75
Surface-mount Fuses Fundamentals
11
Surface-mount Fuses
Fundamentals
Overview
TE Circuit Protection offers the widest selection of surface-mount
fuses available for addressing a broad range of overcurrent
protection applications. Helping to prevent costly damage and
promote a safe environment for electronic and electrical
equipment, our single-use chip fuses provide performance stability
to support applications with current ratings from .5A up to 20A.
TE Circuit Protection also offers the telecom FT600 fuse for
telecommunications applications. This telecom fuse helps comply
with North American overcurrent protection requirements,
including Telcordia, GR-1089, TIA-968-A (formerly FCC Part 68),
and UL60950 3rd edition.
Multi-layer Design for Chip Fuses
The multi-layer design has the benefit of exposing more fuse
element surface area to the glass-ceramic absorption material.
When the fuse elements open, there is more material for the
vaporizing fuse metals to absorb into, resulting in a very efficient
and effective quenching of the fuse arc.
Figure 1 compared the multi-layer design of our SFF fuses with
standard glass coated designs. The glass coated designs rely on
the coating on only one side of the fuse element to absorb the
vaporizing fuse material when it opens. Therefore, there is much
less absorption material available to absorb the fuse metals. The
result can be prolonged arcing and possible coating breach.
Figure 2 shows how the absorption characteristics of the two
designs differ. The multi-layer design indicates a clean separation
with the fuse element evenly diffusing into the surrounding
ceramic substrate. In the glass coated design, the element
diffusion takes place in a small portion of the device and is only
absorbed by the glass material directly above the area of failure.
Glass/Ceramic
Substrate
Multiple Fuse
Elements
Substrate
Material
Single Fuse
Element
Single-layer Glass Coated DesignMulti-layer Design
Glass
Coating
Figure 1
Figure 2
Fault Zones
Multi-layer Design Single-layer Glass Coated Design
Wire-In-Air Design for 2410SFV Fuses
The 2410(6125) is a Wire-In-Air SMD Fuse which is very suitable
for secondary level over current protection applications.
Figure 3 compared our straight wire element design 2410SFV
fuses with normal corrugating wire design fuse. The straight wire
element in air performs consistent fusing and cutting
characteristics together with excellent inrush current
withstanding capability.
Introduced PCB assembly technology into 2410SFV fuses design
and manufacture, we achieved on lead free completely and no
end cap falling off risk comparing with traditional ceramic body
with end cap fuse.
Glass fiber enforced
epoxy body
Ceramic body
Corrugate wire element
End cap plated with Tin
Straight wire element
Copper terminal
plated with Ni and Tin
Figure 3
76
11
Pulse Cycle Derating
Once the I2t value for the application waveform has been
determined, it must be derated based on the number of cycles
expected over the system lifetime. Since the stress induced by the
current pulse is mechanical in nature, the number of times the
stress is applied has significant bearing on how much derating
must be applied to the fuse rating. Figure 5 presents the current
pulse derating curve for our surface-mount chip fuses up to
100,000 cycles.
Fuse Selection Flowchart
However, the basic considerations for fuse selection are shown in the flowchart presented in Figure 6. Following this flow chart
will help you select a fuse best suited for your application conditions.
Surface-mount Fuse Pulse Derating Curve
100 1000 10000 100000
100%
10%
Number of Pulses
% of Minimum I2t
Figure 5
Step 1
Determine Steady State
Fuse Current Rating
Step 2
Determine Pulse
Waveform by
Calculating I2t
Step 3
Apply Pulse
Cycle Derating
Step 4
Apply Pulse
Temperature
Derating
Step 5
Apply Derating
for Variance in
the Circuit
Step 6
Select Fuse Current
Rating for Pulse
Environment
Step 7 Select Fuse Current Rating
(use higher value between Step 1 and Step 6) Step 8 Check Voltage Rating
Apply Standard Steady
State Derating (75%)
[Ifuse Isys/0.75]
Apply
Temperature Derating
[Ifuse Isys/0.75/Ktemp]
Steady State
Fuse Current
Rating
Figure 6
Selecting Surface-mount Fuses
Fuse selection seems straightforward, in that, you pick one which has a current rating just a bit higher than your worstcase system
operating current. Unfortunately, it’s not that simple. There are derating considerations for operating current and application
temperature. Turn-on and other system operations (like processor speed changes or motor start up) cause current surges or
spikes that also require consideration when selecting a fuse. So selecting the right fuse for your application is not as simple as
knowing the nominal current drawn by the system.
Temperature Derating
A fuse is a temperature sensitive device. Therefore, operating temperature will have an effect on fuse performance and lifetime.
Operating temperature should be taken into consideration when selecting the fuse current rating. The Thermal Derating Curve for
surface mount fuses is presented in Figure 4. Use it to determine the derating percentage based on operating temperature and
apply it to the derated system current.
1206/0603/0402 Series
Temperature Effect on Current Rating
2410 Series
Temperature Effect On Current Rating
-55 -55 -35 -15 5 25 45 65 85 105 125-35 -15 5 25 45 65 85 105 145125
105
100
95
90
85
80
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
110
105
100
95
90
85
80
75
70
65
60
55
50
Maximum Operating Temperature (°C) Maximum Operating Temperature (°C)
% De-rating
% De-rating
Figure 4
77
Surface-mount Fuses Pulse Tolerant Chip Fuses
11
Pulse Tolerant chip fuses has high inrush current
withstand capability and provide overcurrent protection
on DC power systems. Silver fusing element, monolithic
and multilayer design provides strong arc suppression
characteristics.
These RoHS-compliant surface-mount devices facilitate
the development of more reliable, high performance
consumer electronics such as laptops, multimedia
devices, cell phones, and other portable electronics.
High inrush current withstanding capability
Ceramic Monolithic structure
Silver fusing element and silver termination with
nickel and tin plating
Excellent temperature stability
Strong arc suppression characteristics
Lead free materials and RoHS compliant
Halogen free
(refers to: Br900ppm, Cl900ppm, Br+Cl1500ppm)
Monolithic, multilayer design
High-temperature performance
-55°C to +125°C operating temperature range
Laptops
Digital cameras
Cell phones
Benefits Features
Applications
Printers
DVD players
Portable electronics
Game systems
LCD monitors
Scanners
Surface-mount Fuses
Pulse Tolerant Chip Fuses
NEW
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
W
W
W
W
W
W
W
W
W
W
W
W
NEW
78 RoHS Compliant, ELV Compliant HF Halogen Free
11
% of rated current Clear time at 25°C
100% 4 hours (min.)
