AC axial fan A4E450-AP01-01 sickled blades (S series) ebm-papst Mulfingen GmbH & Co. KG Bachmuhle 2 * D-74673 Mulfingen Phone +49 7938 81-0 Fax +49 7938 81-110 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership * Headquarters Mulfingen County court Stuttgart * HRA 590344 General partner Elektrobau Mulfingen GmbH * Headquarters Mulfingen County court Stuttgart * HRB 590142 Nominal data Type A4E450-AP01-01 Motor M4E074-GA Phase 1~ 1~ Nominal voltage VAC 230 230 Frequency Hz 50 60 Type of data definition fa fa Valid for approval / standard CE CE Speed min-1 1400 1600 Power input W 245 355 Current draw A 1.1 1.55 Motor capacitor F 8 8 Capacitor voltage VDB 400 400 Max. back pressure Pa 85 35 Min. ambient temperature C -25 -25 Max. ambient temperature C 60 40 Starting current A 2.8 2.6 ml = max. load * me = max. efficiency * fa = running at free air * cs = customer specs * cu = customer unit Subject to alterations Data according to ErP directive Actual Request 2013 Request 2015 Installation category A Overall efficiency es 32.2 26.5 30.5 Efficiency category Static Efficiency grade N 41.7 36 40 Variable speed drive No Power input Pe kW 0.32 Specific ratio* 1.00 Air flow qv m/h 3690 Pressure increase pfs Pa 101 Speed n min-1 1325 * Specific ratio = 1 + pfs / 100 000 Pa Data established at point of optimum efficiency Item no. 10323-5-9980 * Revision 68177 * Release 2011-06-14 * Page 1 / 5 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com AC axial fan A4E450-AP01-01 sickled blades (S series) Technical features Mass 5.0 kg Size 450 mm Surface of rotor Coated in black Material of blades Sheet steel, coated in black Number of blades 5 Direction of air flow "V" Direction of rotation Counter-clockwise, seen on rotor Type of protection IP 44 Insulation class "F" Humidity class F1-2 Max. permissible ambient motor temp. (transp./ storage) + 80 C Min. permissible ambient motor temp. (transp./storage) - 40 C Mounting position Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharge holes Rotor-side Operation mode S1 Motor bearing Ball bearing Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) < 0.75 mA Motor protection Thermal overload protector (TOP) wired internally Cable exit Variable Protection class I (if protective earth is connected by customer) Product conforming to standard EN 60335-1; CE Approval CCC Item no. 10323-5-9980 * Revision 68177 * Release 2011-06-14 * Page 2 / 5 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com AC axial fan A4E450-AP01-01 sickled blades (S series) Product drawing 1 Connection line silicone, 4x brass lead tips crimped 2 Direction of air flow V 3 Screw depth max. 10 mm Connection screen U1 blue PE green/yellow Z brown U2 black Item no. 10323-5-9980 * Revision 68177 * Release 2011-06-14 * Page 3 / 5 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com AC axial fan A4E450-AP01-01 sickled blades (S series) Charts: Air flow 50 Hz Druck p f s[Pa]fur Rho=1,2kg/m^3 210 0 500 1.000 qv[cfm] 2.000 1.500 2.500 3.000 3.500 200 0,8 190 0,75 Measurement: LU-33262 180 0,7 170 160 0,65 150 0,6 140 0,55 130 0,5 0,45 110 100 0,4 90 4 p fs_E[IN H2O] pf s[Pa] 120 Air performance measured as per ISO 5801 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 13347 / LpA measured with 1m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. 0,35 80 0,3 70 3 60 0,25 50 0,2 40 0,15 2 30 0,1 20 0 ] [Pa pf s 10 1 0 500 1.000 1.500 2.000 2.500 3.000 3.500 qv[m^3/h] 4.000 4.500 5.000 5.500 6.000 0,05 0 Measured values U f n Pe I qv pfs V Hz min-1 W A m3/h Pa 1 230 50 1400 245 1.10 5705 0 2 230 50 1385 264 1.19 5255 30 3 230 50 1365 285 1.27 4720 60 4 230 50 1345 303 1.35 4175 85 U = Supply voltage * f = Frequency * n = Speed * Pe = Power input * I = Current draw * qv = Air flow * pfs = Pressure increase Item no. 10323-5-9980 * Revision 68177 * Release 2011-06-14 * Page 4 / 5 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com AC axial fan A4E450-AP01-01 sickled blades (S series) Charts: Air flow 60 Hz Druck p f s[Pa]fur Rho=1,2kg/m^3 500 1.000 qv[cfm] 2.000 1.500 2.500 3.000 3.500 4.000 0,6 145 0,58 140 0,56 135 0,54 130 0,52 125 0,5 120 0,48 115 0,46 110 0,44 105 0,42 100 0,4 95 0,38 90 0,36 85 0,34 80 0,32 75 0,3 70 0,28 65 0,26 60 0,24 55 0,22 50 0,2 45 p fs_E[IN H2O] pf s[Pa] 150 0 Air performance measured as per ISO 5801 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 13347 / LpA measured with 1m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. 0,18 40 0,16 3 35 0,14 30 0,12 25 0,1 2 20 0,08 0,06 10 0,04 a] pf s[P 15 5 0 Measurement: LU-33263 1 0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 qv[m^3/h] 4.500 5.000 5.500 6.000 6.500 0,02 0 7.000 Measured values U f n Pe I qv pfs V Hz min-1 W A m3/h Pa 1 230 60 1600 355 1.55 6495 0 2 230 60 1580 364 1.58 6175 20 3 230 60 1560 376 1.63 5925 35 U = Supply voltage * f = Frequency * n = Speed * Pe = Power input * I = Current draw * qv = Air flow * pfs = Pressure increase Item no. 10323-5-9980 * Revision 68177 * Release 2011-06-14 * Page 5 / 5 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com