MINIATURE RELAY 1 POLE--1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability gold-overlay contacts P type: Gold-overlay silver-palladium contacts International terminal pitch of one inch grid terminal layout High sensitivity, low power dissipation types also available Standard types: 0.45 W (A or B type) High sensitivity types: 0.2 W (C or E type) Conforms to FCC 68.302 (high dielectric strength type) UL recognized (File number E63615) CSA recognized (File number LR64026) ORDERING INFORMATION [Example] FBR211 S A (a) (b) (c) D012 (d) U - P (e) (f ) 2 (g) (-CSA) (h) (a) Series Name FBR211 (b) Enclosure S: Flux free type N: Plastic sealed type (c) Coil Power and Schematics A: Standard A type (nominal power 0.45 W type) B: Standard B type C: High sensitivity C type (nominal power 0.2 W type) E: High sensitivity E type (d) Nominal Voltage (Example) D003: 3 VDC D012: 12 VDC (refer to the COIL DATA CHART) (e) UL Standard Nil : Standard U : UL114 recognized (f ) Contact Material P : Gold-overlay silver-palladium M : Gold-overlay silver (g) Special Type Nil : Standard 2 : High dielectric strength type (h) CSA Standard Nil : Standard -CSA : UL114 + CSA recognized (e) is U } } Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR211SAD005-P Stamp: 211SAD005-P 1 FBR211 SERIES SAFETY STANDARD AND FILE NUMBERS UL114 (File No. E63615) C22.2 No. 14 (File No. LR40304 or LR64026) Nominal voltage Contact rating 1 A 28 VDC resistive 0.5 A 30 VAC resistive 1.5 to 24 VDC SPECIFICATIONS Item Contact Coil Time Value Insulation Life Other Standard (A or B type) High sensitive (C or E type) Arrangement 1 form C (SPDT) Material Gold-overlay silver-palladium or gold-overlay silver Resistance (initial) Maximum 100 m (at 0.1 A 6 VDC) Rating (resistive) 0.5 A 120 VAC or 1 A 28 VDC Maximum Carrying Current 2A Maximum Switching Power 60 VA or 28 W Max. Switching Voltage*1 220 VAC or 150 VDC Maximum Switching Current 1.25 A (AC) or 2 A (DC) Minimum Switching load*2 (reference) Plastic sealed 1 mA 1 Flux free 1 mA 5 Nominal Power (at 20C) Approximately 0.45 W Approximately 0.2 W Operate Power (at 20C) Approximately 0.315 W maximum Approximately 0.14 W maximum Operating Temperature -25C to +55C (no frost) -25C to +75C (no frost) Operating Humidity 45 to 85%RH Operate (at nominal voltage) Maximum 5 ms Release (at nominal voltage) Maximum 5 ms Resistance (initial) Minimum 100 M (at 500 VDC) Dielectric Strength between coil and contacts 500 VAC 1 minute (standard) 1,000 VAC 1 minute (high dielectric strength type) between open contacts 500 VAC 1 minute Mechanical 5 x 106 operations minimum Electrical (Refer to the REFERENCE DATA) 3 x 105 operations minimum (at 1 A/ 28 VDC resistive load) 1 x 105 operations minimum (at 2 A/ 12 VDC resistive load) 1 x 105 operations minimum (at 0.5 A/120 VDC resistive load) Vibration Resistance 10 to 55 Hz (double amplitude of 1.5 mm) Shock Resistance Misoperation 100 m/s2 (111 ms) Endurance 1,000 m/s2 (111 ms) Weight 60 m/s 2 (111 ms) Approximately 4 g *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 2 FBR211 SERIES COIL DATA CHART 1. STANDARD (A or B type) MODEL Nominal current Must Coil Nominal B type resistance (at nominal operate voltage voltage) voltage (10%) Flux free Plastic sealed approx. A type Flux free Plastic sealed FBR211SAD001- FBR211NAD001- FBR211SBD001- FBR211NBD001- 1.5 VDC 5 300 mA FBR211SAD003- FBR211NAD003- FBR211SBD003- FBR211NBD003- 3 VDC 20 150 mA FBR211SAD005- FBR211NAD005- FBR211SBD005- FBR211NBD005- 5 VDC 56 89 mA FBR211SAD006- FBR211NAD006- FBR211SBD006- FBR211NBD006- 6 VDC 80 75 mA FBR211SAD009- FBR211NAD009- FBR211SBD009- FBR211NBD009- 9 VDC 180 50 mA FBR211SAD012- FBR211NAD012- FBR211SBD012- FBR211NBD012- 12 VDC 320 38 mA FBR211SAD024- FBR211NAD024- FBR211SBD024- FBR211NBD024- 24 VDC Note: All values in the table are