200% 1 seconds (min.) 60 seconds (max.)
1000% 0.0002 second (min.) 0.02 seconds (max.)
0603SFP100F/32-2 1.0 0.210 0.080 32 50
0603SFP150F/32-2 1.5 0.101 0.11 32 50
0603SFP200F/32-2 2.0 0.057 0.24 32 50
0603SFP250F/32-2 2.5 0.042 0.56 32 50
0603SFP300F/32-2 3.0 0.030 0.72 32 50
0603SFP350F/32-2 3.5 0.022 1.10 32 50
0603SFP400F/32-2 4.0 0.018 2.08 32 50
0603SFP450F/32-2 4.5 0.014 2.63 32 50
0603SFP500F/32-2 5.0 0.013 3.25 32 50
1206SFP100F/63-2 1.0 0.340 0.11 63 50
1206SFP150F/63-2 1.5 0.150 0.33 63 50
1206SFP200F/63-2 2.0 0.090 0.80 63 50
1206SFP250F/32-2 2.5 0.070 1.19 32 50
1206SFP300F/32-2 3.0 0.035 1.35 32 50
1206SFP350F/32-2 3.5 0.029 1.84 32 50
1206SFP400F/32-2 4.0 0.023 2.74 32 50
1206SFP450F/32-2 4.5 0.021 3.20 32 50
1206SFP500F/32-2 5.0 0.017 5.50 32 50
* Measured at 10% of rated current and 25°C ambient temperature.
Melting I2t at 0.001 sec clear time.
0603 (1608 mm) Pulse Tolerant Chip Fuses
1206 (3216 mm) Pulse Tolerant Chip Fuses
A
B
C
D
Shape and Dimensions
mm (Inch)
Table FP1 Clear Time Characteristics for Pulse Tolerant Chip Fuses
Table FP2 Typical Electrical Characteristics and Dimensions for Pulse Tolerant Chip Fuses
Part Number
Rated
Current
(A)
Nominal
Cold DCR
()*
Voltage
(VDC)
Current
(A)
Nominal
I2t
(A2sec)
Typical
Electrical Characteristics
Max.
Interrupt Ratings
Part Number
Rated
Current
(A)
Nominal
Cold DCR
()*
Voltage
(VDC)
Current
(A)
Nominal
I2t
(A2sec)
Typical
Electrical Characteristics
Max.
Interrupt Ratings
ABCD
Min Max Min Max Min Max Min Max
mm 1.45 1.75 0.65 0.95 0.21 0.51 0.65 0.95
in (0.057) (0.069) (0.026) (0.037) (0.008) (0.020) (0.026) (0.037)
ABCD
Min Max Min Max Min Max Min Max
mm 3.00 3.40 0.77 1.17 0.26 0.76 1.40 1.80
in (0.118) (0.134) (0.030) (0.046) (0.010) (0.030) (0.055) (0.071)
A
B
C
D
Shape and Dimensions
mm (Inch)
79
Surface-mount Fuses Pulse Tolerant Chip Fuses
RoHS Compliant, ELV Compliant HF Halogen Free
11
Clear Time (s)
100
10
1
0.1
0.01
0.001
0.0001
10 1001
Current (A)
0603SFP Average Time Current Curves
1.0A
1.5A
2.0A
2.5A
3.0A
3.5A
4.0A
4.5A
5.0A
Figure FP1
I
2
t (A
2
s)
10,000
1000
100
10
1
0.1
0.01
0.010.001 10
0.1 1 1000.0001
Time (s)
0603SFP I
2
T vs. t Curves
1.0A
1.5A
2.0A
2.5A
3.0A
3.5A
4.0A
4.5A
5.0A
Figure FP2
Note: Curves are nominal
Figure FP1-FP4 Family Performance Curves for Pulse Tolerant Chip Fuses
80 RoHS Compliant, ELV Compliant HF Halogen Free
11
Clear Time (s)
10,000
100
1
0.01
0.001
10 1001
Current (A)
1206SFP Average Time Current Curves
1.0A
1.5A
2.0A
2.5A
3.0A
3.5A
4.0A
4.5A
5.0A
Figure FP3
I
2
t (A
2
s)
10,000
100
1
0.01
0.01 1 100 10,0000.0001
Time (s)
1206SFP I
2
T vs. t Curves
1.0A
1.5A
2.0A
2.5A
3.0A
3.5A
4.0A
4.5A
5.0A
Figure FP4
Note: Curves are nominal
Please go to page 97 for more information for PulseTolerant Chip Fuses.
Figure FP1-FP4 Family Performance Curves for Pulse Tolerant Chip Fuses
Cont’d
81
Surface-mount Fuses 0603 Very Fast-Acting Chip Fuses
11
Very Fast-acting chip fuses help provide overcurrent
protection on systems using DC power sources up to
32VDC. The fuse’s monolithic, multilayer design provides
the highest hold current in the smallest footprint,
reduces diffusion-related aging, improves product
reliability and resilience, and enhances high-temperature
performance in a wide range of circuit designs.
These RoHS-compliant surface-mount devices offer
strong arc suppression characteristics and facilitate the
development of more reliable, high performance
consumer electronics such as laptops, multimedia
devices, cell phones, and other portable electronics.
Very fast acting at 200% and 300% overloads
Excellent inrush current withstanding capability at
high overloads
Thin body for space limiting applications
Glass ceramic monolithic structure
Silver fusing element and silver termination with
nickel and tin plating
RoHS compliant and lead-free materials
Symmetrical design with marking on both sides
(optional)
Lead free materials and RoHS compliant
Halogen free
(refers to: Br900ppm, Cl900ppm, Br+Cl1500ppm)
Monolithic, multilayer design
High-temperature performance
-55°C to +125°C operating temperature range
Laptops
Digital cameras
Cell phones
Benefits Features
Applications
Printers
DVD players
Portable electronics
Game systems
LCD monitors
Scanners
Surface-mount Fuses
0603 Very Fast-Acting Chip Fuses
NEW
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
W
W
W
W
W
W
W
W
W
W
W
W
NEW
82 RoHS Compliant, ELV Compliant HF Halogen Free
11
% of rated current Clear time at 25°C
100% 4 hours (min.)
