Max. 44 m /h DC axial fans 3 70 x 15 mm Housing: GRP1) (PBT) Impeller: GRP1) (PA) Direction of air flow: Exhaust over struts Direction of rotation: Counterclockwise, looking towards rotor Connection: Via single wires AWG 24 to AWG 28, TR 64 Weight: 53 g - Material: - - - - - Possible special versions: (See chapter DC fans - specials) - Speed signal - Go / NoGo alarm - Moisture protection -20...+70 60 000 / 30 000 102 500 4 300 -20...+70 60 000 / 30 000 102 500 1.7 5 300 -20...+70 60 000 / 30 000 102 500 1.5 5 300 -20...+70 60 000 / 30 000 102 500 VDC 712 F/2L-005* 28 16.5 12 8...13.8 25 4.7 0.6 712 F/2M-006* 36 21.2 12 8...13.8 32 5.0 1.1 712 F 44 25.9 12 8...13.8 38 5.3 714 F 44 25.9 24 18...28 5.3 38 Subject to change *Version with 3-pin Molex plug housing Molex Contacts 22-01-2035 08-50-0113 2016-01 Air performance measured according to: ISO 5801. Installation category A, without contact protection. Noise: Total sound power level LWA ISO 103002 measured on a hemisphere with a radius of 2 m. Sound pressure level LpA measured at 1 m distance from fan axis. The values given are applicable only under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard configuration, the parameters must be checked after installation! For detailed information see http://www.ebmpapst.com/general conditions 42 Finger guards from p. 242 Tin-p la ted Curve 3 300 VDC dB(A) Bel(A) Life expectancy L10IPC (40 C) see page 17 Hours cfm Type Service life L10 (Tmax) ebm-papst standard Hours m3/h Nominal data Service life L10 (40 C) ebm-papst standard Temperature range Power consumption C Voltage range rpm-1 Nominal voltage Nominal speed Sintec sleeve bearings Ball bearings Watts Air flow Sound power level / Air flow Series 700 F Sound pressure level 1) Fiberglass-reinforced plastic