TTC008(Q) - TOSHIBA - Pdf.Support

TTC008

Bipolar Transistors Silicon NPN Triple-Diffused Type

TTC008

Start of commercial production

2010-05

1. Applications

Applications

• High-Speed High-Voltage Switching

• Switching Voltage Regulators

• High-Speed DC-DC Converters

2. Features

Features

(1) High collector-emitter voltage: VCEO = 285 V, VCES = 600 V

(2) High DC current gain: hFE = 100 to 200 (IC = 0.3 A)

(3) Excellent switching times: tf = 0.1 µs (typ.)

3. Packaging and Internal Circuit

Packaging and Internal Circuit

New PW-Mold2

1. Base

2. Collector

3. Emitter

2014-04-03

Rev.2.0

TTC008

4. Absolute Maximum Ratings (Note) (T

Absolute Maximum Ratings (Note) (T

Absolute Maximum Ratings (Note) (Ta

a = 25

= 25

= 25 



 unless otherwise specified)

unless otherwise specified)

Characteristics

Collector-base voltage

Collector-emitter voltage

Emitter-base voltage

Collector current (DC)

Collector current (pulsed)

Base current

Collector power dissipation

Junction temperature

Storage temperature

(Note 1)

Symbol

VCBO

VCES

VCEO

VEBO

ICP

Tstg

Rating

600

285

1.5

0.75

1.1

150

-55 to 150

Unit



Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even

if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum

ratings.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test

report and estimated failure rate, etc).

Note 1: Ensure that the junction temperature does not exceed 150 .

2014-04-03

Rev.2.0

TTC008

5. Electrical Characteristics

Electrical Characteristics

5.1.

5.1. Static Characteristics (T

Static Characteristics (T

Static Characteristics (Ta

a = 25

= 25

= 25 



 unless otherwise specified)

unless otherwise specified)

Characteristics

Collector cut-off current

Emitter cut-off current

Collector-base breakdown voltage

Collector-emitter breakdown voltage

DC current gain

Collector-emitter saturation voltage

Base-emitter saturation voltage

Symbol

ICBO

IEBO

V(BR)CBO

V(BR)CEO

hFE(1)

hFE(2)

VCE(sat)

VBE(sat)

Test Condition

VCB = 600 V, IE = 0 A

VEB = 7 V, IC = 0 A

IC = 1 mA, IE = 0 A

IC = 10 mA, IB = 0 A

VCE = 5 V, IC = 1 mA

VCE = 5 V, IC = 0.3 A

IC = 0.5 A, IB = 62.5 mA

Min



600

285

100



Typ.



Max

100



250

200

1.0

1.3

Unit

µA



5.2.

5.2. Dynamic Characteristics (T

Dynamic Characteristics (T

Dynamic Characteristics (Ta

a = 25

= 25

= 25 



 unless otherwise specified)

unless otherwise specified)

Characteristics

Switching time (rise time)

Switching time (storage time)

Switching time (fall time)

Symbol

tstg

Test Condition

See Figure 5.2.1.

Min



Typ.

0.05

3.3

0.1

Max



Unit

µs

Fig.

Fig. 5.2.1

5.2.1

5.2.1 Switching Time Test Circuit

Switching Time Test Circuit

6. Marking (Note)

Marking (Note)

Fig.

Fig. 6.1

6.1

6.1 Marking

Marking

Note: A line under a Lot No. identifies the indication of product Labels.

Not underlined: [[Pb]]/INCLUDES > MCV

Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]

Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS

compatibility of Product.

The RoHS is the Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the

restriction of the use of certain hazardous substances in electrical and electronic equipment.

2014-04-03

Rev.2.0

TTC008

7. Characteristics Curves (Note)

Characteristics Curves (Note)

Fig.

Fig. 7.1

7.1

7.1 I

C - V

- V

- VCE

CE Fig.

Fig.

Fig. 7.2

7.2

7.2 h

hFE

FE - I

- I

- IC

Fig.

Fig. 7.3

7.3

7.3 V

VCE(sat)

CE(sat)

CE(sat) - I

- I

- IC

CFig.

Fig.

Fig. 7.4

7.4

7.4 V

VBE(sat)

BE(sat)

BE(sat) - I

- I

- IC

Fig.

Fig. 7.5

7.5

7.5 I

C - V

- V

- VBE

2014-04-03

Rev.2.0

TTC008

Fig.

Fig. 7.6

7.6

7.6 r

rth(j-a)

th(j-a)

th(j-a) - t

- t

- tw

(Guaranteed Maximum)

Fig.

Fig. 7.7

7.7

7.7 Safe Operating Area

Safe Operating Area

(Guaranteed Maximum)

Note: The above characteristics curves are presented for reference only and not guaranteed by production test,

unless otherwise noted.

2014-04-03

Rev.2.0

TTC008

Package Dimensions

Unit: mm

Weight: 0.36 g (typ.)

Package Name(s)

TOSHIBA: 2-7J2S

Nickname: New PW-Mold2

2014-04-03

Rev.2.0

TTC008

RESTRICTIONS ON PRODUCT USE

• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively "Product") without notice.

• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's

written permission, reproduction is permissible only if reproduction is without alteration/omission.

• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible

for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which

minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage

to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate

the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA

information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the

precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application

with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,

including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating

and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample

application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.

TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.

• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE

PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE

EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY

CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT

("UNINTENDED USE").

("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation,

equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles,

trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices,

elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR

IF YOU USE PRODUCT FOR

UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.

UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales

representative.

• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any

intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,

INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING

WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND

(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,

OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,

for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products

(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and

regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration

Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all

applicable export laws and regulations.

• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING

TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING

AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.

2014-04-03

Rev.2.0