200% 0.01 second (min.) 5 seconds (max.)
300% 0.001 second (min.) 0.2 seconds (max.)
0603SFV050F/32-2 0.5 0.860 0.0093 32 50
0603SFV075F/32-2 0.8 0.450 0.0191 32 50
0603SFV100F/32-2 1.0 0.280 0.0360 32 50
0603SFV125F/32-2 1.3 0.205 0.0630 32 35
0603SFV150F/32-2 1.5 0.143 0.0950 32 35
0603SFV175F/32-2 1.8 0.095 0.1400 32 35
0603SFV200F/32-2 2.0 0.073 0.2100 32 35
0603SFV250F/32-2 2.5 0.046 0.3000 32 35
0603SFV300F/32-2 3.0 0.039 0.4600 32 35
0603SFV350F/32-2 3.5 0.028 0.7300 32 35
0603SFV400F/32-2 4.0 0.023 1.1500 32 35
0603SFV450F/32-2 4.5 0.019 1.6800 32 35
0603SFV500F/32-2 5.0 0.015 2.6200 32 35
* Measured at 10% of rated current and 25°C
Part Number
0603 (1608 mm) Very Fast-Acting Chip Fuses
A
B
C
D
Shape and Dimensions
mm (Inch)
Table FV1 Clear Time Characteristics for Very Fast-Acting Chip Fuses
Table FV2 Typical Electrical Characteristics and Dimensions for Very Fast-Acting Chip Fuses
Rated
Current
(A)
Nominal
Cold DCR
()*
Voltage
(VDC)
Current
(A)
Nominal
I2t
(A2sec)
Typical Electrical Characteristics Max. Interrupt Ratings
Please go to page 97 for more information for Very Fast-Acting Chip Fuses.
1 10010
Clear Time (s)
100
10
1
0.1
0.01
0.001
0.0001
Current (A)
0603SFV Average Time Current Curves
0.05A
0.75A
1.00A
1.25A
1.50A
1.75A
2.0 0A
2.50A
3.00A
3.50A
4.00A
4.50A
5.00A
0603SFV I²t vs. t Curves
I²t (A²s)
Time (s)
1000
100
10
1
0.1
0.01
0.001
0.0001
0.0001 0.001 0.10.01 1 10
5.00A
4.50A
4.00A
3.50A
3.00A
2.50A
2.0 0A
1.75A
0.75A
0.05A
1.25A
1.50A
1.00A
Figure FV2Figure FV1
Note: Curves are nominal
Figure FV1-FV2 Family Performance Curves for Very Fast-Acting Chip Fuses
ABCD
Min Max Min Max Min Max Min Max
mm 1.45 1.75 0.22 0.48 0.21 0.51 0.65 0.95
in (0.057) (0.069) (0.009) (0.019) (0.008) (0.020) (0.025) (0.037)
83
Surface-mount Fuses Fast-Acting Chip Fuses
11
Fast-acting chip fuses help provide overcurrent protection
on systems using DC power sources up to 63VDC. The
fuse’s monolithic, multilayer design provides the highest
hold current in the smallest footprint, reduces diffusion-
related aging, improves product reliability and resilience,
and enhances high-temperature performance in a wide
range of circuit designs.
These RoHS-compliant surface-mount devices offer
strong arc suppression characteristics and facilitate the
development of more reliable, high performance
consumer electronics such as laptops, multimedia
devices, cell phones, and other portable electronics.
Small size with high-current ratings
Excellent temperature stability
High reliability and resilience
Strong arc suppression characteristics
Lead free materials and RoHS compliant
Halogen free
(refers to: Br900ppm, Cl900ppm, Br+Cl1500ppm)
Monolithic, multilayer design
High-temperature performance
-55°C to +125°C operating temperature range
Laptops
Digital cameras
Cell phones
Benefits Features
Applications
Printers
DVD players
Portable electronics
Game systems
LCD monitors
Scanners
Surface-mount Fuses
Fast-Acting Chip Fuses
84 RoHS Compliant, ELV Compliant HF Halogen Free
11
% of rated current Clear time at 25°C
100% 4 hours min.
250% 5 seconds max.
400% 0.05 seconds max.
0402SFF050F/24 0.50 0.380 0.0043 24 35
0402SFF075F/24 0.75 0.210 0.0076 24 35
0402SFF100F/24 1.00 0.120 0.0170 24 35
0402SFF150F/24 1.50 0.056 0.0490 24 35
0402SFF200F/24 2.00 0.035 0.0700 24 35
0402SFF300F/24 3.00 0.021 0.1250 24 35
0402SFF400F/24 4.00 0.014 0.2250 24 35
Part Number
0603SFF050F/32 0.50 0.485 0.0029 32 50
0603SFF075F/32 0.75 0.254 0.0064 32 50
0603SFF100F/32 1.00 0.131 0.0160 32 50
0603SFF150F/32 1.50 0.059 0.0300 32 35
0603SFF200F/32 2.00 0.044 0.0600 32 35
0603SFF250F/32 2.50 0.032 0.1150 32 35
0603SFF300F/32 3.00 0.025 0.1900 32 35
0603SFF350F/32 3.50 0.024 0.2950 32 35
0603SFF400F/32 4.00 0.018 0.4000 32 35
0603SFF500F/32 5.00 0.013 0.7000 32 35
0603SFF600F/24 6.00 0.010 1.1250 24 35
1206SFF050F/63 0.50 0.730 0.0021 63 50
1206SFF075F/63 0.75 0.513 0.0052 63 50
1206SFF100F/63 1.00 0.220 0.0120 63 50
1206SFF150F/63 1.50 0.120 0.0250 63 50
1206SFF175F/63 1.75 0.100 0.0450 63 50
1206SFF200F/63 2.00 0.050 0.0700 63 50
1206SFF250F/32 2.50 0.035 0.1400 32 50
1206SFF300F/32 3.00 0.031 0.2200 32 50
1206SFF400F/32 4.00 0.022 0.3800 32 45
1206SFF500F/32 5.00 0.015 0.6000 32 45
1206SFF600F/32 6.00 0.013 1.0000 32 50
1206SFF700F/32 7.00 0.011 1.7500 32 50
1206SFF800F/32 8.00 0.008 2.5000 32 50
1206SFF600F/24 6.00 0.013 1.0000 24 45
1206SFF700F/24 7.00 0.011 1.7500 24 45
1206SFF800F/24 8.00 0.008 2.5000 24 45
* Measured at 10% of rated current and 25°C ambient temperature.
