51
Revised: June 3, 2012
POLY-FUSE® Resettable PTCs
© 2012 Littelfuse, Inc
2920L Series
Surface Mount > 2920L Series
2920L Series
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/2920L.html for current information.
2920L Series
The 2920L Series PTC provides surface mount overcurrent
protection for medium voltage (≤60V) applications where
resettable protection is desired.
Electrical Characteristics
Part Number Marking I hold
(A)
I trip
(A)
V max
(Vdc)
I max
(A)
P d
typ.
(W)
Maximum Time
To Trip Resistance Agency
Approvals
Current
(A)
Time
(Sec.)
R min
(Ω)
R typ
(Ω)
R 1max
(Ω)
2920L030 LF030 0.30 0.60 60 10 1.50 1.50 3.00 1.200 3.000 4.800 XX
2920L050 LF050 0.50 1.00 60 10 1.50 2.50 4.00 0.350 0.870 1.400 XX
2920L075 LF075 0.75 1.50 30 40 1.50 8.00 0.30 0.350 0.670 1.000 XX
2920L075/60 LF075-60 0.75 1.50 60 10 1.50 8.00 0.30 0.300 0.60 0.950 XX
2920L100 LF100 1.10 2.20 33 40 1.50 8.00 0.50 0.120 0.270 0.410 XX
2920L125 LF125 1.25 2.50 15 40 1.50 8.00 2.00 0.070 0.160 0.250 XX
2920L150 LF150 1.50 3.00 33 40 1.50 8.00 2.00 0.080 0.150 0.230 XX
2920L185 LF185 1.85 3.70 33 40 1.50 8.00 2.50 0.050 0.110 0.150 XX
2920L200 LF200 2.00 4.00 15 40 1.50 8.00 5.00 0.050 0.090 0.125 XX
2920L200/24 LF200-24 2.00 4.00 24 40 1.50 8.00 5.00 0.050 0.090 0.125 XX
2920L250 LF250 2.50 5.00 15 40 1.50 8.00 10.00 0.035 0.060 0.085 XX
2920L260 LF260 2.60 5.00 6 40 1.50 8.00 10.00 0.025 0.050 0.075 XX
2920L300 LF300 3.00 5.00 6 40 1.50 8.00 20.00 0.015 0.033 0.048 XX
2920L300/15 LF300-15 3.00 5.00 15 40 1.50 8.00 20.00 0.015 0.033 0.048 XX
Description
I hold = Hold current: maximum current device will pass without tripping in 20°C still air.
I trip = Trip current: minimum current at which the device will trip in 20°C still air.
V max = Maximum voltage device can withstand without damage at rated current (I max)
I max = Maximum fault current device can withstand without damage at rated voltage (Vmax)
P d = Power dissipated from device when in the tripped state at 20°C still air.
R min = Minimum resistance of device in initial (un-soldered) state.
R typ = Typical resistance of device in initial (un-soldered) state.
R 1max = Maximum resistance of device at 20°C measured one hour after tripping or reflow soldering of 260°C for 20 sec.
Caution: Operation beyond the specified rating may result in damage and possible arcing and flame.
Agency Approvals
AGENCY AGENCY FILE NUMBER
E183209
R50119118
Features
Applications
t3P)4DPNQMJBOUMFBEGSFF
and halogen-free
t'BTUSFTQPOTFUPGBVMU
currents
t)JHIWPMUBHF
t-PXQSPmMF
t*&&QPSUQSPUFDUJPO
t1PXFSFEFUIFSOFUQPSU
QSPUFDUJPO*&&&BG
t"VUPNPUJWFFMFDUSPOJD
control module protection
t-PXWPMUBHFUFMFDPN
equipment protection