A B C D E F H G 1 2 pos pin (x4) 2 2 5 . 4 4 3.4 10.76 screw 6.8 4 3 X Bottom view Scale: 2:1 45 3 Oval beam pattern direction c/c 21.51 21.52 5.3 Height(Lens table) c/c Symmetric beam pattern direction Lens position pin (x2) Lens table 1.4 Holder posiotion pin (x2) ASSEMBLY CODE Section view A-A Scale: 1:1 35 2 3 7.4 13.6 Front view Scale: 1:1 Y Z Height Lens CA16202_GABRIELLA-MIDI-S C16193_GABRIELLA-MIDI-S CA16203_GABRIELLA-MIDI-M C16194_GABRIELLA-MIDI-M 24.08mm 24.08mm CA16204_GABRIELLA-MIDI-W C16195_GABRIELLA-MIDI-W CA16205_GABRIELLA-MIDI-O C16196_GABRIELLA-MIDI-O 24.17mm 24.29mm 2 ASSEMBLY COMPONENTS . 37 10 Top view Scale: 1:1 8 INDEX PRODUCT 1 GABRIELLA-MIDI-Lens (See assembly table) 2 C16192_GABRIELLA-MIDI-HLD 3 C16306_GABRIELLA-MIDI-TAPE TYPE MATERIAL COLOUR/COATING LENS PMMA CLEAR HOLDER PC BLACK TAPE PU BLACK MECHANICAL DRAWING A A PRODUCT GABRIELLA-MIDI 1 Notes PCB or Heat Sink level Led location see marking. Ensure LED fitting, see our web site and/or 3D model for part detail. See more information on page 2,3,4 Optional parts can be shown in drawing. Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L SCALE H G 1:1 FIRST ANGLE PROJECTION: SIZE This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. A3 B 1/4 SHEET A 1 A B C D E F G H 10.76 2 pos pin (x4) 2 x screw 1 2 5 . 4 4 3.4 6.8 2 45 3 c/c 21.51 5.3 1.4 Symmetric beam pattern direction Lens position pin (x2) Lens table Holder posiotion pin (x2) ASSEMBLY CODE 35 Section view A-A Scale: 1:1 37 10 Top view Scale: 1:1 .8 3 7.4 21.52 c/c Height(Lens table) Y Z 13.6 2 X Oval beam pattern direction Bottom view Scale: 2:1 Front view Scale: 1:1 4 Height Lens CN16208_GABRIELLA-MIDI-S C16193_GABRIELLA-MIDI-S CN16209_GABRIELLA-MIDI-M C16194_GABRIELLA-MIDI-M 24.08mm 24.08mm CN16210_GABRIELLA-MIDI-W C16195_GABRIELLA-MIDI-W CN16211_GABRIELLA-MIDI-O C16196_GABRIELLA-MIDI-O 24.17mm 24.29mm 2 ASSEMBLY COMPONENTS INDEX PRODUCT 1 GABRIELLA-MIDI-Lens (See lens table) 2 C16192_GABRIELLA-MIDI-HLD TYPE MATERIAL COLOUR/COATING LENS PMMA CLEAR HOLDER PC BLACK MECHANICAL DRAWING A A PRODUCT GABRIELLA-MIDI 1 Notes PCB or Heat Sink level Led location see marking. Ensure LED fitting, see our web site and/or 3D model for part detail. Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L SCALE H G 1:1 FIRST ANGLE PROJECTION: SIZE This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. A3 B 3/4 SHEET A 1 A B C D E F G H 2 4 4 Bottom view Scale: 1:1 Isometric view Scale: 1:1 21.51 7.4 3 5.3 1.4 Section view E-E Scale: 1:1 10 35 Front view Scale: 1:1 c/c Height(Lens table) 3 13.6 37.5 Top view Scale: 1:1 Lens table 2 E E Lens Height C16193_GABRIELLA-MIDI-S C16194_GABRIELLA-MIDI-M 24.08mm 24.08mm C16195_GABRIELLA-MIDI-W C16196_GABRIELLA-MIDI-O 24.17mm 24.29mm 2 COMPONENTS INDEX 1 PRODUCT GABRIELLA-MIDI-Lens (See assembly table) TYPE MATERIAL COLOUR/COATING LENS PMMA CLEAR MECHANICAL DRAWING PRODUCT GABRIELLA-MIDI 1 Notes PCB or Heat Sink level Led location see marking. Ensure LED fitting, see our web site and/or 3D model for part detail. Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L SCALE H G 1:1 FIRST ANGLE PROJECTION: SIZE This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. A3 B 2/4 SHEET A 1 A B C D E F G H 4 4 1. Place holder on PCB using the holder location pins as guide elements. Holder is fixed either by with on-board PU-tape or M3 screw with max 0.6Nm torgue. 2. Place lens support features into relative holes in the holder, please note that the location pins on the lens goes through the PCB. 3 3 3.Press optic until 4 clips each locked. Clip (x4) 2 2 Lens support (x2) MECHANICAL DRAWING PRODUCT GABRIELLA-MIDI 1 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L SCALE H G 1:1 FIRST ANGLE PROJECTION: SIZE This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. A3 B 4/4 SHEET A 1