measured at 20C. 1,280 19 mA Must release voltage 70% max. 10% min. of nominal of nominal voltage voltage Maximum allowable voltage Coil Nominal temperature power rise 150% of Approx. Approx. nominal 450 mW 45 deg voltage (at nominal (at nominal voltage) voltage) 2. HIGH SENSITIVITY (C or E type) MODEL Nominal current Must Coil Nominal E type resistance (at nominal operate voltage voltage) voltage (10%) Flux free Plastic sealed approx. C type Flux free Plastic sealed 12 125 mA 3 VDC 45 67 mA 5 VDC 120 42 mA FBR211SCD006- FBR211NCD006- FBR211SED006- FBR211NED006- 6 VDC 180 33 mA FBR211SCD009- FBR211NCD009- FBR211SED009- FBR211NED009- 9 VDC 400 23 mA FBR211SCD012- FBR211NCD012- FBR211SED012- FBR211NED012- 12 VDC 700 17 mA FBR211SCD024- FBR211NCD024- FBR211SED024- FBR211NED024- 24 VDC 2,800 9 mA FBR211SCD001- FBR211NCD001- FBR211SED001- FBR211NED001- 1.5 VDC FBR211SCD003- FBR211NCD003- FBR211SED003- FBR211NED003- FBR211SCD005- FBR211NCD005- FBR211SED005- FBR211NED005- Must release voltage 70% max. 10% min. of nominal of nominal voltage voltage Maximum allowable voltage Coil Nominal temperature power rise 225% of Approx. Approx. nominal 200 mW 25 deg voltage (at nominal (at nominal voltage) voltage) Note: All values in the table are measured at 20C. CHARACTERISTIC DATA Operating voltage range Must ltage te vo opera -10 0 10 20 30 40 50 60 70 80 60 50 40 30 20 0.2 0.4 0.6 0.8 Coil power (W) Op era te 3 Standard (0.45 W type) High sensitive (0.2 W type) tim e 2 Release time 80 70 Must 1 ltage te vo opera 0 0.2 AC resistive load ( AC contact rating) DC resistive load ( DC contact rating) 1.0 0.5 0.3 20 30 50 120 Contact load current (A) 0.6 0.8 Life curve (x104) 200 100 50 12 V DC resistive load 10 5 120 V AC resistive load 0.1 10 0.4 Coil power (W) Maximum switching capacity Contact load current (A) Coil temperature rise (C) 110 100 90 4 Operating temperature (C) Coil temperature rise data (at 20C) Operating voltage range -10 0 10 20 30 40 50 60 70 80 Operating temperature (C) 70 140 130 120 Not including bounce time Service life (operations) 80 70 (Data) assumes that the maximum allowable temperature of E type insulation coil is 115C 160 150 Operate and release time data 5 Time (msec) Nominal voltage multiplying factor (%) e ag olt il v co le ab ow all 140 130 120 ge volta coil able llow ma imu Max (Data) assumes that the maximum allowable temperature of E type insulation coil is 115C 160 150 110 100 90 Range of operation temperature and voltage (high sensitive 0.2 W type) um xim Ma Nominal voltage multiplying factor (%) Range of operation temperature and voltage (Standard 0.45 W type) 1 0 0.5 1.0 28 V DC resistive load 1.5 2.0 Contact load current (A) 3 FBR211 SERIES REFERENCE DATA Distribution of operate and release voltage Distribution of operate and release time 60 FBR211 n = 100 Release 40 30 FBR211 n = 100 60 Distribution (%) 80 Distribution (%) Distribution (%) FBR211 n = 100 Operate Release Operate 50 Distribution of contact resistance 80 100 60 40 40 20 20 20 10 0 0 0 0 10 20 30 40 50 60 70 0 80 1 2 3 Nominal voltage multiplying factor (%) 4 5 6 7 0 8 10 20 30 40 50 60 70 80 Contact resistance (m) Time (ms) DIMENSIONS 1. STANDARD (Flux free type) Dimensions Schematics (BOTTOM VIEW) (A type or C type) +0.5 15.1 0.3 7.62 (1.24) 0.6 0.35 (1.2) 10.16 1 5 6 1 5 6 12 8 7 12 8 7 2.54 2. N-TYPE (Plastic sealed type) Dimensions 11.7 +0.5 Schematics (BOTTOM VIEW) (A type or C type) +0.5 (B type or E type) 1 5 6 1 5 6 12 8 7 12 8 7 3.2 10.7+0.5 16.5 0.3 (B type or E type) 3.2 10.5+0.5 10.1 +0.5 0.6 7.62 (2.04) (1.9) 10.16 2.54 3. PC BOARD MOUNTING HOLE LAYOUT PC board mounting hole layout (BOTTOM VIEW) 7.62 6-o1.0 10.16 2.54 Unit: mm 4 FBR211 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2003 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 02/18/2003 5