Double-Sided Chip Resistors
DSC Series
Two parallel resistance elements in a single chip
Excellent pulse withstand performance
Laser trimmed up to 0.5% tolerance
Enhanced working voltage
Enhancedpowerrang
Pb-freeterminaons
An-sulphurversionavailable.
215201026021
5.157.033.0sttaWC°07@ rewoP
4.97.41.2sttaWC°52@ rewop daolrevo dnoces 2
shparg eeSecnamrofrep eslup trohS
7M4 ot 0R1smhOegnar ecnatsiseR
5 ,1 :seulav llA ,5.0 :M1 ot R01%ecnareloT
005004002stloVVEL
001:R01> 002:R01< C°/mppRCT
551+ ot 55- C°erutarepmet gnitarepO
005stloVegatlov dnatshtiw cirtceleiD
0508061W/C°ecnadepmI lamrehT
Pad & trace area for rated power* mm20010605
0805
0.25
1.6
1R0 to 1M0
210
150
40
redro laiceps ot seulav rehto - derreferp 69 ro 42EseulaV
Double-Sided
Chip Resistors
DSC Series
Two parallel resistance elements
in a single chip
Excellent pulse withstand performance
Laser trimmed up to 0.5% tolerance
Enhanced working voltage
Enhanced power rating
Pb-free terminations
General Note
Welwyn Components reserves the right to make changes in product specification without notice or liability.
All information is subject to Welwyn’s own data and is considered accurate at time of going to print.
© Welwyn Components Limited · Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com
Electrical Data
04. 08
A subsidiary of
TT electronics plc
Welwyn Components
Dimensions (mm) & Weight (g)
L W T max A B min C Wt.
1206 3.2±0.4 1.6±0.2 0.7 0.4±0.2 1.7 0.4±0.15 0.020
0805 2.0±0.3 1.25±0.2 0.7 0.3±0.15 0.9 0.3±0.15 0.012
2010 5.1±0.3 2.5±0.2 0.8 0.6±0.3 3.0 0.6±0.25 0.036
2512 6.5±0.3 3.2±0.2 0.8 0.6±0.3 4.4 0.6±0.25 0.055
Physical Data
_
*Recommended minimum pad & adjacent trace area for each termination for rated power dissipation on FR4 PCB
Construction
Thick film resistor material, overglaze and organic protection are screen printed on a 96% alumina substrate. Wrap-around terminations
have an electroplated nickel barrier and Pb-free solderable coating, this ensures excellent ‘leach’ resistance properties and solderability.
Marking
Components are not marked. Reels are marked with type, value, tolerance, date code and quantity.
Solvent Resistance
The body protection is resistant to all normal industrial cleaning solvents suitable for printed circuits.
T
W
A
A
B
L
Wrap-around terminations
(3 faces)
C
Make Possible
Resistors
AllPb-freepartscomplywithEUDirecve2011/65/EU(RoHS2)
07.14
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com
Double Sided
Chip Resistors
DSC Series
Double Sided
Chip Resistors
DSC Series
© Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com 07. 08
Welwyn Components
Performance Data
Pulse Performance
Data
Lightning Surge
Resistors are tested in
accordance with IEC 60 115-1 using
both 1.2/50µs and 10/700µs pulse
shapes. 10 pulses are applied. The
limit of acceptance is a shift in
resistance of less than 1% from the
initial value.
10
100
1,000
10,000
1 10 100 1,00010,000100,000 1,000,000 10,000,000
Peak Voltage (V)
Value (ohms)
1.2/50µs Lightning Surge
0805
1206
2010
2512
10
100
1,000
10,000
10 100 1,00010,000100,000 1,000,000 10,000,000
Value (ohms)
10/700µs Lightning Surge
0805
1206
2010
2512
Maximum Typical
Loadatratedpower:1000hoursat70°C ΔR%1 0.25
Derangfromratedpowerat70°C ΔR%Zeroat155°C
Overload:6.25xratedpowerfor2seconds 1 0.1
Shelflifetest:12monthsatroomtemperature ΔR%0.1 0.02
Dryheat:1000hoursat155°C ΔR%1 0.2
Long term damp heat ΔR%1 0.25
Temperature rapid change ΔR%0.25 0.05
Resistancetosulphur-bearinggas(ASversiononly):ASTM-
B-809
0.25 0.05
Note:A0.01Ohmaddiontobeaddedtotheperformanceofallresistors<10Ohms.