Melting I2t at 0.001 sec clear time.
0402 (1005mm) Fast-Acting Chip Fuses
0603 (1608mm) Fast-Acting Chip Fuses
1206 (3216mm) Fast-Acting Chip Fuses
0.063
(1. 6 0)
0.039±0.004
(1.00±0.10)
0.020±0.004
(0.51±0.10)
0.010±0.004
(0.25±0.10)
0.020±0.004
(0.51±0.10)
S
Shape and
Dimensions
Inch (mm)
Recommended
Pad Layout
Inch (mm)
0.028
(0.70)
0.024
(0.60)
0.016
(0.40)
0
Shape and
Dimensions
Inch (mm)
Recommended
Pad Layout
Inch (mm)
0.031±0.006
(0.80±0.15)
0
0.031±0.006
(0.80±0.15)
0.014±0.006
(0.36±0.15)
0.063±0.006
(1. 6 0±0.15)
0
0.110
(2.80)
0.039
(1.00)
0.043
(1. 0 9)
0.024
(0.60)
0
Shape and
Dimensions
Inch (mm)
Recommended
Pad Layout
Inch (mm)
0.063±0.008
(1. 6 0±0.20) 0.126±0.008
(3.20±0.20)
0.043±0.008
(1. 10±0.20)
0.020±0.010
(0.51±0.25)
0.173
(4.40)
0.071
(1. 8 0)
0.057
(1. 4 5)
0.059
(1. 5 0)
Table FF1 Clear Time Characteristics for Fast-Acting Chip Fuses
Table FF2 Typical Electrical Characteristics, Dimensions and Recommended Pad Layout for
Fast-Acting Chip Fuses
Rated
Current
(A)
Nominal
Cold DCR
()*
Voltage
(VDC)
Current
(A)
Nominal
I2t
(A2sec)
Typical Electrical Characteristics Max. Interrupt Ratings
Part Number
Rated
Current
(A)
Nominal
Cold DCR
()*
Voltage
(VDC)
Current
(A)
Nominal
I2t
(A2sec)
Typical Electrical Characteristics Max. Interrupt Ratings
Part Number
Rated
Current
(A)
Nominal
Cold DCR
()*
Voltage
(VDC)
Current
(A)
Nominal
I2t
(A2sec)
Typical Electrical Characteristics Max. Interrupt Ratings
85
Surface-mount Fuses Fast-Acting Chip Fuses
RoHS Compliant, ELV Compliant HF Halogen Free
11
0.1 101 100
Clear-Time (s)
10
1
0.1
0.01
0.001
Current (A)
0402SFF Average Time Current Curves
0.5A
0.75A
1.0A
1.5A
2.0A
3.0A
4.0A
0.001 0.01 0.1 1 10
1000
100
10
1
0.1
0.01
0.001
I²t (A²s)
Time (s)
0402SFF I²t vs. t Curves
0.5A
0.75A
1.0A
1.5A
2.0A
3.0A
4.0A
Figure FF2Figure FF1
10
1
0.1
0.01
0.001
10.1 10 100
Current (A)
Clear-Time (s)
0603SFF Average Time Current Curves
0.5A
0.75A
1.0A
1.5A
2.0A
2.5A
3.0A
3.5A
4.0A
5.0A
6.0A
0.001 0.01 0.1 1 10
10000
1000
100
10
1
0.1
0.01
0.001
I²t (A²s)
Time (s)
0603SFF I²t vs. t Curves
0.5A
0.75A
1.0A
1.5A
2.0A
2.5A
3.0A
3.5A
4.0A
5.0A
6.0A
Figure FF4Figure FF3
Note: Curves are nominal
Note: Curves are nominal
Figure FF1-FF6 Family Performance Curves for Fast-Acting Chip Fuses
86 RoHS Compliant, ELV Compliant HF Halogen Free
11
0.1 101 100
Clear-Time (s)
10
1
0.1
0.01
0.001
Current (A)
1206SFF Average Time Current Curves
0.5A
0.75A
1.0A
1.5A
1.75A
2.0A
2.5A
3.0A
4.0A
5.0A
6.0A
7.0A
8.0A
I²t (A²s)
10000
1000
100
10
1
0.1
0.01
0.001
Time (s)
1206SFF I²t vs. t Curves
0.001 0.01 0.1 1 10
0.5A
0.75A
1.0A
1.5A
1.75A
2.0A
2.5A
3.0A
4.0A
5.0A
6.0A
7.0A
8.0A
Figure FF6Figure FF5
Note: Curves are nominal
Please go to page 97 for more information for Fast-Acting Chip Fuses.
Figure FF1-FF6 Family Performance Curves for Fast-Acting Chip Fuses
Cont’d
87
High-Current Rated Chip Fuses
11
The monolithic multilayer design of the TE Circuit
Protection high-current-rated chip fuses helps to
provide some of the highest current ratings available in
the 1206 size and enhances high-temperature
performance in a wide range of circuit protection
designs. The devices’ small size, high reliability and
strong arc suppression characteristics make them
suitable for overcurrent protection of power supplies,
servers, communications equipment, voltage regulator
modules, and other high-current, small size applications.
Glass ceramic monolithic structure provides stability
in application cycling
High-current rating in a small package allows more
efficient use in system space
Strong arc suppression in overcurrent conditions
Lead free materials and RoHS compliant
Halogen free
(refers to: Br900ppm, Cl900ppm, Br+Cl1500ppm)
Monolithic multilayer design
High-temperature performance
-55°C to +125°C operating temperature range
Communications equipment
Voltage regulator modules
Power supplies
Servers
Benefits Features
Applications
Surface-mount Fuses
High-Current-Rated Chip Fuses
88 RoHS Compliant, ELV Compliant HF Halogen Free
11
% of rated current Clear time at 25°C
100% 4 hours (min.)
250% 5 seconds (max.)
1206SFH Series
1206SFH100F/24 10 0.010 9 24 100
1206SFH120F/24 12 0.008 14 24 100
1206SFH150F/24 15 0.005 26 24 100
1206SFH200F/24 20 0.003 56 24 100
* Measured at 10% of rated current and 25°C ambient temperature.
Melting I2t at 0.001 sec clear time.
