Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E6.pdf 01.9.27 Ceramic Trimmer Capacitors TZ03 Series 2.50.2 dia. 0.50.2 Depth 0.5 min. Features 4 6 dia. 1. Color coded case facilitates identification of capacitance range. 2. Sealed construction prevents the penetration of flux and dust. 3. Available in three adjustment styles : Top / Rear / Side. 4. Available in both tape and reel and magazine packaging for automatic insertion. 5. +(Cross-shaped) slot enables automatic adjustment. 6 6.6 1.20.1 0.250.05 0.20.05 1.00.1 3.5 4.8 3.3 3.1 B Type Tolerance:0.5 in mm Applications 2.50.2 dia. *Car audio systems *Car clocks *Stereos *Radio cassette tape recorders *Cordless telephones *Video games *Compact radio equipments *Remote keyless entry systems *Burglarproof devices 4 6 dia. 0.50.2 Depth 0.5 min . E Type 1.00.1 3.5 4.8 6 1.00.1 Tolerance:0.5 in mm 0.20.05 2.50.2 dia. 0.50.2 Depth 0.5 min. 4.0 6.0 dia. 2.50.2 dia. 0.50.2 Depth 0.5 min. 4 6 dia. 0.250.05 6.0 6 7.8 6.4 3.4 5 0.2 5 0.2 0 0. 0.0 5 1.20.1 1.00.1 4.8 7 F Type 0.2 1.00.1 5 0.0 N Type 5 6.6 4.8 1.00.1 3.3 .05 0 0.2 3.0 3.0 Tolerance:0.5 in mm Tolerance:0.5 in mm 2.50.2 dia. 0.50.2 Depth 0.5 min. Trimmer Cap. Body 2.50.2 dia. 2.5 6 3.2 Socket 4 7.2 4 6.0 dia. 0.50.2 Depth 0.5 min. 3.7 5 6.1 1.3 4.8 1.2 1.2 3 1.4 6.0 1.2 7 3.5 0.3 4.5 7.5 Solder T Type 2.50.3 Tolerance:0.5 in mm 34 Y Type Tolerance:0.5 in mm Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E6.pdf 01.9.27 Cmin. (pF) Cmax. (pF) TC Q TZ03Z2R3p169 1.25 max. 2.3 +50/-0% NP0200ppm/C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Black TZ03Z050p169 1.5 max. 5.0 +50/-0% NP0200ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZ03Z070p169 2.0 max. 7.0 +50/-0% NP0200ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZ03N100p169 2.1 max. 10.0 +50/-0% N200200ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc White TZ03Z100p169 2.7 max. 10.0 +50/-0% NP0200ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZ03T110p169 3.0 max. 11.0 +50/-0% N450300ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc White TZ03R200p169 4.2 max. 20.0 +50/-0% N750300ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Red TZ03T200p169 4.2 max. 20.0 +50/-0% N450300ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Pink TZ03R300p169 5.2 max. 30.0 +50/-0% N750300ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Green TZ03P450p169 6.8 max. 45.0 +50/-0% N1200500ppm/C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Yellow TZ03P600p169 9.8 max. 60.0 +50/-0% N1200500ppm/C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Brown TZ03Z500p169 6.0 max. 50.0 +100/-0% NP0300ppm/C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Orange TZ03R900p169 9.0 max. 90.0 +100/-0% N750300ppm/C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Black+Dot TZ03R121p169 10.0 max. 120.0 +100/-0% N750300ppm/C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Black Part Number Insulation Resistance : 10000M ohm min. Torque : 2.0~15.0mNm A blank column is filled with terminal type codes. Rated Withstanding Voltage Voltage Stator/Case Color Operating Temperature Range : -25~+85C Construction Mounting Holes B Type E Type 7 a. .1 0 1. 2 1.30.1 1. 2 0 .1 di 10.1 di a. 3 dia. 3 3.3 5 6.3 Tolerance:0.5 in mm Tolerance:0.5 in mm Continued on the following page. 35 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E6.pdf 01.9.27 Continued from the preceding page. Mounting Holes F Type N Type 3 dia. di a. 0. 1 1.30.1 1. 3 1. 3 0. 1 di a . 10.1 3 3.3 5 Tolerance:0.5 in mm Tolerance:0.5 in mm di a. Y Type 1. 4 1. 4 1. 1. 0 0 0. 1 0. 1 di di a a. . 0. 1 0. 1 di a . T Type 5 5.00.2 Tolerance:0.5 in mm (in mm) Temperature Characteristics Z070 (NP0200ppm/C) +4 +2 55 +2 85 20 7 55 20 0 0 -25 Cap.Change (%) +4 +6 -25 -2 0 0 Temp. (C) -2 -4 -4 -6 -6 P600 (N1200500ppm/C) +4 +2 Cap.Change (%) R200 (N750300ppm/C) +6 Temp. (C) 85 +8 +6 +4 Cap.Change (%) +6 Cap.Change (%) T110 (N450300ppm/C) +2 20 -25 0 0 55 85 Temp. (C) 20 -25 0 0 55 85 Temp. (C) -2 -2 -4 -4 -6 -6 -8 -10 Continued on the following page. 36 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E6.pdf 01.9.27 Continued from the preceding page. Temperature Characteristics Z500 (NP0300ppm/C) +4 +2 +8 +6 +4 55 85 +2 20 -25 0 20 0 -2 Cap.Change (%) +6 R121 (N750300ppm/C) Cap.Change (%) +8 -25 Temp. (C) 0 55 0 -2 -4 -4 -6 -6 -8 -8 -10 -10 85 Temp. (C) Frequency Characteristics 1000 100 100 Q 10 Capacitance(pF) 1000 1000 100 100 10 10 Q 10 1 1000 100 200 300 400 500 600 700 800 900 1000 1 Capacitance (pF) T110 Z070 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) Frequency(MHz) R200 P450 1000 100 100 Q 10 10 1 100 200 300 Frequency (MHz) 400 500 1000 1000 100 100 10 10 Q 1 100 200 300 400 Capacitance (pF) 1000 Capacitance (pF) 7 500 Frequency (MHz) Continued on the following page. 37 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E6.pdf 01.9.27 Continued from the preceding page. Frequency Characteristics P600 1000 100 100 Q 1 100 200 300 400 1000 100 100 10 10 Q 10 10 1000 500 1 100 200 300 400 Capacitance (pF) 1000 Capacitance (pF) R900 500 Frequency (MHz) Frequency (MHz) Temperature Profile Flow Preheating (in air) Solderring 60 sec. to 120 sec. 5 