1.5SMC Series www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB(R) Transient Voltage Suppressors FEATURES * Low profile package * Ideal for automated placement * Glass passivated chip junction * Available in uni-directional and bi-directional * 1500 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle): 0.01 % * Excellent clamping capability * Very fast response time * Low incremental surge resistance DO-214AB (SMC) * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C * AEC-Q101 qualified * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS VWM 5.8 V to 459 V VBR (uni-directional) 6.8 V to 540 V VBR (bi-directional) 6.8 V to 220 V PPPM 1500 W PD 6.5 W TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. IFSM (uni-directional only) 200 A TJ max. 150 C Polarity Uni-directional, bi-directional Package DO-214AB (SMC) MECHANICAL DATA DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional 1.5SMC220CA). devices use CA suffix (e.g. Electrical characteristics apply in both directions. Case: DO-214AB (SMC) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant and commercial grade Base P/NHE3 - RoHS compliant and AEC-Q101 qualified Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified ("_X" denotes revision code e.g. A, B, .....) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: For uni-directional types the band denotes cathode end, no marking on bi-directional types MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER Peak power dissipation with a 10/1000 s waveform Peak pulse current with a 10/1000 s waveform (1) (1)(2) (fig. 1) (fig. 3) Power dissipation on infinite heatsink at TA = 50 C Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) Operating junction and storage temperature range SYMBOL VALUE UNIT PPPM 1500 W IPPM See next table A PD 6.5 W IFSM 200 A TJ, TSTG - 65 to + 150 C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2. A (2) Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal Revision: 14-Dec-12 Document Number: 88303 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1.5SMC Series www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) DEVICE MARKING CODE PART NUMBER UNI BI BREAKDOWN STAND-OFF VOLTAGE TEST VBR AT IT (1) CURRENT VOLTAGE VWM (V) IT (V) (mA) MIN. MAX. 1.5SMC6.8A 6V8A 6V8C 6.45 7.14 10 5.80 1.5SMC7.5A 7V5A 7V5C 7.13 7.88 10 6.40 1.5SMC8.2A 8V2A 8V2C 7.79 8.61 10 7.02 1.5SMC9.1A 9V1A 9V1C 8.65 9.55 1.0 7.78 1.5SMC10A 10A 10C 9.50 10.5 1.0 8.55 1.5SMC11A 11A 11C 10.5 11.6 1.0 9.40 1.5SMC12A 12A 12C 11.4 12.6 1.0 10.2 1.5SMC13A 13A 13C 12.4 13.7 1.0 11.1 1.5SMC15A 15A 15C 14.3 15.8 1.0 12.8 1.5SMC16A 16A 16C 15.2 16.8 1.0 13.6 1.5SMC18A 18A 18C 17.1 18.9 1.0 15.3 1.5SMC20A 20A 20C 19.0 21.0 1.0 17.1 1.5SMC22A 22A 22C 20.9 23.1 1.0 18.8 1.5SMC24A 24A 24C 22.8 25.2 1.0 20.5 1.5SMC27A 27A 27C 25.7 28.4 1.0 23.1 1.5SMC30A 30A 30C 28.5 31.5 1.0 25.6 1.5SMC33A 33A 33C 31.4 34.7 1.0 28.2 1.5SMC36A 36A 36C 34.2 37.8 1.0 30.8 1.5SMC39A 39A 39C 37.1 41.0 1.0 33.3 1.5SMC43A 43A 43C 40.9 45.2 1.0 36.8 1.5SMC47A 47A 47C 44.7 49.4 1.0 40.2 1.5SMC51A 51A 51C 48.5 53.6 1.0 43.6 1.5SMC56A 56A 56C 53.2 58.8 1.0 47.8 1.5SMC62A 62A 62C 58.9 65.1 1.0 53.0 1.5SMC68A 68A 68C 64.6 71.4 1.0 58.1 1.5SMC75A 75A 75C 71.3 78.8 1.0 64.1 1.5SMC82A 82A 82C 77.9 86.1 1.0 70.1 1.5SMC91A 91A 91C 86.5 95.5 1.0 77.8 1.5SMC100A 100A 100C 95.0 105 1.0 85.5 1.5SMC110A 110A 110C 105 116 1.0 94.0 1.5SMC120A 120A 120C 114 126 1.0 102 1.5SMC130A 130A 130C 124 137 1.0 111 1.5SMC150A 150A 150C 143 158 1.0 128 1.5SMC160A 160A 160C 152 168 1.0 136 1.5SMC170A 170A 170C 162 179 1.0 145 1.5SMC180A 180A 180C 171 189 1.0 154 1.5SMC200A 200A 200C 190 210 1.0 171 1.5SMC220A 220A 220C 209 231 1.0 185 1.5SMC250A 250A 237 263 1.0 214 1.5SMC300A 300A 285 315 1.0 256 1.5SMC350A 350A 333 368 1.0 300 1.5SMC400A 400A 380 420 1.0 342 1.5SMC440A 440A 418 462 1.0 376 1.5SMC480A 480A 456 504 1.0 408 1.5SMC510A 510A 485 535 1.0 434 1.5SMC540A 540A 513 567 1.0 459 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE CA62.35 (4) For bi-directional types with V of 10 V and less, the I limit is doubled R D (5) V = 3.5 V at I = 100 A (uni-directional only) F F Revision: 14-Dec-12 MAXIMUM REVERSE LEAKAGE AT VWM ID (4) (A) 1000 500 200 50 10 5.