Part Number
Rated
Current
(A)
Nominal
Cold DCR
()*
Voltage
(VDC)
Current
(A)
1206 (3216mm) High-Current-Rated Chip Fuses
Shape and
Dimensions
Inch (mm)
Recommended
Pad Layout
Inch (mm)
0.063±0.008
(1. 6 0±0.20) 0.126±0.008
(3.20±0.20)
0.038±0.008
(0.97±0.20)
0.020±0.010
(0.51±0.25)
0.173
(4.40)
0.071
(1. 8 0)
0.057
(1. 4 5)
0.059
(1. 5 0)
Nominal
I2t
(A2sec)
Typical Electrical
Characteristics
Max.
Interrupt Ratings
10 1000100
Clear Time (s)
10
1
0.1
0.01
0.001
Current (A)
1206SFH Average Time Current Curves
10A
12A
15A
20A
0.001 0.01 0.1 1 10
10000
1000
100
10
1
I²t (A²s)
Time (s)
1206SFH I²t vs. t Curves
20A
15A
12A
10A
Figure FH2Figure FH1
Note: Curves are nominal
Table FH1 Clear Time Characteristics for High-Current-Rated Chip Fuses
Table FH2 Typical Electrical Characteristics, Dimensions and Recommended Pad Layout for
High-Current-Rated Chip Fuses
Figure FH1-FH2 Family Performance Curves for High-Current-Rated Chip Fuses
Please go to page 97 for more information for High-Current-Rated Chip Fuses.
89
Surface-mount Fuses Slow-Blow Chip Fuses
11
Available in industry standard 1206 and 0603 chip sizes,
TE Circuit Protection’s slow-blow chip fuses help
provide overcurrent protection on systems that
experience large and frequent current surges as part of
their normal operation.
The slow-blow chip fuse’s monolithic, multilayer design
helps provide some of the highest current ratings
available in the 1206 and 0603 footprints and enhances
high-temperature performance in a wide range of circuit
protection designs. The devices small size, high
reliability and strong arc suppression characteristics
make them suitable for overcurrent protection of power
supplies, capacitor filter banks, LCD (Liquid Crystal
Display) backlight inverters, electric motors and
portable electronics.
Time-delayed design prevents nuisance openings
in pulsed and high inrush current applications
Small size with high-current ratings
Strong arc suppression characteristics
Lead free materials and RoHS compliant
Halogen free
(refers to: Br900ppm, Cl900ppm, Br+Cl1500ppm)
Monolithic multilayer design
High-temperature performance
-55°C to +125°C operating temperature range
Small motors systems
Portable electronics
Input power ports
Benefits Features
Applications
Power over Ethernet (POE)
Test equipment
POL converter protection
Computer drives
Displays
Printers
Surface-mount Fuses
Slow-Blow Chip Fuses
90 RoHS Compliant, ELV Compliant HF Halogen Free
11
% of rated current Clear time at 25°C
100% 4 hours (min.)
200% 1 second (min.) 120 seconds (max.)
300% 0.1 second (min.) 3 seconds (max.)
800%(1.0A-1.5A) 0.0005 second (min.) 0.05 seconds (max.)
800%(2.0A-5.0A) 0.001 second (min.) 0.05 seconds (max.)
% of rated current Clear time at 25°C
100% 4 hours (min.)
200% 1 second (min.) 120 seconds (max.)
300% 0.1 second (min.) 3 seconds (max.)
800%(1.0A-1.5A) 0.0016 second (min.) 0.05 seconds (max.)
800%(2.0A-8.0A) 0.002 second (min.) 0.05 seconds (max.)
0603SFS Series 1206SFS Series
1206SFS100F/63 1.0 0.360 0.11 63 50
1206SFS125F/63 1.25 0.200 0.22 63 50
1206SFS150F/63 1.5 0.150 0.23 63 50
1206SFS200F/63 2.0 0.088 0.63 63 50
1206SFS250F/32 2.5 0.065 0.90 32 50
1206SFS300F/32 3.0 0.034 1.20 32 50
1206SFS350F/32 3.5 0.028 1.60 32 50
1206SFS400F/32 4.0 0.024 2.20 32 50
1206SFS450F/32 4.5 0.020 3.60 32 50
1206SFS500F/32 5.0 0.016 5.30 32 50
1206SFS550F/24 5.5 0.014 6.40 24 50
1206SFS600F/24 6.0 0.011 8.50 24 60
1206SFS700F/24 7.0 0.010 10.00 24 60
1206SFS800F/24 8.0 0.009 16.90 24 60
* Measured at 10% of rated current and 25°C ambient temperature.
Melting I2t at 0.001 sec clear time.
Part Number
Rated
Current
(A)
Nominal
Cold DCR
()*
Voltage
(VDC)
Current
(A)
1206 (3216mm) Slow-Blow Chip Fuses
0603 (1608mm) Slow-Blow Chip Fuses
Shape and
Dimensions
Inch (mm)
Recommended
Pad Layout
Inch (mm)
0.063±0.008
(1. 6 0±0.20) 0.126±0.008
(3.20±0.20)
0.038±0.008
(0.97±0.20)
0.020±0.010
(0.51±0.25)
0.173
(4.40)
0.071
(1. 8 0)
0.057
(1. 4 5)
0.059
(1. 5 0)
Nominal
I2t
(A2sec)
0603SFS100F/32 1.0 0.200 0.093 32 50
0603SFS150F/32 1.5 0.100 0.18 32 50
0603SFS200F/32 2.0 0.052 0.32 32 50
0603SFS250F/32 2.5 0.041 0.63 32 50
0603SFS300F/32 3.0 0.031 0.87 32 50
0603SFS350F/32 3.5 0.021 1.20 32 50
0603SFS400F/32 4.0 0.017 2.30 32 50
0603SFS450F/32 4.5 0.015 2.70 32 50
0603SFS500F/32 5.0 0.013 3.20 32 50
Part Number
Rated
Current
(A)
Nominal
Cold DCR
()*
Voltage
(VDC)
Current
(A)
Nominal
I2t
(A2sec)
Shape and
Dimensions
Inch (mm)
Recommended
Pad Layout
Inch (mm)
0.031±0.006
(0.80±0.15)
0
0.031±0.006
(0.80±0.15)
0.014±0.006
(0.36±0.15)
0.063±0.006
(1. 6 0±0.15)
0.110
(2.80)
0.039
(1.00)
0.043
(1. 0 9)
0.024
(0.60)
0
Typical Electrical
Characteristics
Max.
Interrupt Ratings
Typical Electrical
Characteristics
Max.
Interrupt Ratings
Table FS1 Clear Time Characteristics for Slow-Blow Chip Fuses
Table FS2 Typical Electrical Characteristics, Dimensions and Recommended Pad Layout for
Slow-Blow Chip Fuses
91
Surface-mount Fuses Slow-Blow Chip Fuses
RoHS Compliant, ELV Compliant HF Halogen Free
11
Clear Time (s)
100
10
1
0.1
0.01
0.001
10 1001
Current (A)
0603SFS Average Time Current Curves
1.0A
1.5A
2.0A
2.5A
3.0A
3.5A
4.0A
4.5A
5.0A
Figure FS1
I
2
t (A
2
s)
10,000
1000
100
10
1
0.1
0.01
0.001 0.01 10
0.1 1 100
Time (s)
0603SFS I²t vs. t Curves
1.0A
1.5A
2.0A
2.5A
3.0A
3.5A
4.0A
4.5A
5.0A
Figure FS2
Note: Curves are nominal
Figure FS1-FS4 Family Performance Curves for Slow-Blow Chip Fuses
92 RoHS Compliant, ELV Compliant HF Halogen Free
11
Clear Time (s)
100
10
1
0.1
0.01
0.001
10 100 1000
1
Current (A)
1206SFS Average Time Current Curves
1.0A
1.25A
1.5A
2.0A
2.5A
3.0A
3.5A
4.0A
4.5A
5.0A
5.5A
6.0A
7.0A
8.0A
Figure FS3
I
2
t (A
2
s)
100000
10000
1000
100
10
1
0.1
0.01
0.001 0.01 10
0.1 1 100
Time (s)
1206SFS I²t vs. t Curves
1.0A
1.5A
2.5A
3.0A
3.5A
4.0A
4.5A
5.0A
5.5A
6.0A
7.0A
8.0A
2.0A
1.25A
Figure FS4
Note: Curves are nominal
Figure FS1-FS4 Family Performance Curves for Slow-Blow Chip Fuses
Cont’d
Please go to page 97 for more information for Slow-Blow Chip Fuses.
93
Surface-mount Fuses 2410 Very Fast-Acting Fuses
11
The 2410(6125) is Wire-in Air SMD Fuse which is very
suitable for secondary level overcurrent protection
applications.
These lead-free surface mount devices offer more
reliability and have no end cap falling off risk. Straight
wire element in air performs consistent fusing and
cutting characteristics.
Very fast acting at 200% overload current level
Excellent inrush current withstanding capability
High reliability and resilience
Strong arc suppression characteristics
Copper terminal with nickel and tin plated
Halogen free, RoHS compliant and 100% lead-free
Copper or copper alloy composite fuse link
Fiberglass enforced epoxy fuse body
Wide range of current rating
-55°C to +125°C operating temperature range
(with de-rating)
Industrial equipment
LCD/PDP TV
Backlight inverter
Benefits Features
Applications
Power supplier
Telecom system
Networking
Game systems
White goods
Automotive
Surface-mount Fuses
2410 Very Fast-Acting Fuses
NEW
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
W
W
W
W
W
W
W
W
W
W
W
W
NEW
94 RoHS Compliant, ELV Compliant HF Halogen Free
11
% of rated current Clear time at 25°C
100% 4 hours (min.)
200% (0.5A-10.0A) 0.01 second (min.) 5 seconds (max.)
200% (12.0A-20.0A) 0.01 second (min.) 20 seconds (max.)
2410 (6125 mm) Very Fast-Acting Fuse
Shape and Dimensions
mm (Inch)
D
A
C
B
Table SFV1 Clear Time Characteristics for 2410 Very Fast-Acting Fuses
Table SFV2 Typical Electrical Characteristics, Dimensions and Recommended Pad Layout for
2410 Very Fast-Acting Fuses
Part Number
Typical Electrical Characteristics Max. Interrupt Ratings
Marking
Code
Rated
Current
(A)
Nominal
Cold DCR
()*
Nominal
I2t
(A2sec)
Voltage Current
(A)(VAC) (VDC)
2410SFV0.50FM/125-2 C 0.5 0.2310 0.10 250 125
50A @ 250VAC
50A @ 125VDC
300A @ 32VDC
2410SFV0.63FM/125-2 S 0.6 0.1740 0.16 250 125
2410SFV0.75FM/125-2 D 0.8 0.1480 0.23 250 125
2410SFV1.00FM/125-2 E 1.0 0.0930 0.59 250 125
2410SFV1.25FM/125-2 F 1.3 0.0700 0.96 250 125
2410SFV1.50FM/125-2 G 1.5 0.0620 1.19 125 125
50A @ 125VAC
50A @ 125VDC
300A @ 32VDC
2410SFV2.00FM/125-2 I 2.0 0.0420 2.75 125 125
2410SFV2.50FM/125-2 J 2.5 0.0310 1.21 125 125
2410SFV3.00FM/125-2 K 3.0 0.0249 1.73 125 125
2410SFV3.15FM/125-2 V 3.2 0.0232 2.20 125 125
2410SFV3.50FM/125-2 L 3.5 0.0220 2.50 125 125
2410SFV4.00FM/125-2 M 4.0 0.0172 4.10 125 125
2410SFV5.00FM/125-2 N 5.0 0.0143 5.90 125 125
2410SFV6.30FM/125-2 O 6.3 0.0100 12.50 125 125
2410SFV7.00FM/125-2 P 7.0 0.0094 14.20 125 125
2410SFV8.00FM/125-2 R 8.0 0.0086 20.30 125 125
2410SFV10.0FM/125-2 Q 10.0 0.0066 29.20 125 125
35A @ 125VAC
50A @ 125VDC
300A @ 32VDC
2410SFV12.0FM/065-2 X 12.0 0.0053 49.20 65 65 50A @ 65VAC
50A @ 65VDC
300A @ 32VDC
2410SFV15.0FM/065-2 Y 15.0 0.0038 102.50 65 65
2410SFV20.0FM/065-2 Z 20.0 0.0034 126.20 65 65
50A @ 65VAC
50A @ 65VDC
300A @ 32VDC
* Measured at 10% of rated current and 25°C ambient temperature.
