Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com The ACTF9022/900.0/DCC6 is a low-loss, wide band SAW filter in a surface-mount ceramic DCC6 case for EGSM Tx applications etc. ( Centre Frequency 900.0MHz ) 1. Package Dimension (DCC6) 2. Pin Configuration 2 Input 5 Output 1,3,4,6 Ground Sign Data (unit: mm) Sign Data (unit: mm) A 1.9 E 1.2 B 0.64 F 3.8 C 1.0 G 3.8 D 1.27 2-1. *- The dot indicates terminal 1 3. Matching Circuit In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 4. Typical frequency response 5. Performance 5-1.Maximum Ratings Value Unit Input Power Level 10 dBm DC Voltage 12 V Storage Temperature Range -40 to +85 C Operating Temperature Range -10 to +65 C Rating In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 5-2.Electronic Characteristics Parameter Centre Frequency fC Minimum Typical Maximum Unit -- 900.000 -- MHz 3dB Bandwidth BW3 -- 19 -- MHz Usable Bandwidth BWUSE -- 15 -- MHz -- 2.7 3.6 dB -- 1.0 1.8 dB 48 20 48 57 28 58 ---- dB Insertion Loss IL 885.00 MHz .... 915.00 MHz Amplitude Variation (p-p) 885.00 MHz .... 915.00 MHz Absolute Attenuation DC .... 840.00 MHz 930.00 MHz .... 960.00 MHz 990.00 MHz .... 2000.0 MHz Input / Output Impedance 50 iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. 3. 4. 5. 6. The frequency f C is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 test system with VSWR1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04