42
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Moisture protection
Max. 44 m3/h
Type m3/h cfm VDC VDC dB(A) Bel(A) / Watts rpm-1 °C Hours Hours
712 F/2L-005* 28 16.5 12 8...13.8 25 4.7 0.6 3 300 -20...+70 60 000 / 30 000 102 500 ¿
712 F/2M-006* 36 21.2 12 8...13.8 32 5.0 1.1 4 300 -20...+70 60 000 / 30 000 102 500 ¡
712 F 44 25.9 12 8...13.8 38 5.3 1.7 5 300 -20...+70 60 000 / 30 000 102 500 ¬
714 F 44 25.9 24 18...28 38 5.3 1.5 5 300 -20...+70 60 000 / 30 000 102 500 ¬
Subject to change
Nominal voltage
Air flow
Air flow
Voltage range
Sound pressure level
Sound power level
Sintec sleeve bearings
Ball bearings
Power consumption
Nominal speed
Temperature range
Service life L10 (40 °C)
ebm-papst standard
Service life L10 (Tmax)
ebm-papst standard
Life expectancy L10IPC
(40 °C) see page 17
Curve
– Material: Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
– Direction of air flow: Exhaust over struts
– Direction of rotation: Counterclockwise,
looking towards rotor
– Connection: Via single wires AWG 24 to
AWG 28, TR 64
– Weight: 53 g
1) Fiberglass-reinforced plastic
*Version with 3-pin Molex plug housing 22-01-2035
Molex Contacts 08-50-0113
Tin-plated
Finger guards
from p. 242
DC axial fans
70 x 15 mm
Series 700 F
Nominal data
