insulation
resistance of the chip will degrade due to moisture absorption. Use a low moisture absorption
resin. Check carefully that the resin does not generate a decomposition gas or reaction gas
during the curing process or during normal storage. Such gases may crack the chip capacitor
or damage the device itself.
【Soldering Profile for SMT Process with SnPb Solder Paste】
Reflow Soldering
The difference between solder and chip surface should be controlled as following table. The
rate of preheat should not exceed 4℃/sec and a target of 2℃/sec is preferred.
Chip Size
3216 and smaller
3225 and above
Preheating
△T≦150℃
△T≦130℃
0
300
250
200
200℃
Within 40 sec.
△T
60 sec. min.
120 sec. max.
Soldering
220℃ to 230℃
Within 10 sec.
Temperature (℃)
Preheating
Time (sec.)
Gradual
Natural Cooling
29 REV. 201610
MLCC
Wave Soldering
Chip Size
3216 and smaller
3225 and above
Preheating
△T≦150℃
-
Soldering Iron
Chip Size
3216 and smaller
3225 and above
Preheating
△T≦190℃
△T≦130℃
0
300
270
3 sec. max.
△T
Preheating
Time (sec.)
Gradual
Natural Cooling
60 sec. ~ 120 sec.
Soldering
270℃ to 300℃
Temperature (℃)
1. Soldering iron wattage 20W maximum.
2. Iron-tip diameter 3.0mm maximum.
0
300
250
5 sec. max.
△T
Preheating
Time (sec.)
Gradual
Natural Cooling
60 sec. ~ 120 sec.
Soldering
230℃ to 260℃
Temperature
(℃)
30
【Soldering】
Reflow Soldering for Lead free Termination
The difference between solder and chip surface should be controlled as following table. The
rate of preheat should not exceed 4℃/sec and a target of 2℃/sec is preferred.
Chip Size
3216 and smaller
3225 and above
Preheating
△T≦150℃
△T≦130℃
Flow Soldering for Lead free Termination
Chip Size
3216 and smaller
3225 and above
Preheating
△T≦150℃
-
Preheating
0
3 ~ 5 sec.
△T
Time (sec.)
Gradual
Natural Cooling
60 sec. ~ 120 sec.
Soldering
240℃ to 260℃
Temperature (℃)
300
250
200
0
300
250
200
200℃
Over 200oC
Within 90 sec.
△T
60 sec. min.
120 sec. max.
Soldering
240oC to 260oC
Within 10 sec.
Temperature (oC)
Preheating
Time (sec.)
Gradual
Natural Cooling
31 REV. 201610
MLCC
Soldering Iron
Chip Size
3216 and smaller
3225 and above
Preheating
△T≦190℃
△T≦130℃
【Chip Layout and Breaking PCB】
1. To layout the SMD capacitors for reducing bend stress from board deflection of PCB. The
following are examples of Hood and bad layout.
Recommended
Not Recommended
2. When breaking PCB, the layout should be noted that the mechanical stresses are
depending on the position of capacitors. The following example shows recommendation for
better design.
A
D
E
C
B
Perforation
Slit
Magnitude of stresses A > B = C > D > E
1. Soldering iron wattage 20W maximum.
2. Iron-tip diameter 3.0mm maximum.
0
300
270
3 sec.
max.
△T
Preheatin
g
Time
(sec.)
Gradual
Natural
Cooling
60 sec. ~ 120
sec.
Soldering
270℃ to 300
℃
Temperature
(℃)
32
【Aging Rate】
The capacitance and dissipation factor of class 2 capacitors decreases with time. It is known
as ‘aging’ that follows a logarithmic low and expressed in terms of an aging constant. Aging is
caused by a gradual re-alignment of the crystalline structure of the ceramic. The aging
constant is defined as the percentage loss of capacitance at a ‘time decade’. The law of
capacitance aging is expressed as following equation:
When heating the capacitors above Curie temperature (130℃~150℃) the capacitance can be
re-new. So capacitance of class 2 capacitors will be complete de-aged by soldering process;
subsequently a new aging process begins.
Because of aging, it is specified an age for measurement to meet the prescribed tolerance for
class 2 capacitors. Normally, 1000 hours (t2=1000 hrs) is defined.
【Peeling Off Force】
Peeling off force: 0.1N to 1.0 N* in the direction shown as below.
The peeling speed: 300±10 mm/min
1. The taped tape on reel is wound clockwise. The sprocket holes are to the right as the tape is
pulled toward the user.
2. There are minimum 150 mm as the leader and minimum 40 mm empty tape as the tail is
attached to the end of the tape.
Top tape
Base tape
Peeling force
165 ° to 180°
Ct2 = Ct1 x (1 – k x log10(t2/t1))
Ct1: Capacitance after t1 hours of start aging.
Ct2: Capacitance after t2 hours of start aging.
k: aging constant (capacitance decrease per decade)
t1, t2: time in hours from start of aging.
A typical curve of aging rate is shown in following
figure.
