Guangzhou Qiaoguang Photoelectricity Technology Co., Ltd
Website : www.opto-source.net E-mail : sales@opto-source.com
Fax : +86-20-8264-3119
20150524 version: 1.1
Solder-Free Holder For Bridgelux V Series LEDs
Introductiom
Product Feature Map
These new solder-free holder sour ces simplify luminaire design and
manufactur ing processes , improv e light quality, and define a optical
platform for future functiona lity integration.
These solder-fr ee holder is availabl e in three different dimension (AL-
Board) configurati ons and three dif ferent LES (light emitting surface)
configurati ons and has been engineered to enabling new degrees of
flexibility in luminaire design optimization.
These solder-fr ee includes an on board connector port to enable
solder-free electrical interconnect and simple easy to use mounting
features to enable plug-and-play i nstall ation. And set asi de holes
optical component s.
Thermally isolated solder pads reduc e
manufacturing cycle time and complexity Polarity indication marks simplify
manufacturing operator instructions
Optics location /
mounting features
Top side part number
marking improves
inventory managem ent
and outgoing quality
control
Mounting holes
Solderless connector port enables simplified manufacturing processes,
reduced inventory carrying costs and can enable field upgradability
Guangzhou Qiaoguang Photoelectricity Technology Co., Ltd
Website : www.opto-source.net E-mail : sales@opto-source.com
Fax : +86-20-8264-3119
20150524 version: 1.1
V6/V8
Ø28×2
V10
Ø28×2
V13
Ø40×234(3)
V15/V18
Ø50×245(4)
Colour Materal
Max Ambient
Temperature
Sectional
Area
Insulation
Diamer
ROSH
Red/Black PVC 105°C 0.08mm² 0.7mm
Red/Black FEP 200°C 0.52mm² 1.8mm
Black PA66 150°C / /
NOTE: 1. Products recommended storage at 25°C and relative humidity 60%.
2. The connector wire holder unmating force < 0.3kg.
23(2)
ROSH
Suggested
Screw Size
M2.5
Dimension
Colour
Max Ambient
Temperature
Suggested
Torque
N-cm (lbf-in)
YES
Wire_20AWG
Wire_28AWG
Connector
Whtie
PBT
BRHV068-F
BRHV010-C
BRHV013-A
BRHV1518-A
Types
YES
150°C
Product Nomenclature
Order Code
M3
COB
Materal
Order Code
BRCW300-A
Module
The part number is explained as follows: BRHV010-C
Where:
BR –Bridgelux product family
H –Holder
V – V series
010 –V 10 COB
C –Version
Guangzhou Qiaoguang Photoelectricity Technology Co., Ltd
Website : www.opto-source.net E-mail : sales@opto-source.com
Fax : +86-20-8264-3119
20150524 version: 1.1
BRHV068-F
BRHV010-C
Drawings
Guangzhou Qiaoguang Photoelectricity Technology Co., Ltd
Website : www.opto-source.net E-mail : sales@opto-source.com
Fax : +86-20-8264-3119
20150524 version: 1.1
BRHV013-A
BRHV1518-A
Drawings
Guangzhou Qiaoguang Photoelectricity Technology Co., Ltd
Website : www.opto-source.net E-mail : sales@opto-source.com
Fax : +86-20-8264-3119
20150524 version: 1.1
BRCW300-A
Solder
Assemble
Connector
Drawings
The circle must aim at the hole.
This connector
can plug 10 times.
&
Guangzhou Qiaoguang Photoelectricity Technology Co., Ltd
Website : www.opto-source.net E-mail : sales@opto-source.com
Fax : +86-20-8264-3119
20150524 version: 1.1
Mating connection
Figure 1 Figure 2
Optosource Harness Assemblie
Optosource harness simplifies manufacturing by eliminating the necesarry
soldering process from the Lighting manufacturer’s facility.
Align plug on top of receptacle as per
photograph shown in fig.1.Pusg straight
down the plug at highlight area toward the
receptacle to connect.
During mating process, If incase the plug is angle
mated towards the straight part of mating
entrance as in fig. 2, the allowable
angle must not exceeded in 5°.
Guangzhou Qiaoguang Photoelectricity Technology Co., Ltd
Website : www.opto-source.net E-mail : sales@opto-source.com
Fax : +86-20-8264-3119
20150524 version: 1.1
Unmating connection
Figure 3 Figure 4
Figure 5 Figure 6
Hold g entl y on plug w ir es and pull up to
unmate the connector as per fig. 3 shown.
For unmating process, plug wires pull
and stress ang l e must be maint ained
within 15°as per fig.4 s hown.
Connector shall not be unmated
horizontally as shown in fig. 5 to
prevent the damages.
Make cer tai n the ar eas & space where
the connector placed ar e clear and
sufficient to prevent over stress on
plug w ir es as example shown in fig. 6.
Guangzhou Qiaoguang Photoelectricity Technology Co., Ltd
Website : www.opto-source.net E-mail : sales@opto-source.com
Fax : +86-20-8264-3119
20150524 version: 1.1
Screw Head Type
We recomm ends using screws w ith a flat shoulder for mounting holder
modules, see picture below . A wide v ariety of commercial ly av ailable
screws t ypes can be used to meet desi gn requirements. Examples
include pan head, button head, round head, and truss head screws.
Flat head and oval head screws or other screws w it h an angled
surface should not be used.
When selecting a screw, consider screws that have a low profile screw
head. A low profile scr ew head has the advantage of blocking l ess of
the light emit ted from the holder module. A dditional ly , if a secondary
optic is to be used in the application, a low profile screw head allow s
more room for the optical com ponents.