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 MAXIMUM PEAK PULSE CURRENT IPPM (2) (A) 143 133 124 112 103 96.2 89.8 82.4 70.8 66.7 59.5 54.2 49.0 45.2 40.0 36.2 32.8 30.1 27.8 25.3 23.1 21.4 19.5 17.6 16.3 14.6 13.3 12.0 10.9 9.9 9.1 8.4 7.2 6.8 6.4 6.1 5.5 4.6 4.4 3.6 3.1 2.7 2.5 2.28 2.15 2.03 MAXIMUM MAXIMUM CLAMPING TEMPERATURE COEFFICIENT VOLTAGE OF VBR AT IPPM VC (V) (%/C) 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 104 113 125 137 152 165 179 207 219 234 246 274 328 344 414 482 548 602 658 698 740 0.057 0.061 0.065 0.068 0.073 0.075 0.078 0.081 0.084 0.086 0.089 0.090 0.092 0.090 0.096 0.097 0.098 0.099 0.100 0.101 0.101 0.102 0.103 0.104 0.104 0.105 0.105 0.106 0.106 0.107 0.107 0.107 0.106 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 Document Number: 88303 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1.5SMC Series www.vishay.com Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL VALUE Typical thermal resistance, junction to ambient air (1) RJA 75 Typical thermal resistance, junction to leads RJL 15 UNIT C/ W Note (1) Mounted on minimum recommended pad layout ORDERING INFORMATION (Example) UNIT WEIGHT (g) PREFERRED P/N 1.5SMC6.8A-E3/57T 0.211 VOLTAGE RANGE (V) UNI - BI - PACKAGE CODE BASE QUANTITY DELIVERY MODE 6.8 to 540 6.8 to 220 57T 850 7" diameter plastic tape and reel 1.5SMC6.8A-E3/9AT 0.211 6.8 to 540 6.8 to 220 9AT 3500 13" diameter plastic tape and reel 1.5SMC6.8AHE3/57T (1) 0.211 6.8 to 540 6.8 to 220 57T 850 7" diameter plastic tape and reel (1) 0.211 6.8 to 540 6.8 to 220 9AT 3500 13" diameter plastic tape and reel 0.211 250 to 540 - H 850 7" diameter plastic tape and reel 0.211 250 to 540 - I 3500 13" diameter plastic tape and reel 1.5SMC6.8AHE3/9AT 1.5SMC250AHE3_A/H (1) 1.5SMC250AHE3_A/I (1) Note AEC-Q101 qualified (1) RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % PPPM - Peak Pulse Power (kW) 100 10 1 0.31 x 0.31" (8.0 x 8.0 mm) Copper Pad Areas 0.1 0.1 s 1.0 s 10 s 100 s 1.0 ms 10 ms 100 75 50 25 0 0 25 50 75 100 125 150 175 200 td - Pulse Width (s) TJ - Initial Temperature (C) Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Revision: 14-Dec-12 Document Number: 88303 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1.5SMC Series www.vishay.com tr = 10 s Peak Value IPPM 100 200 TJ = 25 C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM Peak Forward Surge Current (A) IPPM - Peak Pulse Current, % IRSM 150 Vishay General Semiconductor Half Value - IPP IPPM 2 50 10/1000 s Waveform as defined by R.E.A. 100 TJ = TJ max. 8.3 ms Single Half Sine-Wave td 0 10 1.0 0 3.0 2.0 4.0 1 10 100 t - Time (ms) Number of Cycles at 60 Hz Fig. 3 - Pulse Waveform Fig. 6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Use Only 20 000 Measured at Zero Bias CJ - Junction Capacitance (pF) 10 000 1000 VR, Measured at Stand-Off Voltage VWM 100 Uni-Directional Bi-Directional TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 10 1 10 100 400 VWM - Reverse Stand-Off Voltage (V) Fig. 4 - Typical Junction Capacitance Uni-Directional Transient Thermal Impedance (C/W) 100 10 1.0 0.1 0.001 0.01 0.1 1 10 100 1000 tp - Pulse Duration (s) Fig. 5 - Typical Transient Thermal Impedance Revision: 14-Dec-12 Document Number: 88303 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1.5SMC Series www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AB (SMC) Mounting Pad Layout Cathode Band 0.185 (4.69) MAX. 0.126 (3.20) 0.246 (6.22) 0.220 (5.59) 0.114 (2.90) 0.126 (3.20) MIN. 0.280 (7.11) 0.060 (1.52) MIN. 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.320 REF. 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.320 (8.13) 0.305 (7.75) Revision: 14-Dec-12 Document Number: 88303 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000