sec. max. 250 Gradual Cooling (in air) Temperature (C) 200 100 0 Screwdriver and Screwdriver Bit Screwdriver for Manual Adjustment Murata Part No. : KMDR010 Screwdriver Bit for Automatic Adjustment Murata Part No. : KMBT010 122 30 50 20 Bit shape ; Bit shape ; Minus (2.2x0.4) (in mm) 38 Minus (2.2x0.4) 2.2 dia. 7 Please use the following recommended screwdriver. You can order this driver with below part number. Though you can also adjust the capacitance value by commercial products, please use one which has the same head size as the below driver. (in mm) Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E6.pdf 01.9.27 Notice (Storage and operating condition) 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitor, please store under the condition of -10 to +40 C. and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of deliverly. 5. Open the package just before using. 6. Prior to storing previously opened packages, the packaging should be heat-sealed. Avoid using rubber bands for repackage. 7. Do not store under direct sunlight. 8. Do not use the trimmer capacitor under the conditions listed below. *Corrosive gasses atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxie gas, etc.) *In liquid (Ex. water, oil, medical liquid, organic solvent, etc.) *Dusty / dirty atmosphere *Direct sunlight *Static voltage nor electric/magnetic fields *Direct sea breeze *Other variations of the above Notice (Soldering) 1. Soldering (1)TZ03 series can be soldered by flow soldering method and soldering iron. Do not use reflow soldering method. (2)Standard soldering condition (a)Flow soldering : Refer to the standard temperature profile. (b)Soldering iron : >Temperature of tip 260+-10 C. >Soldering time 3 sec. max. >Diameter 3mm max. >Wattage of iron 30W max. Before using other soldering conditions than those listed above, please consult with Murata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specified characteristics. (3)The dimension of mounting hole should be used Murata's standard mounting hole at flow soldering. The amount of solder is critical. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause the bridging between the terminals or the contact failure due to flux wicking up. (4)When using soldering iron, the string solder shall be applied to the lower part of the terminal only and do not apply flux except the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fixed rotor or the contact failure due to flux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the plastic case of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (5)Our recommendable chlorine content of string solder is 0.5wt% max. (6)Do not use water-soluble flux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply flux only to terminals. 2. Mounting (1)Do not apply excessive force (preferable 5.0N (Ref.; 500gf)max.), when the trimmer capacitor is mounted on the PCB. (2)Use the suitable PCB holes which are the same pitch as the terminal of the trimmer capacitor. If it would not fit with the terminal, the excessive stress would be applied to the terminal and the trimmer capacitor may deviate from the specified characteristics. (3)Do not apply bending stress more than 10.0N (Ref.; 1kgf) after the trimmer capacitor has been mounted on the PCB. (4)Mount trimmer capacitor in contact with PCB. (5)In case of bending the terminals, do not apply excessive force to the body of the product and prevent the terminal fixing part from damaging. 3. Cleaning [with cover film type] (1)Isopropyl alcohol and Ethyl alcohol are available material for cleaning. Water group material like Pinealpha, Cleanthru can not be used. For other materials, please consult with Murata factory representative prior to using. (2)The total cleaning time by dipping, vapor and ultra-sonic method shall be less than 2 minutes. For ultra-sonic cleaning, the available condition is as follows. >Cleaning time : 30 sec. max. >Power : 20W/liter max. >Frequency : 20 - 60kHz >Temperature : Ambient temperature Due to the ultra-sonic cleaning equipment peculiar self resonance point and the cleaning compatibility usually depends on the jig construction and/or the cleaning condition such as the depth of immersion, please check the cleaning equipment to determine the suitable conditions. If the trimmer capacitor is cleaned by other conditions, the trimmer capacitor may deviate from the specified characteristics. 4. Other Note the polarity of the trimmer capacitor to minimize influence by stray capacitance. (Refer to the dimensions concerning the polarity.) 7 39 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E6.pdf 01.9.27 Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. (1) Recommended screwdriver for manual adjustment MURATA : KMDR010 (2) Recommended screwdriver bit for automatic adjustment MURATA : KMBT010 2. When adjusting with a screwdriver, do not apply Notice (Other) Before using trimmer capacitor, please test after assembly in your particular mass production system. 7 40 excessive force(preferable 1.0N(Ref;100gf) max.) to minimize capacitance drift. If excessive force applied to the screwdriver slot, it may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems.