TGL41-6.8 thru TGL41-200A Vishay General Semiconductor Surface Mount TRANSZORB(R) Transient Voltage Suppressors FEATURES * Plastic MELF package * Ideal for automated placement * Glass passivated chip junction * Available in Unidirectional polarity only * 400 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle): 0.01 % (200 W above 91 V) * Excellent clamping capability * Very fast response time * Low incremental surge resistance * Typical ID less than 1 A above 10 V rating * Meets MSL level 1, per J-STD-020C, LF max peak of 250 C * Solder Dip 260 C, 40 seconds * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC DO-213AB (GL41) TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial and telecommunication. MAJOR RATINGS AND CHARACTERISTICS VBR 6.8 V to 200 V PPPM 400 W, 200 W PD 1.0 W IFSM 40 A Tj max. 150 C MECHANICAL DATA Case: DO-213AB (GL41) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade Polarity: Blue band denotes the cathode which is positive with respect to the anode under normal TVS operation. MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 s waveform (1) (Fig. 1) Power dissipation on infinite heatsink at TL = 75 C Peak pulse current with a 10/1000 s waveform (1) (Fig. 3) Peak forward surge current, 8.3 ms single half sine-wave unidirectional only Maximum instantaneous forward voltage at 25 A for unidirectional only Operating junction and storage temperature range (2) SYMBO VALUE UNIT PPPM Minimum 400 W PD 1.0 W IPPM see next table A IFSM 40 A VF 3.5 V TJ, TSTG - 55 to + 150 C Note: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 C per Fig. 2. Rating is 200 W above 91 V (2) Measured at 8.3 ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minute maximum Document Number 88403 05-Sep-06 www.vishay.com 1 TGL41-6.8 thru TGL41-200A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) DEVICE TYPE BREAKDOWN VOLTAGE VBR (V) MIN (1) TEST CURRENT AT IT (mA) MAX STANDOFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (A) MAXIMUM PEAK PULSE CURRENT IPPM (A) (2) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMPERATURE COEFFICIENT OF VBR (%/C) TGL41-6.8 6.12 7.48 10 5.50 1000 37.0 10.8 0.060 TGL41-6.8A 6.45 7.14 10 5.80 1000 38.1 10.5 0.060 TGL41-7.5 6.75 8.25 10 6.05 500 34.2 11.7 0.064 TGL41-7.5A 7.13 7.88 10 6.40 500 35.4 11.3 0.064 TGL41-8.2 7.38 9.02 10 6.63 200 32.0 12.5 0.068 TGL41-8.2A 7.79 8.61 10 7.02 200 33.1 12.1 0.068 TGL41-9.1 8.19 10.0 1.0 7.37 50.0 29.0 13.8 0.071 TGL41-9.1A 8.65 9.55 1.0 7.78 50.0 29.9 13.4 0.071 TGL41 -10 9.00 11.0 1.0 8.10 10.0 26.7 15.0 0.076 TGL41 -10A 9.50 10.5 1.0 8.55 10.0 27.6 14.5 0.076 TGL41 -11 9.90 12.1 1.0 8.92 5.0 24.7 16.2 0.078 TGL41 -11A 10.5 11.6 1.0 9.40 5.0 25.6 15.6 0.078 TGL41-12 10.8 13.2 1.0 9.72 5.0 23.1 17.3 0.081 TGL41-12A 11.4 12.6 