Aluminum Electrolytic Capacitors/ GA(Bi-polar) Radial Lead Type Series: GA(Bi-polar) Type: A Features Endurance : 105 C 1000 h to 2000 h RoHS directive compliant Specifications Category Temp. Range -40 C to +105 C Rated W.V. Range 6.3 V.DC to 50 V.DC Nominal Cap. Range 0.47 F to 330 F Capacitance Tolerance 20 % (120 Hz/+20 C) I < 0.03 CV +3 (A) After 2 minutes or I < 0.03 CV or 3 (A) After 5 minutes (Whichever is greater) DC Leakage Current tan Please see the attached standard products list After following life test of DC working voltage at +105 C2 C when the capacitors are restored to 20 C, the capacitors shall meet the following limits. Duration 5 to 8 : 1000 hours (500 hours for each polarity) : 2000 hours (1000 hours for each polarity) 10 Endurance Capacitance change 20% of initial measured value tan < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 120 1k 10 k to 0.70 1.00 1.30 1.70 Dimensions in mm (not to scale) [mm] 5 to 8 d0.05 Pressure relief 6.3< L 14 min. D0.5 3 min. 10< F0.5 Sleeve D0.5 L<16 : L1.0 L>20 : L2.0 (mm) Body Dia. D 5 6.3 Lead Dia. d 0.5 Lead space F 2.0 8 10 0.5 0.6 0.6 2.5 3.5 5.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - EE121 - 01 Jun. 2011 Aluminum Electrolytic Capacitors/ GA(Bi-polar) Standard Products (Bi-polar) Case size W.V. (V) 6.3 10 16 25 35 50 Cap. (20 %) Dia. Specification Ripple tan Current Length (120 Hz) (120 Hz) (+105 C) (+20 C) (mm) (mA r.m.s.) Lead Length Lead Dia. Min. Packaging Q'ty Lead Space Straight Taping Taping B i Part No. Straight Taping Leads (F) (mm) 100 6.3 11.2 130 0.30 330 8 11.5 250 47 5 11 90 10 5 11 40 0.20 0.5 2.0 5.0 2.5 ECA1CEN100( ) 200 2000 22 5 11 60 0.20 0.5 2.0 5.0 2.5 ECA1CEN220( ) 200 2000 80 0.20 0.5 2.0 5.0 2.5 ECA1CEN330( ) 200 2000 100 0.20 0.5 2.5 5.0 2.5 ECA1CEN470( ) 200 2000 33 5 11 47 6.3 11.2 (mm) (mm) (mm) (mm) (pcs) (pcs) 0.5 2.5 5.0 2.5 ECA0JEN101( ) 200 2000 0.30 0.6 3.5 5.0 ECA0JEN331( ) 200 1000 0.24 0.5 2.0 5.0 2.5 ECA1AEN470( ) 200 2000 10 5 11 45 0.15 0.5 2.0 5.0 2.5 ECA1EEN100( ) 200 2000 22 6.3 11.2 60 0.15 0.5 2.5 5.0 2.5 ECA1EEN220( ) 200 2000 33 6.3 11.2 90 0.15 0.5 2.5 5.0 2.5 ECA1EEN330( ) 200 2000 47 6.3 11.2 110 0.15 0.5 2.5 5.0 2.5 ECA1EEN470( ) 200 2000 100 8 11.5 180 0.15 0.6 3.5 5.0 ECA1EEN101( ) 200 1000 33 8 11.5 100 0.15 0.6 3.5 5.0 ECA1VEN330( ) 200 1000 100 10 16 230 0.15 0.6 5.0 5.0 ECA1VEN101( ) 200 500 0.47 5 11 10 0.15 0.5 2.0 5.0 2.5 ECA1HENR47( ) 200 2000 1 5 11 10 0.15 0.5 2.0 5.0 2.5 ECA1HEN010( ) 200 2000 2.2 5 11 18 0.15 0.5 2.0 5.0 2.5 ECA1HEN2R2( ) 200 2000 3.3 5 11 25 0.15 0.5 2.0 5.0 2.5 ECA1HEN3R3( ) 200 2000 4.7 5 11 30 0.15 0.5 2.0 5.0 2.5 ECA1HEN4R7( ) 200 2000 10 6.3 11.2 50 0.15 0.5 2.5 5.0 2.5 ECA1HEN100( ) 200 2000 22 8 11.5 90 0.15 0.6 3.5 5.0 ECA1HEN220( ) 200 1000 33 8 11.5 110 0.15 0.6 3.5 5.0 ECA1HEN330( ) 200 1000 47 10 12.5 140 0.15 0.6 5.0 5.0 ECA1HEN470( ) 200 500 100 10 20 250 0.15 0.6 5.0 5.0 ECA1HEN101( ) 200 500 Endurance : 105 C 5 to 8=1000 h (500 h for each polarity), 10=2000 h (1000 h for each polarity) When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, i=2.5 mm. The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - EE122 - 00 Sep. 2010