Amplifier Transistors
NPN Silicon
MAXIMUM RATINGS
Rating Symbol MPS918 MPS3563 Unit
Collector–Emitter Voltage VCEO 15 12 Vdc
Collector–Base Voltage VCBO 30 30 Vdc
Emitter–Base V oltage VEBO 3.0 2.0 Vdc
Collector Current — Continuous IC50 mAdc
Total Device Dissipation @ TA = 25°C
Derate above 25°CPD350
2.8 mW
mW/°C
Total Device Dissipation @ TC = 25°C
Derate above 25°CPD0.85
6.8 Watts
mW/°C
Operating and Storage Junction
Temperature Range TJ, Tstg –55 to +150 °C
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Thermal Resistance, Junction to Ambient RJA(1) 357 °C/W
Thermal Resistance, Junction to Case RJC 147 °C/W
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic Symbol Min Max Unit
OFF CHARACTERISTICS
Collector–Emitter Breakdown Voltage(2)
(IC = 3.0 mAdc, IB = 0) MPS918
MPS3563
V(BR)CEO 15
12 —
—
Vdc
Collector–Base Breakdown Voltage
(IC = 1.0 Adc, IE = 0) MPS918
(IC = 100 Adc, IE = 0) MPS3563
V(BR)CBO 30
30 —
—
Vdc
Emitter–Base Breakdown Voltage
(IE = 10 Adc, IC = 0) MPS918
MPS3563
V(BR)EBO 3.0
2.0 —
—
Vdc
Collector Cutoff Current
(VCB = 15 Vdc, IE = 0) MPS918
MPS3563
ICBO —
—10
50
nAdc
1. RJA is measured with the device soldered into a typical printed circuit board.
2. Pulse Test: Pulse Width 300 s; Duty Cycle 1.0%.
Preferred devices are ON Semiconductor recommended choices for future use and best overall value.
ON Semiconductor
Semiconductor Components Industries, LLC, 2001
November, 2001 – Rev. 2 1Publication Order Number:
MPS918/D
MPS918
MPS3563
*ON Semiconductor Preferred Device
CASE 29–10, STYLE 1
TO–92 (TO–226AL)
123
*
COLLECTOR
3
2
BASE
1
EMITTER
MPS918 MPS3563
http://onsemi.com
2
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued)
Characteristic Symbol Min Max Unit
ON CHARACTERISTICS
DC Current Gain(2)
(IC = 3.0 mAdc, VCE = 1.0 Vdc) MPS918
(IC = 8.0 mAdc, VCE = 10 Vdc) MPS3563
hFE 20
20 —
200
—
Collector–Emitter Saturation Voltage
(IC = 10 mAdc, IB = 1.0 mAdc) MPS918 VCE(sat) — 0.4 Vdc
Base–Emitter Saturation Voltage
(IC = 10 mAdc, IB = 1.0 mAdc) MPS918 VBE(sat) — 1.0 Vdc
SMALL–SIGNAL CHARACTERISTICS
Current–Gain — Bandwidth Product(2)
(IC = 4.0 mAdc, VCE = 10 Vdc, f = 100 MHz) MPS918
(IC = 8.0 mAdc, VCE = 10 Vdc, f = 100 MHz) MPS3563
fT600
600 —
1500
MHz
Output Capacitance
(VCB = 0 Vdc, IE = 0, f = 1.0 MHz) MPS918
(VCB = 10 Vdc, IE = 0, f = 1.0 MHz) MPS918
(VCB = 10 Vdc, IE = 0, f = 1.0 MHz) MPS3563
Cobo —
—
—
3.0
1.7
1.7
pF
Input Capacitance
(VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) MPS918 Cibo — 2.0 pF
Small–Signal Current Gain
(IC = 8.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) MPS3563 hfe 20 250 —
Noise Figure
(IC = 1.0 mAdc, VCE = 6.0 Vdc, RS = 400 kΩ, f = 60 MHz) MPS918 NF — 6.0 dB
FUNCTIONAL TEST
Common–Emitter Amplifier Power Gain
(IC = 6.0 mAdc, VCB = 12 Vdc, f = 200 MHz) MPS918
(IC = 8.0 mAdc, VCE = 10 Vdc, f = 200 MHz) MPS3563
(Gfd + Gre –20 dB)
Gpe 15
14 —
—
dB
Power Output
(IC = 8.0 mAdc, VCB = 15 Vdc, f = 500 MHz) MPS918 Pout 30 — mW
Oscillator Collector Efficiency
(IC = 8.0 mAdc, VCB = 15 Vdc, Pout = 30 mW, f = 500 MHz) MPS918 η25 — %
2. Pulse Test: Pulse Width 300 s; Duty Cycle 1.0%.
MPS918 MPS3563
http://onsemi.com
3
PACKAGE DIMENSIONS
CASE 29–10
ISSUE AL
TO–92 (TO–226)
C
R
N
N
1
J
SECTION X–X
D
23
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. DIMENSION F APPLIES BETWEEN P AND L.
DIMENSIONS D AND J APPLY BETWEEN L AND K
MIMIMUM. LEAD DIMENSION IS UNCONTROLLED
IN P AND BEYOND DIMENSION K MINIMUM.
R
A
PL
F
B
K
G
H
XX
SEATING
PLANE
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.175 0.205 4.44 5.21
B0.290 0.310 7.37 7.87
C0.125 0.165 3.18 4.19
D0.018 0.021 0.457 0.533
F0.016 0.019 0.407 0.482
G0.045 0.055 1.15 1.39
H0.095 0.105 2.42 2.66
J0.018 0.024 0.46 0.61
K0.500 --- 12.70 ---
L0.250 --- 6.35 ---
N0.080 0.105 2.04 2.66
P--- 0.100 --- 2.54
R0.135 --- 3.43 ---
TYLE 1:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
MPS918 MPS3563
http://onsemi.com
4
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: r14525@onsemi.com
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
MPS918/D
Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
