www.tracopower.com Page 1
Features
Full SMD design with Ceramic Capacitors
Wide 2:1 Input range
High Efficiency
Short Circuit Protection
Dual Output Models with galvanic isolated
Outputs
Metal Case, 24–Pin DIP
2 Year Product Warranty
Models
Ordercode Input voltage range Output voltage Output current max. Efficiency typ.
TED 0511 5 VDC 400 mA 64 %
TED 0512 12 VDC 16 0 mA 66 %
TED 0514 4.5 – 5.5 VDC 24 VDC 80 mA 66 %
TED 0521 ±12 VDC ± 80 mA 64 %
TED 0522 ±15 VDC ± 65 mA 64 %
TED 1211 5 VDC 400 mA 76 %
TED 1212 12 VDC 16 0 mA 78 %
TED 1214 9 – 18 VDC 24 VDC 80 mA 78 %
TED 1221 ±12 VDC ± 80 mA 72 %
TED 1222 ±15 VDC ± 65 mA 72 %
TED 2411 5 VDC 400 mA 77 %
TED 2412 12 VDC 16 0 mA 78 %
TED 2414 18 – 36 VDC 24 VDC 80 mA 78 %
TED 2421 ±12 VDC ± 80 mA 73 %
TED 2422 ±15 VDC ± 65 mA 73 %
DC/DC Converter
TED Series 2 Watt
The TED-series are high performance, isolated DC/DC-converters with
wide 2 :1 input range. They are ideally suited for distributed power
systems in telecommunications, industrial electronics and test equip-
ment. Full SMT-design with exclusive use of ceramic chip-capacitors
guarantees very high reliability with a calculated MTBF of over 1Mil.h.
A highly automated production with 100% parameter test of each
converter ensures the high quality standard of this product.
www.tracopower.com Page 2
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Conver ter
TED Series 2 Watt
Input Specifications
Input current no load 5 Vin models: 140 mA typ.
12 Vin models: 25 mA typ.
24 Vin models: 15 mA typ.
Input current full load 5 Vin models: 650 mA typ.
12 Vin models: 255 mA typ.
24 Vin models: 125 mA typ.
Input filter Pi-Filter
Output Specifications
Voltage set accuracy ± 2 %
Regulation – Input variation Vin min. to Vin max. ± 0.5 % max.
– Load variation 10 – 90 %: single output: ± 1.0 % max.
dual output: ± 2.0 % max.
Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max.
Temperature coefficient ± 0.05 % / °C
Short circuit protection continuous
Capacitive load – Single output models 2200 µF max.
– Dual output models 2200 µF max.
General Specifications
Temperature ranges – Operating –25 °C ... +75 °C
– Case + 95 °C
– Storage –40 °C ... +115 °C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217E) >1’000’000 h @ 25 °C
Isolation voltage – Input/Output 500 VDC
– Input/Case 500 VDC
– Output/Case 500 VDC
– Output/Output 500 VDC (dual output)
Isolation capacity – Input/Output 470 pF typ.
Isolation resistance – Input/Output >1‘000 M Ohm
Switching frequency 200 – 750 KHz (depending on load)
Page 3
Specifications can be changed without notice
Outline Dimensions mm (inches)
Jenatschstrasse 1 • CH-8002 Zurich • Switzerland
Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: sales@traco.ch • internet: http://www.tracopower.com
Rev. 12/01
DC/DC Conver ter
TED Series 2 Watt
Physical Specifications
Case material Steel nickel-plated
Potting material Silicon rubber TSE (UL 94V-O)
Weight 14 g (0.49 oz)
Soldering temperature max. 260°C / 10 sec
Pin-Out
Pin Single Dual
1+Vin (Vcc) +Vin (Vcc)
2No function –Vout 2
3 No function +Vout 2
10 –Vout –Vout 1
11 +Vou t +Vout 1
12 –Vin (GND) –Vin (GND)
13 –Vin (GND) –Vin (GND)
14 +Vou t +Vout 1
15 –Vout –Vout 1
22 No function +Vout 2
23 No function –Vout 2
24 +Vin (Vcc) +Vin (Vcc)
Pin ø 0.5 (0.02)
Tolerances ±0.5 (0.01)
27.94 (1.1)
2.54
32 ±0.5
(1.25
±
0.02)
10
±0.5
5
15.24
(0.6)
10
11
12
22
24
23 1
2
3
15
14
13
Bottom view
2.54 17.78 (0.7)
0.5
(0.02)
(0.4 ±0.02)
(0.2)
(0.1)
(0.1)
2.54
(0.1)
2.54
(0.1)
2.54
(0.1)
2.54
(0.1)
2.0 ±0.5
(0.08
±
0.02)
2.4
±0.5
(0.1
±
0.02)
20
±0.5 (0.8 ±0.02)