Recommended Pad Layout
mm (Inch)
6.86
(0.270)
3.15
(0.124)
1.96
(0.077)
2.95
(0.116)
ABCD
Min Max Min Max Min Max Min Max
mm 5.95 6.25 1.96 2.36 0.97 1.73 2.34 2.64
in (0.234) (0.246) (0.077) (0.093) (0.038) (0.068) (0.092) (0.104)
95
Surface-mount Fuses 2410 Very Fast-Acting Fuses
RoHS Compliant, ELV Compliant HF Halogen Free
11
Please go to page 97 for more information for 2410 Fast-Acting Fuses.
Clear Time (s)
100
10
1
0.1
0.01
0.001
10 100010010.1
Current (A)
2410SFV Average Time Current Curves
0.63A
0.50A
0.75A
1.00A
1.25A
1.50A
2.0 0A
2.50A
3.00A
3.15A
3.50A
4.00A
5.00A
6.30A
7.00A
8.00A
10.0A
12.0A
15.0A
20.0A
Figure SFV1
I
2
t (A
2
s)
100,000
10,000
1000
100
10
1
0.1
0.01
0.010.001 10
0.1 1 100
Time (s)
2410SFV I
2
T vs. t Curves
1.00A
0.50A
0.63A
0.75A
1.50A
1.25A
2.00A
2.50A
3.00A
3.15A
3.50A
4.00A
5.00A
7.00A
8.00A
10.0A
12.0A
15.0A
20.0A
6.30A
Figure SFV2
Figure SFV1-SFV2 Family Performance Curves for 2410 Very Fast-Acting Fuses
Note: Curves are nominal
96
11
97
Surface-mount Fuses - Specifications for All Fuses
RoHS Compliant, ELV Compliant HF Halogen Free
11
Specifications, Packaging Information, Agency Approvals and
Part Numbering Systems for All Fuses
Operating temperature -55°C to +125°C
Mechanical vibration Withstands 5-3000 Hz at 30 Gs when evaluated per Method 204 of MIL-STD-202
Mechanical shock Withstands 1500 Gs, 0.5 millisecond half-sine pulses when evaluated per Method 213 of MIL-STD-202
Thermal shock Withstands 100 cycles from -65°C to +125°C when evaluated per Method 107 of MIL-STD-202
Resistance to soldering heat Withstands 60 seconds at +260°C when evaluated per Method 210 of MIL-STD-202
Solderability Meets 95% minimum coverage requirement when evaluated per Method 208 of MIL-STD-202
Moisture resistance Withstands 10 cycles when evaluated per Method 106 of MIL-STD-202
Salt spray Withstands 48-hour exposure when evaluated per Method 101 of MIL-STD-202
Storage temperature 30°C/ 85% RH
Storage humidity Per MIL-STD-202F, Method 106F
Construction body material Ceramic (1206/0603/0402); Fiberglass/Epoxy (2410)
Termination material Silver, Nickel, Tin
Fuse element Silver(1206/0603/0402); Copper/Copper Alloy (2410)
1206/0603/0402 Series
Temperature Effect on Current Rating
2410 Series
Temperature Effect on Current Rating
% De-rating
% De-rating
105
100
95
90
85
80
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
110
105
100
95
90
85
80
75
70
65
60
55
50
Maximum Operating Temperature (˚C) Maximum Operating Temperature (˚C)
-55 -35 -15 5 25 45 65 85 105 125 145 -55 -35 -15 5 25 45 65 85 105 125
Insulation resistance after opening
20,000minimum @ rated voltage. Fuse clearing under low voltage conditions may result in lower -
post-clearing insulation values. Under normal fault conditions TE Circuit Protection fuses provide
sufficient insulation resistance for circuit protection.
Current carrying capacity Withstands 100% rated current at +25°C ambient for 4 hours when evaluated per MIL-PRF-23419.
Table F1 Environmental Specifications for All Fuses
Table F2 Material Specifications for All Fuses
Figure F1 Thermal Derating Current for All Fuses
Table F3 Electrical Specifications for All Fuses
98 RoHS Compliant, ELV Compliant HF Halogen Free
11
Recommended conditions for hand soldering:
1. Using hot air rework station that can reflow the solder on both terminations at the same time is strongly recommended,
do not directly contact the chip termination with the tip of soldering iron.
2. Preheating: 150°C, 60s (min).
Appropriate temperature (max) of soldering iron tip/soldering time (max): 280°C /10s or 350°C / 3s.
0402(1005) 10,000 178mm white plastic 9.0 ± 0.5mm 8.00 ± 0.10mm Paper 5 1 to 10
0603(1608) 4,000 178mm white plastic 9.0 ± 0.5mm 8.00 ± 0.10mm Paper 5 1 to 10
0603SFV(1608) 6,000 178mm white plastic 9.0 ± 0.5mm 8.00 ± 0.10mm Paper 5 1 to 10
1206(3216) 3,000 178mm white plastic 9.0 ± 0.5mm 8.00 ± 0.10mm Plastic 5 1 to 10
2410(6125) 2,000 178mm white plastic 13.4 ± 0.5mm 12.00 ± 0.10mm Plastic 4 1 to 10
Size
Reel Quantity
(pcs) Reel Diameter Reel Width
Carrier
Tape Size Tape Type
Reels per Outside
Shipment Box
Outside Shipment
Boxes per Overpack
Table F4 Packaging Information for All Fuses
Figure F2 Recommended Soldering Temperature Profile for All Fuses
Profile Feature 1206/0603/0402 2410
Average ramp up rate (TsMAX to Tp) 3°C/second max. 3°C/second max.
Preheat
Temperature min. (TsMIN) 150°C 150°C
Temperature max. (TsMAX) 200°C 200°C
Time (tsMIN to tsMAX) 60-180 seconds 40-100 seconds
Time maintained above:
Temperature (TL) 217°C 200°C
Time (tL) 60-150 seconds 30-90 seconds
Peak/Classification temperature (Tp) 260°C max. 250°C max.