1.0 10.2 5.0 24.0 16.7 0.081 0.084 TGL41-13 11.7 14.3 1.0 10.5 5.0 21.1 19.0 TGL41-13A 12.4 13.7 1.0 11.1 5.0 22.0 18.2 0.084 TGL41-15 13.5 16.5 1.0 12.1 5.0 18.2 22.0 0.087 TGL41-15A 14.3 15.8 1.0 12.8 5.0 18.9 21.2 0.087 TGL41-16 14.4 17.6 1.0 12.9 5.0 17.0 23.5 0.089 TGL41-16A 15.2 16.8 1.0 13.6 5.0 17.8 22.5 0.089 TGL41-18 16.2 19.8 1.0 14.5 5.0 15.1 26.5 0.091 TGL41-18A 17.1 18.9 1.0 15.3 5.0 15.9 25.2 0.091 TGL41-20 18.0 22.0 1.0 16.2 5.0 13.7 29.1 0.093 TGL41-20A 19.0 21.0 1.0 17.1 5.0 14.4 27.7 0.093 0.095 TGL41-22 19.8 24.2 1.0 17.8 5.0 12.5 31.9 TGL41-22A 20.9 23.1 1.0 18.8 5.0 13.1 30.6 0.095 TGL41-24 21.6 26.4 1.0 19.4 5.0 11.5 34.7 0.097 TGL41-24A 22.8 25.2 1.0 20.5 5.0 12.0 33.2 0.097 TGL41-27 24.3 29.7 1.0 21.8 5.0 10.2 39.1 0.099 TGL41-27A 25.7 28.4 1.0 23.1 5.0 10.7 37.5 0.099 0.100 TGL41-30 27.0 33.0 1.0 24.3 5.0 9.2 43.5 TGL41-30A 28.5 31.5 1.0 25.6 5.0 9.7 41.4 0.100 TGL41-33 29.7 36.3 1.0 26.8 5.0 8.4 47.7 0.101 TGL41-33A 31.4 34.7 1.0 28.2 5.0 8.8 45.7 0.101 TGL41-36 32.4 39.6 1.0 29.1 5.0 7.7 52.0 0.102 TGL41-36A 34.2 37.8 1.0 30.8 5.0 8.0 49.9 0.102 TGL41-39 35.1 42.9 1.0 31.6 5.0 7.1 56.4 0.103 TGL41-39A 37.1 41.0 1.0 33.3 5.0 7.4 53.9 0.103 TGL41-43 38.7 47.3 1.0 34.8 5.0 6.5 61.9 0.104 TGL41-43A 40.9 45.2 1.0 36.8 5.0 6.7 59.3 0.104 TGL41-47 42.3 51.7 1.0 38.1 5.0 5.9 67.8 0.104 TGL41-47A 44.7 49.4 1.0 40.2 5.0 6.2 64.8 0.104 www.vishay.com 2 Document Number 88403 05-Sep-06 TGL41-6.8 thru TGL41-200A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) BREAKDOWN VOLTAGE DEVICE TYPE VBR (V) (1) MAXIMUM PEAK PULSE CURRENT TEST CURRENT AT IT (mA) STANDOFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (A) IPPM (A) (2) 41.3 5.0 5.4 MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMPERATURE COEFFICIENT OF VBR (%/C) 73.5 0.105 MIN MAX TGL41-51 45.9 56.1 1.0 TGL41-51A 48.5 53.6 1.0 43.6 5.0 5.7 70.1 0.105 TGL41-56 50.4 61.6 1.0 45.4 5.0 5.0 80.5 0.106 TGL41-56A 53.2 58.8 1.0 47.8 5.0 5.2 77.0 0.106 TGL41-62 55.8 68.2 1.0 50.2 5.0 4.5 89.0 0.107 TGL41-62A 58.9 65.1 1.0 53.0 5.0 4.7 85.0 0.107 TGL41-68 61.2 74.8 1.0 55.1 5.0 4.1 98.0 0.107 TGL41-68A 64.6 71.4 1.0 58.1 5.0 4.3 92.0 0.107 TGL41-75 67.5 82.5 1.0 60.7 5.0 3.7 108 0.108 TGL41-75A 71.3 78.8 1.0 64.1 5.0 3.9 103 0.108 TGL41-82 73.8 90.2 1.0 66.4 5.0 3.4 118 0.108 TGL41-82A 77.9 86.1 1.0 70.1 5.0 3.5 113 0.108 TGL41-91 81.9 100 1.0 73.7 5.0 3.1 131 0.109 TGL41-91A 86.5 95.5 1.0 77.8 5.0 3.2 125 0.109 TGL41-100 90.0 110 1.0 81.0 5.0 1.39 144 0.109 TGL41-100A 95.0 105 1.0 85.5 5.0 1.46 137 0.109 TGL41-110 99.0 121 1.0 89.2 5.0 1.27 158 0.110 TGL41-110A 105 116 1.0 94.0 5.0 1.32 152 0.110 TGL41-120 108 132 1.0 97.2 5.0 1.16 173 0.110 TGL41-120A 114 126 1.0 102 5.0 1.21 165 0.110 TGL41-130 117 143 1.0 105 5.0 1.07 187 0.110 TGL41-130A 124 137 