https://www.phoenixcontact.com/us/products/1730715
11/23/2020Page5/8
Printed-circuit board connector-FKC 2,5/ 2-STF-5,08 BK-1730715
Technical data
Mechanical tests according to standard
Contact holder in insert IEC 60512-15-1:2008-05
Test force per pos. 26 N
Air clearances and creepage distances
Clearances and creepage distances IEC 60664-1:2007-04
Specification IEC 60664-1:2007-04
Minimum clearance - inhomogeneous field (III/3) 3 mm
Minimum clearance - inhomogeneous field (III/2) 3 mm
Minimum clearance - inhomogeneous field (II/2) 3 mm
Minimum creepage distance value (III/3) 4 mm
Minimum creepage distance value (III/2) 3 mm
Minimum creepage distance value (II/2) 3.2 mm
Current carrying capacity / derating curves
Caption Type: FKC 2,5/..-STF-5,08 with IC 2,5/..-STGF-5,08
Mechanical tests (A)
Test specification IEC 61984
Insertion strength per pos. approx. 8 N
Withdraw strength per pos. approx. 6 N
Polarization when inserted requirement >20 N Test passed
Contact holder in insert requirements >20 N Test passed
Durability tests (B)
Specification IEC 60512-9-1:2010-03
Contact resistance R11.5 mΩ
Insertion/withdrawal cycles 25
Contact resistance R21.6 mΩ
Impulse withstand voltage at sea level 4.8 kV
Thermal tests (C)
Specification IEC 60512-5-1:2002-02
Number of positions 20
Upper limiting temperature requirements <100 °C Test passed
Climatic tests (D)
Specification ISO 6988:1985-02
Cold stress -40 °C/2 h
Thermal stress 100 °C/168 h
Corrosive stress 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle