Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FCPF1300N80Z N-Channel SuperFET(R) II MOSFET 800 V, 6 A, 1.3 Features Description SuperFET(R) II MOSFET is Fairchild Semiconductor's brand-new high voltage super-junction (SJ) MOSFET family that is utilizing charge balance technology for outstanding low on-resistance and lower gate charge performance. This technology is tailored to minimize conduction loss, provide superior switching performance, dv/dt rate and higher avalanche energy. In addition, internal gate-source ESD diode allows to withstand over 2kV HBM surge stress. Consequently, SuperFET II MOSFET is very suitable for the switching power applications such as Audio, Laptop adapter, Lighting, ATX power and industrial power applications. * RDS(on) = 1.05 (Typ.) * Ultra Low Gate Charge (Typ. Qg = 16.2 nC) * Low Eoss (Typ. 1.57 uJ @ 400V) * Low Effective Output Capacitance (Typ. Coss(eff.) = 48.7 pF) * 100% Avalanche Tested * RoHS Compliant * ESD Improved Capability Applications * AC - DC Power Supply * LED Lighting D D G D S G TO-220F G TO-220F Y-formed S Absolute Maximum Ratings TC = 25oC unless otherwise noted. Symbol VDSS S FCPF1300N80Z FCPF1300N80ZYD 800 Parameter Drain to Source Voltage - DC 20 Unit V VGSS Gate to Source Voltage ID Drain Current IDM Drain Current (Note 1) 12* A EAS Single Pulsed Avalanche Energy (Note 2) 48 mJ IAR Avalanche Current (Note 1) 0.8 A EAR Repetitive Avalanche Energy (Note 1) 0.26 mJ dv/dt - AC (f > 1 Hz) - Continuous (TC = 25oC) 6.0* - Continuous (TC = 100oC) - Pulsed A 3.8* MOSFET dv/dt 100 Peak Diode Recovery dv/dt (Note 3) (TC = 25oC) PD Power Dissipation TJ, TSTG Operating and Storage Temperature Range Maximum Lead Temperature for Soldering, 1/8" from Case for 5 Seconds TL V 30 - Derate Above 25oC V/ns 20 24 W 0.19 W/oC -55 to +150 o C 300 o C *Drain current limited by maximum junction temperature, with heatsink. Thermal Characteristics Symbol FCPF1300N80Z FCPF1300N80ZYD Parameter RJC Thermal Resistance, Junction to Case, Max. 5.2 RJA Thermal Resistance, Junction to Ambient, Max. 62.5 (c)2014 Fairchild Semiconductor Corporation FCPF1300N80Z Rev. 1.2 1 Unit oC/W www.fairchildsemi.com FCPF1300N80Z -- N-Channel SuperFET(R) II MOSFET August 2015 Part Number FCPF1300N80Z Top Mark FCPF1300N80Z Package TO-220F Packing Method Tube Reel Size N/A Tape Width N/A Quantity 50 units FCPF1300N80ZYD FCPF1300N80Z TO-220F Y-formed Tube N/A N/A 50 units Electrical Characteristics TC = 25oC unless otherwise noted. Symbol Parameter Test Conditions Min. Typ. Max. Unit 800 - - V - 0.85 - V/oC Off Characteristics BVDSS BVDSS / TJ Drain to Source Breakdown Voltage Breakdown Voltage Temperature Coefficient IDSS Zero Gate Voltage Drain Current IGSS Gate to Body Leakage Current VGS = 0 V, ID = 1 mA, TJ = 25C o ID = 1 mA, Referenced to 25 C VDS = 800 V, VGS = 0 V - - 25 VDS = 640 V, VGS = 0 V,TC = 125oC - - 250 VGS = 20 V, VDS = 0 V - - 10 2.5 - 4.5 V - 1.05 1.3 - 4.5 - S A A On Characteristics VGS(th) RDS(on) Gate Threshold Voltage VGS = VDS, ID = 0.4 mA Static Drain to Source On Resistance gFS Forward Transconductance VGS = 10 V, ID = 2 A VDS = 20 V, ID = 2 A Dynamic Characteristics VDS = 100 V, VGS = 0 V, f = 1 MHz - 661 880 pF - 22.3 30 pF - 0.74 - pF Output Capacitance VDS = 480 V, VGS = 0 V, f = 1 MHz - 11.4 - pF Coss(eff.) Effective Output Capacitance VDS = 0 V to 480 V, VGS = 0 V - 48.7 - pF VDS = 640 V, ID = 4 A, VGS = 10 V - 16.2 21 nC - 3.5 - nC Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Coss Qg(tot) Total Gate Charge at 10V Qgs Gate to Source Gate Charge Qgd Gate to Drain "Miller" Charge ESR Equivalent Series Resistance (Note 4) - 6.8 - nC f = 1 MHz - 4 - - 14 38 ns VDD = 400 V, ID = 4 A, VGS = 10 V, Rg = 4.7 - 8.3 27 ns - 33 76 ns - 6 22 ns Switching Characteristics td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time (Note 4) Drain-Source Diode Characteristics IS Maximum Continuous Drain to Source Diode Forward Current - - 6 A ISM Maximum Pulsed Drain to Source Diode Forward Current - - 12 A VSD Drain to Source Diode Forward Voltage VGS = 0 V, ISD = 4 A - - 1.2 V trr Reverse Recovery Time - 275 - ns Qrr Reverse Recovery Charge VGS = 0 V, ISD = 4 A, dIF/dt = 100 A/s - 2.9 - C Notes: 1. Repetitive rating: pulse width limited by maximum junction temperature. 2. IAS = 0.8 A, RG = 25 , starting TJ = 25C 3. ISD 6 A, di/dt 200 A/s, VDD BVDSS, starting TJ = 25C 4. Essentially independent of operating temperature typical characteristic. (c)2014 Fairchild Semiconductor Corporation FCPF1300N80Z Rev. 1.2 2 www.fairchildsemi.com FCPF1300N80Z -- N-Channel SuperFET(R) II MOSFET Package Marking and Ordering Information Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 20 20 VGS = 20.0V 10.0V 8.0V 7.0V 6.5V 6.0V 5.5V 5.0V 10 ID, Drain Current[A] ID, Drain Current[A] 10 1 o 150 C o 25 C 1 o -55 C *Notes: 1. 250s Pulse Test *Notes: 1. VDS = 20V 2. 250s Pulse Test o 2. TC = 25 C 0.3 0.5 1 10 VDS, Drain-Source Voltage[V] 0.1 20 Figure 3. On-Resistance Variation vs. Drain Current and Gate Voltage 4 5 6 VGS, Gate-Source Voltage[V] 20 10 IS, Reverse Drain Current [A] 2.0 1.5 VGS = 10V VGS = 20V 1.0 o 150 C 1 0.1 o 25 C 0.01 *Notes: 1. VGS = 0V o 0.5 *Note: TC = 25 C 0 2 4 6 8 ID, Drain Current [A] 10 0.001 0.0 12 Figure 5. Capacitance Characteristics VGS, Gate-Source Voltage [V] 1000 Ciss 100 Coss 10 Crss 1 0.1 0.1 *Note: 1. VGS = 0V 2. f = 1MHz 1 10 100 VDS, Drain-Source Voltage [V] (c)2014 Fairchild Semiconductor Corporation FCPF1300N80Z Rev. 1.2 0.4 0.8 VSD, Body Diode Forward Voltage [V] 1.2 10 Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd 10000 2. 250s Pulse Test Figure 6. Gate Charge Characteristics 30000 Capacitances [pF] 7 Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperature 2.5 RDS(ON) [], Drain-Source On-Resistance 3 6 4 2 0 1000 3 VDS = 160V VDS = 400V VDS = 640V 8 *Note: ID = 4A 0 6 12 Qg, Total Gate Charge [nC] 18 www.fairchildsemi.com FCPF1300N80Z -- N-Channel SuperFET(R) II MOSFET Typical Performance Characteristics Figure 7. Breakdown Voltage Variation vs. Temperature Figure 8. On-Resistance Variation vs. Temperature 3.0 RDS(on), [Normalized] Drain-Source On-Resistance BVDSS, [Normalized] Drain-Source Breakdown Voltage 1.2 1.1 1.0 0.9 *Notes: 1. VGS = 0V 2. ID = 1mA 0.8 -100 -50 0 50 100 150 o TJ, Junction Temperature [ C] 2.5 2.0 1.5 1.0 0.5 0.0 -100 200 Figure 9. Maximum Safe Operating Area *Notes: 1. VGS = 10V 2. ID = 2A -50 0 50 