Make Possible
07.14
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com
Double Sided
Chip Resistors
DSC Series
Double Sided
Chip Resistors
DSC Series
© Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com 07.08
Single Pulse
The single impulse graph is the
result of 50 impulses of rectangular
shape applied at one-minute
intervals. The limit of acceptance
was a shift in resistance of less
than 1% from the initial value.
Continuous Load Due
to Repetitive Pulses
The continuous load graph was
obtained by applying repetitive
rectangular pulses where the pulse
period was adjusted so that the
average power dissipated in the
resistor was equal to its rated power
at 70°C. Again the limit of acceptance
was a shift in resistance of less than
1% from the initial value.
100
1,000
10,000
1 10 100 1,00010,000100,000 1,000,000 10,000,000
Peak Voltage (V)
Value (ohms)
DSC2512 - Bellcore GR1089 Lightning Surge
2/10µs
10/1000µs
1
10
100
1000
0.0001 0.001 0.01 0.1 1
Peak Power (W)
Pulse Duration (s)
Single Pulse
0805
1206
2010
2512
0.1
1
10
100
1000
0.0001 0.001 0.01 0.1 1
Peak Power (W)
Pulse Duration (s)
Continuous Pulses
0805
1206
2010
2512
Make Possible
07.14
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com
Double Sided
Chip Resistors
DSC Series
Double Sided
Chip Resistors
DSC Series
© Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com 07. 08
Welwyn Components
Thermal Performance Data
Ambient Temperature/°C
% of Rated Power
125
100
75
50
25
0
-15 70 155
Temperature Derating Curve
Packaging
0805 and1206 DSC series resistors are supplied on 8mm carrier tape and 7 inch reels as per IEC 286-3, quantity per reel; 3000.
2010 and 2512 DSC series resistors are supplied on 12mm carrier tape and 7 inch reels as per IEC 286-3, quantity per reel;
2010 : 3000pcs; 2512 : 1800pcs. Reels of 1000pcs are available on request.
0
10
20
30
40
50
60
70
80
0 0.5 1 1.5
Temperature Rise ( °C)
Power Dissipation (W)
Temperature Rise Curves
0805
1206
2010
2512
Make Possible
07.14
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com
Double Sided
Chip Resistors
DSC Series
Type DSC 2512 - 10K F T 1 8
Size
Termination
Value (use IEC62 code)
Tolerance (use IEC62 code)
Packing
D 0.5%
F 1%
J 5%
T3
Tape
0805, 1206 or 2010
0805, 1206, 2010 or 2512
3000/reel
Standard
T18
T1
2512 1800/reel
1000/reel
Ordering Procedure
Double Sided
Chip Resistors
DSC Series
© Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com 07. 08
Welwyn Components
Application Notes
DSC resistors are ideally suited for handling by automatic
methods due to their rectangular shape and the small
dimensional tolerances. Electrical connection to a ceramic
substrate or to a printed circuit board can be made by reflow
or wave soldering of wrap-around terminations.
Wrap-around terminations provide good leach properties and
ensure reliable contact. Due to the robust construction, the
DSC can be immersed in the solder bath for 30 seconds at
260°C. This enables the resistor to be mounted on one side
Specify type reference etc as shown in this example of DSC2512 10K ohms 1%.
of a printed circuit board and wire-leaded components
applied on the other side. DSC is compatible with typical
Pb-free soldering materials and temperature profiles
DSC resistors themselves can operate at a maximum
temperature of 155°C. For soldered resistors, the joint
temperature should not exceed 110°C. This condition is met
when the stated power levels at 70°C and recommended
pad and trace areas are used. Allowance should be made
if smaller areas of copper are used.
AS
Standard terminations
Anti-sulphur terminations
Make Possible
07.14
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com