Time within 5°C of actual peak temperature
Time (tp) 20-40 seconds 30-40 seconds
From 25°C to preheating (150°C) 8 minutes max. 40-100 seconds
Ramp down rate 4°C/second max. Natural cooling
Critical Zone
T
L
to Tp
Ramp up
t 25˚C to Peak
Reflow Profile Time
Ramp down
ts
Preheat
Ts
MAX
T
L
Tp
tp
25
Ts
MIN
t
L
Te m perature
Classification Reflow Profiles
99
Surface-mount Fuses - Specifications for All Fuses
RoHS Compliant, ELV Compliant HF Halogen Free
11
P0
P0P2
P1
P1
E1
E1
F
F
W
W
t
D0
D0
D1
D1
A0
A0
B0
K0
K0
B0
P2
Paper CarrierTape Specifications
Plastic Carrier Tape Specifications
Table F5 Tape and Reel Specifications for All Fuses
Figure F3 Component Tape Dimensions for All Fuses
Dimension in inches (mm)
Mark 0402 (1005) 0603 (1608) 1206 (3216) 0603SFV (1608) 2410 (6125)
E10.069 ± 0.004 0.069 ± 0.004 0.069 ± 0.004 0.069 ± 0.004 0.069 ± 0.004
(1.75 ± 0.10) (1.75 ± 0.10) (1.75 ± 0.10) (1.75 ± 0.10) (1.75 ± 0.10)
F 0.138 ± 0.002 0.138 ± 0.002 0.138 ± 0.002 0.138 ± 0.002 0.217 ± 0.004
(3.50 ± 0.05) (3.50 ± 0.05) (3.50 ± 0.05) (3.50 ± 0.05) (5.50 ± 0.10)
W 0.315 ± 0.004 0.315 ± 0.004 0.315 ± 0.004 0.315 ± 0.004 0.472 ± 0.004
(8.00 ± 0.10) (8.00 ± 0.10) (8.00 ± 0.10) (8.00 ± 0.10) (12.00 ± 0.10)
P10.079 ± 0.004 0.157 ± 0.004 0.157 ± 0.004 0.157 ± 0.004 0.157 ± 0.004
(2.00 ± 0.10) (4.00 ± 0.10) (4.00 ± 0.10) (4.00 ± 0.10) (4.00 ± 0.10)
P00.157 ± 0.004 0.157 ± 0.004 0.157 ± 0.004 0.157 ± 0.004 0.157 ± 0.004
(4.00 ± 0.10) (4.00 ± 0.10) (4.00 ± 0.10) (4.00 ± 0.10) (4.00 ± 0.10)
P20.079 ± 0.002 0.079 ± 0.002 0.079 ± 0.002 0.079 ± 0.002 0.079 ± 0.004
(2.00 ± 0.05) (2.00 ± 0.05) (2.00 ± 0.05) (2.00 ± 0.05) (2.00 ± 0.10)
D00.059 ± 0.004 0.059 ± 0.004 0.059 ± 0.004 0.059 ± 0.004 0.059 ± 0.004
(1.50+0.10/-0.00) (1.50+0.10/-0.00) (1.50+0.10/-0.00) (1.50+0.10/-0.00) (1.50+0.10/-0.00)
D1——0.039 max 0.61 ± 0.004
(1.00 max) (1.55 ± 0.10)
t—0.009 ± 0.001 0.010 ± 0.002
(0.23 ± 0.02) (0.25 ± 0.05)
A00.026 ± 0.004 0.039 ± 0.004 0.071 ± 0.004 0.039 ± 0.004 0.112 ± 0.004
(0.67 ± 0.10) (0.98 ± 0.10) (1.80 ± 0.10) (0.98 ± 0.10) (2.85 ± 0.10)
B00.046 ± 0.004 0.071 ± 0.004 0.138 ± 0.004 0.071 ± 0.004 0.252 ± 0.004
(1.17 ± 0.10) (1.80 ± 0.10) (3.50 ± 0.10) (1.80 ± 0.10) (6.40 ± 0.10)
K00.025 ± 0.004 0.037 ± 0.003 0.050 ± 0.004 0.024 ± 0.003 0.093 ± 0.004
(0.63 ± 0.10) (0.95 ± 0.08) (1.27 ± 0.10) (0.60 ± 0.08) (2.35 ± 0.10)
100 RoHS Compliant, ELV Compliant HF Halogen Free
11
Dimension
Description Mark 1206/0603/0402 2410
Hub outer diameter B 60 60.2
Reel inside width W19 13.4
Reel outside width W211.4 16
Tape width 8
B
W2
W1
Figure F4 Reel Dimensions for All Fuses
Agency Approvals for All Fuses
UL File # E197536
Part Numbering System for Fast-Acting, Slow-Blow And 0603 Very Fast-Acting Chip Fuses
1206 SF F 400 F / 24 -2
Packaging
-2 = Tape and Reel
Voltage Rating
24 = 24VDC
Special Code
F = RoHS Compliant
FM = RoHS Compliant + Marked Part
Rated Current
050 = 0.50 Amps
400 = 4 Amps
Fuse Blow Type
F = Fast Acting
S = Slow Blow
SF = Surface Mount Fuse
Size (1206, 0603, 0402)
Part Numbering System for High-Current-Rated Chip Fuses
1206 SF H 100 F / 24 -2
Packaging
-2 = Tape and Reel
Voltage Rating
24 = 24VDC
Special Code
F = RoHS Compliant
FM = RoHS Compliant + Marked Part
Rated Current
100 = 10 Amps
Fuse Blow Type
H = High Current
SF = Surface Mount Fuse
Size (1206)
Dimension (mm)
101
Surface-mount Fuses - Specifications for All Fuses
RoHS Compliant, ELV Compliant HF Halogen Free
11
Part Numbering System for 2410 Very Fast-Acting Fuses
2410 SF V 6.30 FM / 125 -2
Packaging
-2 = Tape and Reel
Voltage Rating
125 = 125VDC
Special Code
F = RoHS Compliant
M = Marked Part
Rated Current
6.30= 6.30 Amps
Fuse Blow Type
V = Very Fast Acting
SF = Surface Mount Fuse
Size (0.24*0.10 inch)
Warning :
All information, including illustrations, is believed to be accurate and reliable. Users, however, should independently evaluate the suitability of and
test each product selected for their application. Tyco Electronics Corporation and/or its Affiliates in the TE Connectivity Ltd. family of companies
(“TE”) makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use.TE’s only obligations
are those in the TE Standard Terms and Conditions of Sale for this product, and in no case will TE be liable for any incidental, indirect, or
consequential damages arising from the sale, resale, use, or misuse of the product. Specifications are subject to change without notice. In
addition,TE reserves the right to make changes to materials or processing that do not affect compliance with any applicable specification without
notification to Buyer.
102
11