100 150 o TJ, Junction Temperature [ C] 200 Figure 10. Maximum Drain Current vs. Case Temperature 7 30 10s ID, Drain Current [A] 10 6 ID, Drain Current [A] 100s 1ms 1 Operation in This Area is Limited by R DS(on) 0.1 10ms DC *Notes: 5 4 3 2 o 1. TC = 25 C 1 o 0.01 0.1 2. TJ = 150 C 3. Single Pulse 1 10 100 VDS, Drain-Source Voltage [V] 0 25 1000 50 75 100 125 o TC, Case Temperature [ C] 150 Figure 11. Eoss vs. Drain to Source Voltage 5 EOSS, [J] 4 3 2 1 0 0 200 400 600 VDS, Drain to Source Voltage [V] (c)2014 Fairchild Semiconductor Corporation FCPF1300N80Z Rev. 1.2 800 4 www.fairchildsemi.com FCPF1300N80Z -- N-Channel SuperFET(R) II MOSFET Typical Performance Characteristics (Continued) FCPF1300N80Z -- N-Channel SuperFET(R) II MOSFET Typical Performance Characteristics (Continued) Figure 12. Transient Thermal Response Curve 0.5 o ZJC(t), Thermal Response [ C/W] 6 1 0.2 0.1 PDM 0.05 0.1 t1 0.02 0.01 o 1. ZJC(t) = 5.2 C/W Max. 2. Duty Factor, D= t1/t2 3. TJM - TC = PDM * ZJC(t) Single pulse 0.01 -5 10 (c)2014 Fairchild Semiconductor Corporation FCPF1300N80Z Rev. 1.2 t2 *Notes: -4 10 -3 -2 -1 10 10 10 Rectangular Pulse Duration [sec] 5 0 10 1 10 www.fairchildsemi.com FCPF1300N80Z -- N-Channel SuperFET(R) II MOSFET IG = const. Figure 13. Gate Charge Test Circuit & Waveform VDS RG RL VDS VDD VGS VGS DUT V 10V GS 90% 10% td(on) tr t on td(off) tf t off Figure 14. Resistive Switching Test Circuit & Waveforms VGS Figure 15. Unclamped Inductive Switching Test Circuit & Waveforms (c)2014 Fairchild Semiconductor Corporation FCPF1300N80Z Rev. 1.2 6 www.fairchildsemi.com FCPF1300N80Z -- N-Channel SuperFET(R) II MOSFET DUT + VDS _ I SD L Driver RG VGS VGS ( Driver ) Same Type as DUT VDD * dv/dt controlled by RG * ISD controlled by pulse period Gate Pulse Width D = -------------------------Gate Pulse Period 10V IFM , Body Diode Forward Current I SD ( DUT ) di/dt IRM Body Diode Reverse Current VDS ( DUT ) Body Diode Recovery dv/dt VSD VDD Body Diode Forward Voltage Drop Figure 16. Peak Diode Recovery dv/dt Test Circuit & Waveforms (c)2014 Fairchild Semiconductor Corporation FCPF1300N80Z Rev. 1.2 7 www.fairchildsemi.com A B 10.36 9.96 B 3.28 3.08 7.00 3.40 3.20 2.66 2.42 0.70 6.88 6.48 1 X 45 B 16.00 15.60 1 R0.30 3 2.96 2.56 R0.30 1.47 1.24 10.45 9.45 B 2.14 16.07 15.67 B 10.00 9.00 0.90 0.70 0.50 M 2.54 A B 2.54 B 4.00 MIN B B 4.90 4.50 NOTES: A. EXCEPT WHERE NOTED CONFORMS TO EIAJ SC91A. B DOES NOT COMPLY EIAJ STD. VALUE. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. E. DIMENSION AND TOLERANCE AS PER ASME Y14.5-1994. F. DRAWING FILE NAME: TO220Q03REV2 0.60 0.45 6.00 4.00 B A 10.36 9.96 B 3.28 3.08 7.00 3.40 3.20 2.66 2.42 0.70 SEE NOTE "F" SEE NOTE "F" 6.88 6.48 1 X 45 B 16.00 15.60 16.07 15.67 (3.23) B 1 2.14 3 1.47 1.24 2.96 2.56 0.90 0.70 10.05 9.45 0.50 M A 30 0.45 0.25 2.54 B 2.54 B 4.90 4.50 NOTES: A. EXCEPT WHERE NOTED CONFORMS TO EIAJ SC91A. B DOES NOT COMPLY EIAJ STD. VALUE. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. E. DIMENSION AND TOLERANCE AS PER ASME Y14.5-1994. F. OPTION 1 - WITH SUPPORT PIN HOLE. OPTION 2 - NO SUPPORT PIN HOLE. G. DRAWING FILE NAME: TO220M03REV5 0.60 0.45 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com