1.0 111 5.0 1.12 179 0.110 TGL41-150 135 165 1.0 121 5.0 0.93 215 0.111 TGL41-150A 143 158 1.0 128 5.0 0.97 207 0.111 TGL41-160 144 176 1.0 130 5.0 0.87 230 0.111 TGL41-160A 152 168 1.0 136 5.0 0.91 219 0.111 TGL41-170 153 187 1.0 138 5.0 0.82 244 0.111 TGL41-170A 162 179 1.0 145 5.0 0.85 234 0.111 TGL41-180 162 198 1.0 146 5.0 0.78 258 0.111 TGL41-180A 171 189 1.0 154 5.0 0.81 246 0.111 TGL41-200 180 220 1.0 162 5.0 0.70 287 0.111 TGL41-200A 190 210 1.0 171 5.0 0.73 274 0.111 Note: (1) Pulse test: tp 50 ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 ORDERING INFORMATION PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE TGL41-6.8A-E3/96 0.134 96 1500 7" Diameter Plastic Tape & Reel TGL41-6.8A-E3/97 0.134 97 5000 13" Diameter Plastic Tape & Reel Document Number 88403 05-Sep-06 www.vishay.com 3 TGL41-6.8 thru TGL41-200A Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise specified) 10000 Non-repetitive Pulse Waveform shown in Fig. 3 TA = 25 C 10 TGL41-6.8 TGL91A 1.0 TGL41-100 0.1 0.1 s TGL200A CJ - Junction Capacitance (pF) PPPM - Peak Pulse Power (kW) 100 Measured at Zero Bias 1000 Measured at Stand-off Voltage VWM 100 Tj = 25 C f = 1.0 MHz Vsq = 50 mVp-p 1.0 s 10 s 100 s 1.0 ms 10 ms 1.0 10 td - Pulse Width (s) 200 Figure 4. Typical Junction Capacitance 100 1.00 PD, Power Dissipation (W) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % 100 V(BR) - Breakdown Voltage (V) Figure 1. Peak Pulse Power Rating Curve 75 50 25 0 0.75 0.50 0.25 0 0 25 50 75 100 125 150 175 200 0 TJ - Initial Temperature (C) 25 50 75 100 125 150 175 200 TL, Lead Temperature (C) Figure 2. Pulse Power or Current versus Initial Junction Temperature Figure 5. Power Derating Curve 150 50 Tj = 25 C Pulse Width (td) is defined as the point where the peak current decays to 50 % of IPPM tr = 10 sec Peak Value IPPM 100 Peak Forward Surge Current (A) IPPM - Peak Pulse Current, % IRSM Unidirectional 10 Half Value - IPP 2 IPPM 50 10/1000 sec Waveform as defined by R.E.A. Tj = Tj max. 8.3 ms Single Half Sine-Wave 40 30 20 10 td 0 0 0 www.vishay.com 4 1.0 2.0 3.0 4.0 1 100 10 t - Time (ms) Number of Cycles at 60 Hz Figure 3. Pulse Waveform Figure 6. Maximum Non-Repetitive Peak Forward Surge Current Unidirectional Only Document Number 88403 05-Sep-06 TGL41-6.8 thru TGL41-200A Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-213AB (GL41) Mounting Pad Layout SOLDERABLE ENDS 1st Band 0 D2 = D1 + - 0.008 (0.20) 0.138 MAX (3.5) MAX D2 0.022 (0.56) 0.018 (0.46) D1 = 0.105 0.095 (2.67) (2.41) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7) 0.118 MIN (3.0) MIN 0.049 MIN (1.25) MIN 0.238 (6.0) REF 1st band denotes type and positive end (cathode) Document Number 88403 05-Sep-06 www.vishay.com 5 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1